Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote
15 equipment familiesForklifts to racking Find a model by loadMatch pallet weight to capacity Datasheets & specs257 model pages Request a quotationImporters, dealers, fleets

01 / One-stop practice

Three packages buyers actually order

A first order is rarely one machine. These are the three mixes that leave the factory most often, each sized from your aisle width and pallet weight and then loaded together.

Ask for a package quote
Electric stacker LES series working in a narrow warehouse aisle
Package 01

New warehouse fit-out

Trucks, stackers and racking sized to the same aisle so the first pallet does not jam on day one.

  • 1–2 counterbalance trucks
  • 1–2 stackers for aisles under 2 m
  • 6–10 hand pallet trucks
  • Racking and wire mesh containers
See the equipment list
HP-50 hand pallet truck rated to 5 tonnes, pump detail
Package 02

Dock and pallet flow

The receiving side: everything between the container door and the rack face.

  • Hand pallet trucks, 5 t
  • Electric platform trucks for internal runs
  • Dock ramps and lift tables
  • Tail lifts for truck beds
Price the dock kit
WCR-GR vacuum lifter handling a glass panel on site
Package 03

Glass, stone and steel plate

Vacuum handling and access equipment for facade and shopfitting crews.

  • WCR-GR vacuum lifters, 8 pad configurations
  • 12 V battery or crane hook operation
  • Aerial work platforms
  • Spare pads, pumps and seals
Ask for a load test certificate

02 / How the order runs

From aisle width to container loading

Four steps, one contact person, and a drawing signed off before anything is cut.

01

Send the numbers

Aisle width, pallet weight, lift height, floor surface and destination port. A photograph of the racking helps more than a description.

02

Get a sized list

Model list with mast, battery and charger voltage for your country, plus a layout drawing showing how the machines fit the aisle.

03

Confirm and produce

Deposit, drawing sign-off, then production. Photographs at chassis, assembly and pre-shipment inspection stages.

04

One container, one B/L

Mixed loading across families, consolidated documents, and the booking confirmation issued with the proforma invoice.

Product catalogue

Everything we build: 15 families, 257 models

Each family page lists the models, capacities, mast options and the datasheet. The catalogue is organised for buyers who compare machines line by line.

Ask for the equipment list
Diesel forklift trucks
9 models

Diesel forklift trucks

Diesel counterbalance trucks, 2–12 t, for outdoor yards, construction sites and port apron loading.

View the range →
Electric forklift trucks
11 models

Electric forklift trucks

Battery counterbalance and multi-directional trucks, 0.6–3.5 t, for sealed-floor warehouses and racking aisles.

View the range →
LPG and gas forklift trucks
7 models

LPG and gas forklift trucks

LPG and gasoline counterbalance trucks, 1–7 t, for mixed indoor-outdoor loading and unloading.

View the range →
Reach stackers
10 models

Reach stackers

Reach stackers and straddle trucks, 1–2.5 t, that store loads deep in narrow-aisle racking.

View the range →
Stackers and order pickers
33 models

Stackers and order pickers

Walk-behind and ride-on stackers, 0.2–3 t, plus order pickers for pallet put-away at height.

View the range →
Pallet trucks
25 models

Pallet trucks

Hand, semi-electric and powered pallet trucks, 1–6 t, for horizontal pallet transport.

View the range →
Drum handlers
11 models

Drum handlers

Drum carriers, clamps and rotators, 300–500 kg, for lifting, tipping and moving cylindrical containers.

View the range →
Lift tables
20 models

Lift tables

Electric and hydraulic lift tables, 0.1–2 t, for dock feeding, packing and work positioning.

View the range →
Electric tow tractors
9 models

Electric tow tractors

Electric tow tractors and tuggers, 0.5–4 t, that pull trailer trains along factory routes.

View the range →
Aerial work platforms
14 models

Aerial work platforms

Scissor, boom and vertical-mast platforms, 160–480 kg, for maintenance, fit-out and installation at height.

View the range →
Dock ramps
7 models

Dock ramps

Mobile container ramps, 1–12 t, that bridge ground and trailer bed without a dock.

View the range →
Conveyors
9 models

Conveyors

Roller, skate-wheel and telescopic conveyors, 200–300 kg/m, for carton and bag flow into containers.

View the range →
Vacuum lifters
19 models

Vacuum lifters

Suction lifters and frames, 200–1400 kg, for glass, stone, metal sheet and panel installation.

View the range →
Storage systems
28 models

Storage systems

Racking, wire mesh containers, pallets and decking for pallet and bulk-goods storage.

View the range →
Special-purpose handling equipment
45 models

Special-purpose handling equipment

Hand trolleys, clamps, attachments and auxiliary tools for special handling tasks.

View the range →
01

Machines built on site

Chassis, mast and hydraulic assembly in the same Guangzhou plant you are quoted from, with no trading layer in between.

02

Inspection before loading

Load test, mast check and battery cycle photographed at pre-shipment. The report travels with the serial number list.

03

Mixed containers

Forklifts, stackers and pallet trucks blocked and braced in one 20 or 40 ft box, photographed before sealing.

04

Spares held in Guangzhou

Wear parts, controllers, wheels and seal kits dispatched by courier after confirmation.

Model finder

Start from the load, not from the model code

Most buyers know the pallet weight and the aisle width before they know which machine they need.

Send your load spec
0.15 t6 wheels climb stair steel hand truck SR150T
0.15 tTF15 TF15A
0.15 tfoldable 6 wheels climb stair hand trolley SR150TA
0.2 tGravity Roller Conveyor Moudle
0.2 tMini Vacuum lifter 200kgs
0.2 tMini manual vacuum lifter
0.2 tSEP2-2.7 / SEP2-3.3 / SEP2-4.0 / SEP2-4.5

Rated capacity at the standard load centre. Derating applies above the rated lift height; the mast curve is confirmed against your rack beams.

After the container

What arrives with the machine

A forklift is a long-term asset. The paperwork, the spares kit and the operating material decide whether it stays in service.

A

Documents

Each shipment leaves with the document set listed in the quotation.

  • Declaration of conformity where applicable
  • Test report and serial list
  • Operation and parts manual
B

Spare parts

Wear parts are supplied after delivery against the parts manual.

  • Seal kits, wheels, controllers
  • Battery and charger supply
  • Parts manual with views
C

Container loading

Machines are blocked and braced for sea freight; loading is recorded before sealing.

  • Mixed containers across families
  • LCL from one unit
  • Loading photos before sealing

Video on every model page

Each model page carries its own machine video

35 clips are matched to the model they show. Buyers watch the machine work before they ask for a price, so the clip opens on the model page itself. The home page does not carry a player.

Open the videos page

youtube.com/@mingyang4777

Buyer questions

Questions we answer every week

Capacity, charger voltage, certification, mixed loading, spares, aisle width, payment and OEM.

What information do you need for a quotation?+

Send the load per move, the lift height, the floor or ground surface, the quantity and the destination port. The reply matches a chassis to those figures and lists the delivery term.

How is the charger arranged for an electric truck?+

Electric trucks are paired with a charger set for the destination voltage and plug. State the country and supply standard in the enquiry so the matching charger is quoted.

Which certifications accompany the machines?+

The factory holds ISO 9001, ISO 14001 and ISO 18001 certificates. Most products carry CE or GS certificates from TÜV Rheinland Group. The documents issued for an order are listed in the quotation.

Can one order mix several equipment families?+

Yes. Forklifts, stackers, pallet trucks and storage equipment can be listed on one enquiry and loaded together where container size allows. LCL is arranged when a full container is not reached.

How are spare parts handled after delivery?+

Each machine ships with a parts manual. Wear parts are supplied after delivery; quote the serial number and component name so the correct part is identified.

Can a machine be sized to a specific aisle?+

Send the aisle width, rack beam height and load weight. The mast, power unit and overall width are checked against those numbers, and the layout is confirmed before production.

Which payment terms apply?+

Payment terms are agreed on the proforma invoice once the model and quantity are fixed. Details are discussed when the enquiry is answered.

Is OEM branding possible?+

Decals, colour, nameplate and the manual cover can be arranged for the buyer's brand where volume allows. The minimum for custom decals is confirmed per model.

Certification ISO 9001Quality management ISO 14001Environmental ISO 18001Occupational safety CE & GSTÜV Rheinland Group

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.