Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

LG50 LG60 LG70 — diesel counterbalance forklift

LG50 LG60 LG70 Diesel Forklift, lift height 3000 mm. Diesel power suits slopes and surfaces where an indoor truck would struggle.

LG50 LG60 LG70 diesel counterbalance forklift — product photo 1 of 1
Why buyers pick this class Full specification →

Ordering facts for the LG50 LG60 LG70

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

LG50 LG60 LG70 specification

Values are copied from the source record in their original order and units.

LG50 LG60 LG70 specification table
ParameterValue
ModelFD50 / FD60 / FD70 / FD80
Power TypeDiesel
Load Capacity5000 / 6000 / 7000 / 8000 kg
Load centre600 mm
TyrePneumatic Tyre
Front Tyre8.25-15-14PR / 8.25-15-18PR
Rear Tyre8.25-15-14PR / 8.25-15-18PR
Lift Height3000 mm
Fork SizeL×W×T / mm / 1220×150×60 / 1220×150×70
Mast Tilt Angle6/12
Mast Lowered Height2500 mm
Mast Extended Height4415 mm
Length to face of fork3450 / 3560 mm
Overall Width2010 mm
Overhead Guard Height2470 mm
Request price Datasheet (print / save as PDF) Ask about fuel type

What this model is built to do

LG50 LG60 LG70 Diesel Forklift, part of the Diesel forklift trucks line.

Counterbalance diesel forklifts for outdoor yards, construction sites and port apron loading.

Outdoor yard loading

Published figures for this build: rated capacity 5000 / 6000 / 7000 / 8000 kg, lift height 3000 mm, overall width 2010 mm, tyre pneumatic tyre.

The chassis is built for repeated outdoor loading and unloading runs.

The chassis is built for repeated outdoor loading and unloading runs.

Open yards, timber stores, sites and port aprons are usual diesel duties.

The chassis is built for repeated outdoor loading and unloading runs.

Check closed mast or chassis height against the lowest door on the route. Describe the shifts per day when the power arrangement is selected.

Specification walk-through

The specification sheet records Model: FD50 / FD60 / FD70 / FD80; Power Type: Diesel; Load Capacity (kg): 5000 / 6000 / 7000 / 8000 kg; Load centre (mm): 600 mm; Specification is not published in the source record; Tyre: Pneumatic Tyre.

The specification sheet records Front Tyre: 8.25-15-14PR / 8.25-15-18PR; Rear Tyre: 8.25-15-14PR / 8.25-15-18PR; Specification is not published in the source record; Lift Height (mm): 3000 mm; Fork Size: L×W×T / mm / 1220×150×60 / 1220×150×70; Mast Tilt Angle (f/r): 6/12.

The specification sheet records Mast Lowered Height (mm): 2500 mm; Mast Extended Height (with backrest): 4415 mm; Length to face of fork (Without fork): 3450 / 3560 mm; Overall Width (mm): 2010 mm; Overhead Guard Height (mm): 2470 mm.

Options and attachments are listed separately from the base chassis.

Those missing values can be requested directly through the enquiry form.

Each row in the table keeps the label and value from the source record.

An em dash marks a value the source record did not publish.

How to specify the right build

For an internal combustion chassis, engine, tyre type and mast move the price most.

Dimensions in the table come from the source record.

Door and beam heights decide which mast will clear the route.

Compare capacity first, then the lift height the job actually needs.

Match the power arrangement to the shifts and the working environment.

Check the chassis width against the aisle and the container door.

Note any attachment that changes the load centre or the overall width.

  • Mark the stations where loads are picked up and dropped off each shift.
  • List attachments such as clamps, sideshift or rotator separately.
  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.

Site preparation and operating notes

On the LG50 LG60 LG70, note any slope, threshold or step along the working route.

Send photographs of the racking and the existing working area when possible.

On the LG50 LG60 LG70, keep the charging or refuelling position clear of the main traffic aisle.

State the shifts per day so the power arrangement can be sized properly.

On the LG50 LG60 LG70, check the lowest door, beam height and aisle the truck has to pass through.

Operation and routine checks

On the LG50 LG60 LG70, the operator follows the rated capacity marked on the chassis.

Battery or fuel levels are checked at the start of each shift.

On the LG50 LG60 LG70, the operator checks load stability before each lift or move.

Loads are kept low while travelling between stations.

How this model fits the operation

On the LG50 LG60 LG70, the receiving side pairs it with a dock ramp or platform where needed.

Related models in the same group are listed on the family page.

On the LG50 LG60 LG70, attachments such as clamps or rotators are matched to the load shape.

Spare parts for wear items follow the parts manual after delivery.

Working conditions and honest limits

On the LG50 LG60 LG70, any option not listed should be confirmed in writing before order.

Tyre choice should match the floor rather than the price list.

On the LG50 LG60 LG70, the specification sheet is the binding reference for listed values.

Site conditions such as gradient, dust and moisture belong in the enquiry.

Delivery, documents and support

On the LG50 LG60 LG70, the booking reference is issued with the proforma invoice.

Mixed equipment can be listed on one enquiry.

On the LG50 LG60 LG70, loading is recorded before the container is sealed.

The operation and parts material travel with the machine.

Test and conformity documents follow the model and destination market.

The parts manual lists the wear items and their reference views.

The operation material covers controls, checks and routine service points.

Before you order

  • Compare the published capacity against the heaviest single move before the mast or attachment is chosen.
  • Dimensions in the specification come from the source record — check them against the container door, the lowest door on the route and the aisle before ordering.
  • Attachments are quoted separately once the base chassis is fixed, so the attachment weight can be counted against the residual capacity.
  • The certificate set for an order follows the destination market; ISO factory certificates and the serial list ship with the consignment.
  • The parts manual ships with the machine; identify wear items by serial number and part name when reordering.

Questions

Questions buyers ask before ordering

What lift height is available?+

The specification sheet lists 3000 mm for this build. Send the rack beam and door heights together to size the mast.

What power unit does it use?+

The listed power arrangement is Diesel. Confirm the supply voltage or fuel type for your site before ordering.

Which tyres are fitted?+

The listed tyre type is Pneumatic Tyre. Solid tyres suit sealed concrete; pneumatic tyres suit rough outdoor ground.

What load centre applies to the rating?+

The specification lists a load centre of 600 mm. Loads carried farther forward reduce rated capacity.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Diesel forklift trucks related models

ModelCapacityLiftPowerTypical use
FD30—3000 mmDieselYard spotting and stacking
FD20—3000 mm—Construction and site duties
LG45—3000 mmDieselYard spotting and stacking
LG80—3000 mmDieselTimber and bulk stores
CPCD35———Outdoor yard loading

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.