3ton Diesel forklift 3ton Diesel forklift. Diesel power suits slopes and surfaces where an indoor truck would struggle.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| 1 Model | FD30; FD35; FD38; FD40 |
| 2 Power Type | FD30: Diesel; FD35: Diesel; FD38: Diesel; FD40 |
| 3 Rated Capacity | FD30: 3000; FD35: 3500; FD38: 3800; FD40: 4000 |
| 4 Load Centre | FD30: 500; FD35: 500; FD38: 500; FD40: 500 |
| 5 Lift Height | FD30: 3000; FD35: 3000; FD38: 3000; FD40: 3000 |
| 6 Fork Size L×W×T | FD30: 1070×125×45; FD35: 1070×125×50; FD38: 1070×125×50; FD40: 1070×125×50 |
| 7 Mast Tilt Angle F/R | FD30: 6°/12°; FD35: 6°/12°; FD38: 6°/12°; FD40: 6°/12° |
| 8 Front Overhang (Wheel center to fork face) | FD30: 480; FD35: 485; FD38: 485; FD40: 495 |
| 9 Ground Clearance (Bottom of mast) | FD30: 140; FD35: 140; FD38: 140; FD40: 140 |
| 10 Length to face of fork (Without fork) | FD30: 2780; FD35: 2835; FD38: 2835; FD40: 2890 |
| 11 Overall Width | FD30: 1230; FD35: 1230; FD38: 1230; FD40: 1410 |
| 12 Mast Lowered Height | FD30: 2115; FD35: 2150; FD38: 2150; FD40: 2195 |
| 13 Mast Extended Height (With backrest) | FD30: 4175; FD35: 4175; FD38: 4175; FD40: 4180 |
| 14 Overhead Guard Height | FD30: 2110; FD35: 2110; FD38: 2110; FD40: 2120 |
| 15 Turning Radius (outside) | FD30: 2520; FD35: 2570; FD38: 2570; FD40: 2700 |
| 16 Min. inseating aisle | FD30: 2580; FD35: 2650; FD38: 2650; FD40: 2700 |
| 17 Speed Travel (Empty load) | FD30: 20; FD35: 20; FD38: 20; FD40: 19 |
| 18 Lifting (Full load) | FD30: 510; FD35: 440; FD38: 430; FD40: 320 |
| 19 Max. Gradeability | FD30: 20; FD35: 20; FD38: 20; FD40: 20 |
| 20 Tire Front | FD30: 28×9-15-12 PR; FD35: 28×9-15-12 PR; FD38: 28×9-15-12 PR; FD40: 250-15-16 |
| 21 Tire Rear | FD30: 6.50-10-10 PR; FD35: 6.50-10-10 PR; FD38: 6.50-10-10 PR; FD40: 6.50-10-10 |
| 22 Wheelbase | FD30: 1800; FD35: 1800; FD38: 1800; FD40: 1900 |
| 23 Service weight | FD30: 4250; FD35: 4700; FD38: 4900; FD40: 5100 |
| 24 Battery Voltage/Capacity | FD30: 12/80; FD35: 12/80; FD38: 12/80; FD40: 12/80 |
| 25 Engine Model | FD30: C240; FD35: 4JG2PE-01; FD38: 4TNE98; FD40: 4TNE98 |
| 26 Engine Manufacture | FD30: ISUZU; FD35: ISUZU; FD38: YANMAR; FD40 |
| 27 Rated output/r.p.m. | FD30: 35.4/2500; FD35: 46/2450; FD38: 43/2300; FD40: 43/2300 |
| 28 Rated torque/r.p.m. | FD30: 137.7/1800; FD35: 186.3/1600-1800; FD38: 177.6-196.3/1700; FD40: 177.6-196.3/1700 |
| 29 No. of Cylinder | FD30: 4; FD35: 4; FD38: 4; FD40: 4 |
| 30 Bore×Stroke | FD30: 86 × 102; FD35: 95.4 × 107; FD38: 98 × 110; FD40: 98 × 110 |
| 31 Displacement | FD30: 2369; FD35: 3059; FD38: 3318; FD40: 3318 |
| 32 Fuel Tank Capacity | FD30: 70; FD35: 70; FD38: 70; FD40: 70 |
| 33 Transmission Type | FD30: Hydraulic; FD35: Hydraulic; FD38: Hydraulic; FD40: Hydraulic |
| 34 Stage FWD/RVS | FD30: 1/1; FD35: 1/1; FD38: 1/1; FD40: 1/1 |
| 35 Operating Pressure for Attachment | FD30: 18; FD35: 18; FD38: 18; FD40: 18 |
Gallery
All detail images published for this model.





3ton Diesel forklift 3ton Diesel forklift, part of the Diesel forklift trucks line.
Counterbalance diesel forklifts for outdoor yards, construction sites and port apron loading.
Bulk material outdoor handling
Published figures for this build: rated capacity FD30: 3000; FD35: 3500; FD38: 3800; FD40: 4000, lift height FD30: 3000; FD35: 3000; FD38: 3000; FD40: 3000, overall width FD30: 1230; FD35: 1230; FD38: 1230; FD40: 1410, turning radius FD30: 2520; FD35: 2570; FD38: 2570; FD40: 2700.
This class is specified for outdoor work and standing dust.
A diesel chassis carries pneumatic tyres and an internal combustion unit.
Diesel counterbalance trucks suit gravel, asphalt or packed earth.
A diesel chassis carries pneumatic tyres and an internal combustion unit.
Confirm the aisle width against the pallet depth before choosing a chassis. Check closed mast or chassis height against the lowest door on the route.
The specification sheet records Specification is not published in the source record; Model: FD30; FD35; FD38; FD40; Power Type: FD30: Diesel; FD35: Diesel; FD38: Diesel; FD40; Rated Capacity (kg): FD30: 3000; FD35: 3500; FD38: 3800; FD40: 4000; Load Centre (mm): FD30: 500; FD35: 500; FD38: 500; FD40: 500; Specification is not published in the source record.
The specification sheet records Lift Height (mm): FD30: 3000; FD35: 3000; FD38: 3000; FD40: 3000; Fork Size L×W×T (mm): FD30: 1070×125×45; FD35: 1070×125×50; FD38: 1070×125×50; FD40: 1070×125×50; Mast Tilt Angle F/R (Deg): FD30: 6°/12°; FD35: 6°/12°; FD38: 6°/12°; FD40: 6°/12°; Front Overhang (Wheel center to fork face) (mm): FD30: 480; FD35: 485; FD38: 485; FD40: 495; Ground Clearance (Bottom of mast) (mm): FD30: 140; FD35: 140; FD38: 140; FD40: 140; Length to face of fork (Without fork) (mm): FD30: 2780; FD35: 2835; FD38: 2835; FD40: 2890.
The specification sheet records Overall Width (mm): FD30: 1230; FD35: 1230; FD38: 1230; FD40: 1410; Mast Lowered Height (mm): FD30: 2115; FD35: 2150; FD38: 2150; FD40: 2195; Mast Extended Height (With backrest) (mm): FD30: 4175; FD35: 4175; FD38: 4175; FD40: 4180; Overhead Guard Height (mm): FD30: 2110; FD35: 2110; FD38: 2110; FD40: 2120; Turning Radius (outside) (mm): FD30: 2520; FD35: 2570; FD38: 2570; FD40: 2700; Min. inseating aisle (mm): FD30: 2580; FD35: 2650; FD38: 2650; FD40: 2700.
The specification sheet records Specification is not published in the source record; Speed Travel (Empty load) (km/h): FD30: 20; FD35: 20; FD38: 20; FD40: 19; Lifting (Full load) (mm/s): FD30: 510; FD35: 440; FD38: 430; FD40: 320; Max. Gradeability (%): FD30: 20; FD35: 20; FD38: 20; FD40: 20; Specification is not published in the source record; Tire Front (mm): FD30: 28×9-15-12 PR; FD35: 28×9-15-12 PR; FD38: 28×9-15-12 PR; FD40: 250-15-16.
The specification sheet records Tire Rear (mm): FD30: 6.50-10-10 PR; FD35: 6.50-10-10 PR; FD38: 6.50-10-10 PR; FD40: 6.50-10-10; Wheelbase (mm): FD30: 1800; FD35: 1800; FD38: 1800; FD40: 1900; Service weight (kg): FD30: 4250; FD35: 4700; FD38: 4900; FD40: 5100; Battery Voltage/Capacity (V/Ah): FD30: 12/80; FD35: 12/80; FD38: 12/80; FD40: 12/80; Specification is not published in the source record; Engine Model: FD30: C240; FD35: 4JG2PE-01; FD38: 4TNE98; FD40: 4TNE98.
The specification sheet records Engine Manufacture: FD30: ISUZU; FD35: ISUZU; FD38: YANMAR; FD40; Rated output/r.p.m. (kw): FD30: 35.4/2500; FD35: 46/2450; FD38: 43/2300; FD40: 43/2300; Rated torque/r.p.m. (N·m): FD30: 137.7/1800; FD35: 186.3/1600-1800; FD38: 177.6-196.3/1700; FD40: 177.6-196.3/1700; No. of Cylinder: FD30: 4; FD35: 4; FD38: 4; FD40: 4; Bore×Stroke (mm): FD30: 86 × 102; FD35: 95.4 × 107; FD38: 98 × 110; FD40: 98 × 110; Displacement (cc): FD30: 2369; FD35: 3059; FD38: 3318; FD40: 3318.
The specification sheet records Fuel Tank Capacity (L): FD30: 70; FD35: 70; FD38: 70; FD40: 70; Transmission Type: FD30: Hydraulic; FD35: Hydraulic; FD38: Hydraulic; FD40: Hydraulic; Stage FWD/RVS: FD30: 1/1; FD35: 1/1; FD38: 1/1; FD40: 1/1; Operating Pressure for Attachment (Mpa): FD30: 18; FD35: 18; FD38: 18; FD40: 18.
Rated figures apply at the standard load centre unless a row says otherwise.
Units are copied as published; convert them only when comparing models.
Options and attachments are listed separately from the base chassis.
Those missing values can be requested directly through the enquiry form.
Configuration follows the load, working height and site layout.
Measure the pallet footprint before the chassis is shortlisted.
Dimensions in the table come from the source record.
Note any attachment that changes the load centre or the overall width.
Match the power arrangement to the shifts and the working environment.
List the models that clear each constraint before asking for a quote.
Compare capacity first, then the lift height the job actually needs.
On the 3ton Diesel forklift, state the shifts per day so the power arrangement can be sized properly.
Check headroom under beams, pipes and door frames along the route.
On the 3ton Diesel forklift, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
Check the lowest door, beam height and aisle the truck has to pass through.
On the 3ton Diesel forklift, mark the stations where loads are picked up and dropped off each shift.
On the 3ton Diesel forklift, the operator checks load stability before each lift or move.
The working area is kept clear of loose packaging and obstacles.
On the 3ton Diesel forklift, loads are kept low while travelling between stations.
Battery or fuel levels are checked at the start of each shift.
On the 3ton Diesel forklift, this machine usually works alongside pallet trucks and stacking equipment.
The receiving side pairs it with a dock ramp or platform where needed.
On the 3ton Diesel forklift, attachments such as clamps or rotators are matched to the load shape.
The layout drawing shows where each machine sits in the operation.
On the 3ton Diesel forklift, attachments are quoted separately once the base chassis is fixed.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the 3ton Diesel forklift, capacity above the rated lift height follows the mast curve.
Dimensions are checked against the source record before quoting.
On the 3ton Diesel forklift, wear parts are supplied after delivery against the parts manual.
Mixed equipment can be listed on one enquiry.
On the 3ton Diesel forklift, the booking reference is issued with the proforma invoice.
Quotations follow the model, listed specification and destination port.
The parts manual lists the wear items and their reference views.
The operation material covers controls, checks and routine service points.
Ask for the specific certificate required for your target country.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.