Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

7ton Diesel forklift — diesel counterbalance forklift

7ton Diesel forklift 7ton Diesel forklift, rated capacity 7000, lift height 3000. Open yards, timber stores, sites and port aprons are usual diesel duties.

7ton Diesel forklift — product photo 1 of 3
Why buyers pick this class Full specification →

Ordering facts for the 7ton Diesel forklift

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

7ton Diesel forklift specification

Values are copied from the source record in their original order and units.

7ton Diesel forklift specification table
ParameterValue
1.1 BrandSR
1.2 ModelFD70
1.3 PowerDiesel
1.4 Operation TypeSeated
1.5 Load capacity7000
1.6 Load center600
2.1 Tire TypePneumatic tire
2.2 Tire size, front8.25×15-14PR
2.3 Tire size, rear8.25×15-14PR
2.4 Number of wheels, front/rear4/2
3.1 Tilt of mast, forward/backward6/12
3.2 Lifting height3000
3.3 Mast height (lowered)2500
3.4 Height of overhead guard2480
3.5 Overall length (without fork)3650
3.6 Overall width2150
3.7 Fork size (LxWxT)1220×150×65
3.8 Ground clearance (wheelbase center)175
3.9 Turning radius (outside)3490
4.1 Travel speed, loaded/unloaded25/30
4.2 Lifting speed, load/unload440/470
4.3 Lowering speed, loaded/unloaded450/450
4.4 Max. Gradeability, loaded25
4.5 Max. Drawbar Pull, loaded5200
4.6 Transmission Control typeAutomatic
4.7 Steering typePower Steering
4.8 Parking brakeMechanical
4.9 Service brakeHydraulic
4.10 Battery12/80
4.11 Total weight9300
5.1 BrandSR
5.2 ModelS80
5.3 Engine typeWater-Cooled diesel engine
5.4 Rated Power80/2200
5.5 Rated torque354/1650
5.6 Number of cylinders6
5.7 Displacement5.7
5.8 Fuel tank capacity140
Request price Datasheet (print / save as PDF) Ask about voltage

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

7ton Diesel forklift 7ton Diesel forklift, part of the Diesel forklift trucks line.

Counterbalance diesel forklifts for outdoor yards, construction sites and port apron loading.

Yard spotting and stacking

Published figures for this build: rated capacity 7000 kg, lift height 3000, overall width 2150 mm, turning radius 3490 mm.

Diesel counterbalance trucks suit gravel, asphalt or packed earth.

Open yards, timber stores, sites and port aprons are usual diesel duties.

Diesel counterbalance trucks suit gravel, asphalt or packed earth.

Diesel power suits slopes and surfaces where an indoor truck would struggle.

Confirm the aisle width against the pallet depth before choosing a chassis. State any attachment required alongside the base model.

Specification walk-through

The specification sheet records Specification is not published in the source record; Brand: SR; Model: FD70; Power: Diesel; Operation Type: Seated; Load capacity (kg): 7000.

The specification sheet records Load center (mm): 600; Specification is not published in the source record; Tire Type: Pneumatic tire; Tire size, front: 8.25×15-14PR; Tire size, rear: 8.25×15-14PR; Number of wheels, front/rear: 4/2.

The specification sheet records Specification is not published in the source record; Tilt of mast, forward/backward: 6/12; Lifting height (mm): 3000; Mast height (lowered) (mm): 2500; Height of overhead guard (mm): 2480; Overall length (without fork) (mm): 3650.

The specification sheet records Overall width (mm): 2150; Fork size (LxWxT) (mm): 1220×150×65; Ground clearance (wheelbase center) (mm): 175; Turning radius (outside) (mm): 3490; Specification is not published in the source record; Travel speed, loaded/unloaded (km/h): 25/30.

The specification sheet records Lifting speed, load/unload (m/s): 440/470; Lowering speed, loaded/unloaded (m/s): 450/450; Max. Gradeability, loaded (%): 25; Max. Drawbar Pull, loaded (kn): 5200; Transmission Control type: Automatic; Steering type: Power Steering.

The specification sheet records Parking brake: Mechanical; Service brake: Hydraulic; Battery (V/Ah): 12/80; Total weight (kg): 9300; Specification is not published in the source record; Brand: SR.

The specification sheet records Model: S80; Engine type: Water-Cooled diesel engine; Rated Power (kw/rpm): 80/2200; Rated torque (n·m/rpm): 354/1650; Number of cylinders: 6; Displacement (L): 5.7.

The specification sheet records Fuel tank capacity (L): 140.

Options and attachments are listed separately from the base chassis.

Those missing values can be requested directly through the enquiry form.

Rated figures apply at the standard load centre unless a row says otherwise.

An em dash marks a value the source record did not publish.

How to specify the right build

For an internal combustion chassis, engine, tyre type and mast move the price most.

Door and beam heights decide which mast will clear the route.

Dimensions in the table come from the source record.

Check the machine weight against floor loading where the site is raised.

Compare the lowered height against the lowest door on the route.

Match the power arrangement to the shifts and the working environment.

Review the tyre type against the surface the machine will run on.

  • List attachments such as clamps, sideshift or rotator separately.
  • Send those figures with the model code; the reply confirms whether the chassis suits.
  • Mark the stations where loads are picked up and dropped off each shift.

Site preparation and operating notes

On the 7ton Diesel forklift, mark the stations where loads are picked up and dropped off each shift.

Send photographs of the racking and the existing working area when possible.

On the 7ton Diesel forklift, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.

Note any slope, threshold or step along the working route.

On the 7ton Diesel forklift, keep the charging or refuelling position clear of the main traffic aisle.

Operation and routine checks

On the 7ton Diesel forklift, the working area is kept clear of loose packaging and obstacles.

Battery or fuel levels are checked at the start of each shift.

On the 7ton Diesel forklift, loads are kept low while travelling between stations.

Unusual noise or movement is reported before further use.

How this model fits the operation

On the 7ton Diesel forklift, this machine usually works alongside pallet trucks and stacking equipment.

Attachments such as clamps or rotators are matched to the load shape.

On the 7ton Diesel forklift, a mixed enquiry can list this model together with other families.

The layout drawing shows where each machine sits in the operation.

Working conditions and honest limits

On the 7ton Diesel forklift, tyre choice should match the floor rather than the price list.

Any option not listed should be confirmed in writing before order.

On the 7ton Diesel forklift, attachments are quoted separately once the base chassis is fixed.

The specification sheet is the binding reference for listed values.

Delivery, documents and support

On the 7ton Diesel forklift, the booking reference is issued with the proforma invoice.

Quote the serial number and component name when ordering spares.

On the 7ton Diesel forklift, loading is recorded before the container is sealed.

Documents issued for an order are listed in the quotation.

The operation material covers controls, checks and routine service points.

The parts manual lists the wear items and their reference views.

Ask for the specific certificate required for your target country.

Before you order

  • Capacity shown is the rated figure at the stated load centre; above the rated lift height the capacity follows the mast curve.
  • Check overall width and turning space against the aisle and any narrow doorway before the chassis is shortlisted.
  • Any clamp, sideshift or rotator changes the load centre and must be listed alongside the base model.
  • The certificate set for an order follows the destination market; ISO factory certificates and the serial list ship with the consignment.
  • The parts manual ships with the machine; identify wear items by serial number and part name when reordering.

Container loading estimate

Published overall dimensions for this build are about 3.65 m long and 2.15 m wide.

On a standard 20GP dry-van floor that footprint allows about 1 unit(s) per layer; a 40HQ allows about 3 unit(s) per layer.

The count is a footprint estimate against standard dry-van internal dimensions, not a loading guarantee. Final blocking, bracing and stacking follow the loading plan confirmed before sealing, and this model can be combined with other families in one container where the floor allows.

The published height of about 2.48 m must be checked against the container door and interior headroom before booking; lowered mast or guard clearance decides entry.

Questions

Questions buyers ask before ordering

What load does the 7ton Diesel forklift carry?+

The listed rated capacity is 7000 at the standard load centre. Above the rated lift height capacity derates along the mast curve.

What lift height is available?+

The specification sheet lists 3000 for this build. Send the rack beam and door heights together to size the mast.

What power unit does it use?+

The listed power arrangement is Diesel. Confirm the supply voltage or fuel type for your site before ordering.

Which tyres are fitted?+

The listed tyre type is Pneumatic tire. Solid tyres suit sealed concrete; pneumatic tyres suit rough outdoor ground.

What load centre applies to the rating?+

The specification lists a load centre of 600. Loads carried farther forward reduce rated capacity.

What aisle width does it need?+

The listed turning radius is 3490. Aisle width also depends on pallet depth and fork length.

What is the machine weight?+

The listed service or net weight is 9300. This matters for floor loading, ramps and container plans.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Diesel forklift trucks related models

ModelCapacityLiftPowerTypical use
FD30—3000 mmDieselYard spotting and stacking
LG50—3000 mmDieselOutdoor yard loading
FD20—3000 mm—Construction and site duties
LG45—3000 mmDieselYard spotting and stacking
LG80—3000 mmDieselTimber and bulk stores

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.