Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

LG80 LG100 — diesel counterbalance forklift

LG80 LG100 Diesel Forklift, lift height 3000 mm. Open yards, timber stores, sites and port aprons are usual diesel duties.

LG80 LG100 diesel counterbalance forklift — product photo 1 of 4
Why buyers pick this class Full specification →

Ordering facts for the LG80 LG100

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

LG80 LG100 specification

Values are copied from the source record in their original order and units.

LG80 LG100 specification table
ParameterUnitFD100FD120
Model—FD100FD120
Power Type—Diesel
Load Capacitykg1000012000
Load centremm600 mm
Tyre—PneumaticTyre
Front Tyre—9.00-20-14PR11.00-20-16PR
Rear Tyre—9.00-20-14PR9.00-20
Lift Heightmm3000 mm
Fork Size—L×W×T / mm / 1520×175×85 / 1520×180×100
Mast Tilt Anglef/r612
Mast Lowered Heightmm28303080
Mast Extended Heightwith backrest43354500
Length to face of forkWithout fork42804700
Overall Widthmm21702200
Overhead Guard Heightmm25702590
Request price Datasheet (print / save as PDF) Ask about fuel type

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

LG80 LG100 Diesel Forklift, part of the Diesel forklift trucks line.

Counterbalance diesel forklifts for outdoor yards, construction sites and port apron loading.

Timber and bulk stores

Published figures for this build: rated capacity 10000 / 12000 kg, lift height 3000 mm, overall width 2170 / 2200 mm, tyre pneumatic tyre.

Diesel power suits slopes and surfaces where an indoor truck would struggle.

Open yards, timber stores, sites and port aprons are usual diesel duties.

Diesel power suits slopes and surfaces where an indoor truck would struggle.

This class is specified for outdoor work and standing dust.

Compare rated capacity against the heaviest single load you move. Confirm the charger voltage or fuel type for your destination country.

Specification walk-through

The specification sheet records Model: FD100 / FD120; Power Type: Diesel; Load Capacity (kg): 10000 / 12000; Load centre (mm): 600 mm; Specification is not published in the source record; Tyre: Pneumatic / Tyre.

The specification sheet records Front Tyre: 9.00-20-14PR / 11.00-20-16PR; Rear Tyre: 9.00-20-14PR / 9.00-20; Specification is not published in the source record; Lift Height (mm): 3000 mm; Fork Size: L×W×T / mm / 1520×175×85 / 1520×180×100; Mast Tilt Angle (f/r): 6 / 12.

The specification sheet records Mast Lowered Height (mm): 2830 / 3080; Mast Extended Height (with backrest): 4335 / 4500; Length to face of fork (Without fork): 4280 / 4700; Overall Width (mm): 2170 / 2200; Overhead Guard Height (mm): 2570 / 2590.

Those missing values can be requested directly through the enquiry form.

Each row in the table keeps the label and value from the source record.

Rated figures apply at the standard load centre unless a row says otherwise.

Units are copied as published; convert them only when comparing models.

How to specify the right build

For an internal combustion chassis, engine, tyre type and mast move the price most.

Dimensions in the table come from the source record.

Measure the pallet footprint before the chassis is shortlisted.

Check the machine weight against floor loading where the site is raised.

Check the chassis width against the aisle and the container door.

Note any attachment that changes the load centre or the overall width.

Review the tyre type against the surface the machine will run on.

  • Mark the stations where loads are picked up and dropped off each shift.
  • Send those figures with the model code; the reply confirms whether the chassis suits.
  • State the shifts per day so the power arrangement can be sized properly.

Site preparation and operating notes

On the LG80 LG100, check the lowest door, beam height and aisle the truck has to pass through.

Send photographs of the racking and the existing working area when possible.

On the LG80 LG100, mark the stations where loads are picked up and dropped off each shift.

Measure the pallet footprint and the heaviest single load before comparing models.

On the LG80 LG100, check headroom under beams, pipes and door frames along the route.

Operation and routine checks

On the LG80 LG100, the operator follows the rated capacity marked on the chassis.

Unusual noise or movement is reported before further use.

On the LG80 LG100, battery or fuel levels are checked at the start of each shift.

Routine checks cover tyres, brakes, controls and visible leaks.

How this model fits the operation

On the LG80 LG100, the receiving side pairs it with a dock ramp or platform where needed.

Spare parts for wear items follow the parts manual after delivery.

On the LG80 LG100, this machine usually works alongside pallet trucks and stacking equipment.

The layout drawing shows where each machine sits in the operation.

Working conditions and honest limits

On the LG80 LG100, attachments are quoted separately once the base chassis is fixed.

The specification sheet is the binding reference for listed values.

On the LG80 LG100, tyre choice should match the floor rather than the price list.

Dimensions are checked against the source record before quoting.

Delivery, documents and support

On the LG80 LG100, the booking reference is issued with the proforma invoice.

Wear parts are supplied after delivery against the parts manual.

On the LG80 LG100, the operation and parts material travel with the machine.

Mixed equipment can be listed on one enquiry.

The serial number identifies the build when parts are ordered later.

The operation material covers controls, checks and routine service points.

Test and conformity documents follow the model and destination market.

Before you order

  • The rated load applies at the standard load centre; carrying the load farther forward reduces the figure marked on the chassis plate.
  • Check overall width and turning space against the aisle and any narrow doorway before the chassis is shortlisted.
  • Attachment options are confirmed on the quotation; their weight and width are counted against the residual capacity.
  • The certificate set for an order follows the destination market; ISO factory certificates and the serial list ship with the consignment.
  • Wear parts are ordered after delivery against the parts manual, the serial number and the component name.

Questions

Questions buyers ask before ordering

What lift height is available?+

The specification sheet lists 3000 mm for this build. Send the rack beam and door heights together to size the mast.

What power unit does it use?+

The listed power arrangement is Diesel. Confirm the supply voltage or fuel type for your site before ordering.

Which tyres are fitted?+

The listed tyre type is Pneumatic Tyre. Solid tyres suit sealed concrete; pneumatic tyres suit rough outdoor ground.

What load centre applies to the rating?+

The specification lists a load centre of 600 mm. Loads carried farther forward reduce rated capacity.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Diesel forklift trucks related models

ModelCapacityLiftPowerTypical use
FD30—3000 mmDieselYard spotting and stacking
LG50—3000 mmDieselOutdoor yard loading
FD20—3000 mm—Construction and site duties
LG45—3000 mmDieselYard spotting and stacking
CPCD35———Outdoor yard loading

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.