Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

LG45 — diesel counterbalance forklift

LG45 Diesel Forklift, lift height 3000 mm. Open yards, timber stores, sites and port aprons are usual diesel duties.

LG45 diesel counterbalance forklift — product photo 1 of 1
Why buyers pick this class Full specification →

Ordering facts for the LG45

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

LG45 specification

Values are copied from the source record in their original order and units.

LG45 specification table
ParameterValue
ModelFD40T / FD45 / FD50
Power TypeDiesel
Load Capacity4000 / 4500 / 5000 kg
Load centre500 mm
TyrePneumatic Tyre
Front Tyre250-15-16PR / 300-15-18PR
Rear Tyre6.50-10-10PR / 7.00-12-12PR
Lift Height3000 mm
Fork SizeL×W×T / mm / 1070×125×50 / 1070×150×55
Mast Tilt Angle6/12
Mast Lowered Height2195 / 2330 mm
Mast Extended Height4180 / 4165 mm
Length to face of fork2890 / 3245 mm
Overall Width1410 / 1430 mm
Overhead Guard Height2120 / 2340 mm
Request price Datasheet (print / save as PDF) Ask about fuel type

What this model is built to do

LG45 Diesel Forklift, part of the Diesel forklift trucks line.

Counterbalance diesel forklifts for outdoor yards, construction sites and port apron loading.

Yard spotting and stacking

Published figures for this build: rated capacity 4000 / 4500 / 5000 kg, lift height 3000 mm, overall width 1410 / 1430 mm, tyre pneumatic tyre.

This class is specified for outdoor work and standing dust.

Diesel counterbalance trucks suit gravel, asphalt or packed earth.

Diesel power suits slopes and surfaces where an indoor truck would struggle.

Diesel power suits slopes and surfaces where an indoor truck would struggle.

Compare rated capacity against the heaviest single load you move. Match the tyre type to the floor surface rather than the price list.

Specification walk-through

The specification sheet records Specification is not published in the source record; Model: FD40T / FD45 / FD50; Power Type: Diesel; Load Capacity (kg): 4000 / 4500 / 5000 kg; Load centre (mm): 500 mm; Specification is not published in the source record.

The specification sheet records Tyre: Pneumatic Tyre; Front Tyre: 250-15-16PR / 300-15-18PR; Rear Tyre: 6.50-10-10PR / 7.00-12-12PR; Specification is not published in the source record; Lift Height (mm): 3000 mm; Fork Size: L×W×T / mm / 1070×125×50 / 1070×150×55.

The specification sheet records Mast Tilt Angle (f/r): 6/12; Mast Lowered Height (mm): 2195 / 2330 mm; Mast Extended Height (with backrest): 4180 / 4165 mm; Length to face of fork (Without fork): 2890 / 3245 mm; Overall Width (mm): 1410 / 1430 mm; Overhead Guard Height (mm): 2120 / 2340 mm.

Units are copied as published; convert them only when comparing models.

Rated figures apply at the standard load centre unless a row says otherwise.

An em dash marks a value the source record did not publish.

Options and attachments are listed separately from the base chassis.

How to specify the right build

For an internal combustion chassis, engine, tyre type and mast move the price most.

Dimensions in the table come from the source record.

The listed figures follow the record; options are confirmed on the quotation.

Check the chassis width against the aisle and the container door.

Compare the lowered height against the lowest door on the route.

Compare capacity first, then the lift height the job actually needs.

Check the machine weight against floor loading where the site is raised.

  • List attachments such as clamps, sideshift or rotator separately.
  • Mark the stations where loads are picked up and dropped off each shift.
  • Send those figures with the model code; the reply confirms whether the chassis suits.

Site preparation and operating notes

On the LG45, check the lowest door, beam height and aisle the truck has to pass through.

Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.

On the LG45, send photographs of the racking and the existing working area when possible.

Keep the charging or refuelling position clear of the main traffic aisle.

On the LG45, measure the pallet footprint and the heaviest single load before comparing models.

Operation and routine checks

On the LG45, unusual noise or movement is reported before further use.

The operator follows the rated capacity marked on the chassis.

On the LG45, attachments are secured before the machine leaves the station.

Loads are kept low while travelling between stations.

How this model fits the operation

On the LG45, the receiving side pairs it with a dock ramp or platform where needed.

Attachments such as clamps or rotators are matched to the load shape.

On the LG45, spare parts for wear items follow the parts manual after delivery.

Storage cages and racking organise the loads it moves between stations.

Working conditions and honest limits

On the LG45, attachments are quoted separately once the base chassis is fixed.

The signed datasheet issued with the quotation is the binding version.

On the LG45, the specification sheet is the binding reference for listed values.

Tyre choice should match the floor rather than the price list.

Delivery, documents and support

On the LG45, documents issued for an order are listed in the quotation.

Mixed equipment can be listed on one enquiry.

On the LG45, packing follows sea-freight practice for the chosen chassis.

Wear parts are supplied after delivery against the parts manual.

The operation material covers controls, checks and routine service points.

Test and conformity documents follow the model and destination market.

The serial number identifies the build when parts are ordered later.

Before you order

  • Capacity shown is the rated figure at the stated load centre; above the rated lift height the capacity follows the mast curve.
  • Dimensions in the specification come from the source record — check them against the container door, the lowest door on the route and the aisle before ordering.
  • Any clamp, sideshift or rotator changes the load centre and must be listed alongside the base model.
  • Documents issued with the order: ISO 9001, ISO 14001 and ISO 18001 factory certificates, plus CE or GS where the model carries it, and the serial list for the shipment.
  • The parts manual ships with the machine; identify wear items by serial number and part name when reordering.

Questions

Questions buyers ask before ordering

What lift height is available?+

The specification sheet lists 3000 mm for this build. Send the rack beam and door heights together to size the mast.

What power unit does it use?+

The listed power arrangement is Diesel. Confirm the supply voltage or fuel type for your site before ordering.

Which tyres are fitted?+

The listed tyre type is Pneumatic Tyre. Solid tyres suit sealed concrete; pneumatic tyres suit rough outdoor ground.

What load centre applies to the rating?+

The specification lists a load centre of 500 mm. Loads carried farther forward reduce rated capacity.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Diesel forklift trucks related models

ModelCapacityLiftPowerTypical use
FD30—3000 mmDieselYard spotting and stacking
LG50—3000 mmDieselOutdoor yard loading
FD20—3000 mm—Construction and site duties
LG80—3000 mmDieselTimber and bulk stores
CPCD35———Outdoor yard loading

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.