Freight cost per unit is set by the packing method, not by the unit price. Plan the container before you confirm the model.
Forklifts are shipped with the mast lowered to its minimum height. Tall masts may be partly dismantled, and the forks, overhead guard and some panels are packed separately to save height.
Each unit is blocked and lashed inside the container; batteries are disconnected and, for lithium models, handled as dangerous goods with the matching declaration.
A 20ft container suits a small first order and one or two units, and keeps the freight per sailing low. A 40ft high-cube gives the extra door height that tall masts need, and lowers the freight cost per unit once the order is large enough to fill it.
For mixed orders — a forklift plus pallet trucks plus racking — the container plan usually mixes units and loose items rather than shipping separate boxes.
Check the lashings and the packing list before unloading, and photograph any damage before the container is emptied. Mast alignment and tyre condition are the two items most often affected by handling in transit.
Models
Published figures for the first 8 models of this family; open a model page for the full specification.
Forklift shipping and container planning model comparison
Questions
Often yes, if the mast is lowered or partly dismantled; the door height after packing is the figure that decides it, so ask for packed dimensions.
It depends on unit length, packed height and weight, so the answer is a container plan per model rather than a general number.
Guangzhou, Shenzhen or Nansha.
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.