3ton Diesel forklift 3ton Diesel forklift. Diesel power suits slopes and surfaces where an indoor truck would struggle.
| Parameter | Value |
|---|---|
| 1 Model | FD30; FD35; FD38; FD40 |
| 2 Power Type | FD30: Diesel; FD35: Diesel; FD38: Diesel; FD40 |
| 3 Rated Capacity | FD30: 3000; FD35: 3500; FD38: 3800; FD40: 4000 |
| 4 Load Centre | FD30: 500; FD35: 500; FD38: 500; FD40: 500 |
| 5 Lift Height | FD30: 3000; FD35: 3000; FD38: 3000; FD40: 3000 |
| 6 Fork Size L×W×T | FD30: 1070×125×45; FD35: 1070×125×50; FD38: 1070×125×50; FD40: 1070×125×50 |
| 7 Mast Tilt Angle F/R | FD30: 6°/12°; FD35: 6°/12°; FD38: 6°/12°; FD40: 6°/12° |
| 8 Front Overhang (Wheel center to fork face) | FD30: 480; FD35: 485; FD38: 485; FD40: 495 |
| 9 Ground Clearance (Bottom of mast) | FD30: 140; FD35: 140; FD38: 140; FD40: 140 |
| 10 Length to face of fork (Without fork) | FD30: 2780; FD35: 2835; FD38: 2835; FD40: 2890 |
| 11 Overall Width | FD30: 1230; FD35: 1230; FD38: 1230; FD40: 1410 |
| 12 Mast Lowered Height | FD30: 2115; FD35: 2150; FD38: 2150; FD40: 2195 |
| 13 Mast Extended Height (With backrest) | FD30: 4175; FD35: 4175; FD38: 4175; FD40: 4180 |
| 14 Overhead Guard Height | FD30: 2110; FD35: 2110; FD38: 2110; FD40: 2120 |
| 15 Turning Radius (outside) | FD30: 2520; FD35: 2570; FD38: 2570; FD40: 2700 |
| 16 Min. inseating aisle | FD30: 2580; FD35: 2650; FD38: 2650; FD40: 2700 |
| 17 Speed Travel (Empty load) | FD30: 20; FD35: 20; FD38: 20; FD40: 19 |
| 18 Lifting (Full load) | FD30: 510; FD35: 440; FD38: 430; FD40: 320 |
| 19 Max. Gradeability | FD30: 20; FD35: 20; FD38: 20; FD40: 20 |
| 20 Tire Front | FD30: 28×9-15-12 PR; FD35: 28×9-15-12 PR; FD38: 28×9-15-12 PR; FD40: 250-15-16 |
| 21 Tire Rear | FD30: 6.50-10-10 PR; FD35: 6.50-10-10 PR; FD38: 6.50-10-10 PR; FD40: 6.50-10-10 |
| 22 Wheelbase | FD30: 1800; FD35: 1800; FD38: 1800; FD40: 1900 |
| 23 Service weight | FD30: 4250; FD35: 4700; FD38: 4900; FD40: 5100 |
| 24 Battery Voltage/Capacity | FD30: 12/80; FD35: 12/80; FD38: 12/80; FD40: 12/80 |
| 25 Engine Model | FD30: C240; FD35: 4JG2PE-01; FD38: 4TNE98; FD40: 4TNE98 |
| 26 Engine Manufacture | FD30: ISUZU; FD35: ISUZU; FD38: YANMAR; FD40 |
| 27 Rated output/r.p.m. | FD30: 35.4/2500; FD35: 46/2450; FD38: 43/2300; FD40: 43/2300 |
| 28 Rated torque/r.p.m. | FD30: 137.7/1800; FD35: 186.3/1600-1800; FD38: 177.6-196.3/1700; FD40: 177.6-196.3/1700 |
| 29 No. of Cylinder | FD30: 4; FD35: 4; FD38: 4; FD40: 4 |
| 30 Bore×Stroke | FD30: 86 × 102; FD35: 95.4 × 107; FD38: 98 × 110; FD40: 98 × 110 |
| 31 Displacement | FD30: 2369; FD35: 3059; FD38: 3318; FD40: 3318 |
| 32 Fuel Tank Capacity | FD30: 70; FD35: 70; FD38: 70; FD40: 70 |
| 33 Transmission Type | FD30: Hydraulic; FD35: Hydraulic; FD38: Hydraulic; FD40: Hydraulic |
| 34 Stage FWD/RVS | FD30: 1/1; FD35: 1/1; FD38: 1/1; FD40: 1/1 |
| 35 Operating Pressure for Attachment | FD30: 18; FD35: 18; FD38: 18; FD40: 18 |
Datasheet generated from the source record. Values are confirmed line by line on the signed quotation; figures not published in the source record are shown as an em dash.
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.