Wire mesh container with wheels Wire mesh container with wheels. The storage layout sets the aisle width the truck must enter.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| ITEM | MODEL Size(mm) Mesh size(mm) Wire dia. (mm) N.W(kg) Capacity (kg) |
| A series | A-1 800*600*640 50*50 6 29 800 |
| SA-1 | 5.8 27.7 600 |
| A5.3 | 5.5 23.2 400 |
| A4.8 | 5 20.8 300 |
| B series | B-1 1000*800*840 50*50 6 44.6 1000 |
| SB-1 | 5.8 42.8 800 |
| B5.3 | 5.5 35.6 600 |
| B4.8 | 5 31 500 |
| C series | C-1 1200*1000*890 50*50 6 60.8 1500 |
| SC-1 | 5.8 55.6 1200 |
| C-2 | 50*100 6 53.4 1000 |
| SC-2 | 5.8 48.4 800 |
Gallery
All detail images published for this model.







Wire mesh container with wheels Wire mesh container with wheels, part of the Storage systems line.
Racking, wire mesh containers, pallets and decking for pallet and bulk-goods storage.
Returnable goods storage
Racking and systems organise pallet and carton positions inside a warehouse.
Load beams are spaced to the pallet depth and stacking height.
Access floor space and column lines are checked against the design.
Load beams are spaced to the pallet depth and stacking height.
Check closed mast or chassis height against the lowest door on the route. Confirm the charger voltage or fuel type for your destination country.
The specification sheet records ITEM: MODEL Size(mm) Mesh size(mm) Wire dia. (mm) N.W(kg) Capacity (kg); A series: A-1 800*600*640 50*50 6 29 800; SA-1: 5.8 27.7 600; A5.3: 5.5 23.2 400; A4.8: 5 20.8 300; B series: B-1 1000*800*840 50*50 6 44.6 1000.
The specification sheet records SB-1: 5.8 42.8 800; B5.3: 5.5 35.6 600; B4.8: 5 31 500; C series: C-1 1200*1000*890 50*50 6 60.8 1500; SC-1: 5.8 55.6 1200; C-2: 50*100 6 53.4 1000.
The specification sheet records SC-2: 5.8 48.4 800.
An em dash marks a value the source record did not publish.
Options and attachments are listed separately from the base chassis.
Each row in the table keeps the label and value from the source record.
Units are copied as published; convert them only when comparing models.
Configuration follows the load, working height and site layout.
Measure the pallet footprint before the chassis is shortlisted.
Send pallet size, door height and aisle width with the enquiry.
Check the chassis width against the aisle and the container door.
List the models that clear each constraint before asking for a quote.
Compare capacity first, then the lift height the job actually needs.
Note any attachment that changes the load centre or the overall width.
On the Wire mesh container with wheels, state the shifts per day so the power arrangement can be sized properly.
Measure the pallet footprint and the heaviest single load before comparing models.
On the Wire mesh container with wheels, list the attachments required, such as clamps, sideshift or rotator.
Check the lowest door, beam height and aisle the truck has to pass through.
On the Wire mesh container with wheels, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the Wire mesh container with wheels, battery or fuel levels are checked at the start of each shift.
The operator follows the rated capacity marked on the chassis.
On the Wire mesh container with wheels, attachments are secured before the machine leaves the station.
The operator checks load stability before each lift or move.
On the Wire mesh container with wheels, a mixed enquiry can list this model together with other families.
The layout drawing shows where each machine sits in the operation.
On the Wire mesh container with wheels, related models in the same group are listed on the family page.
Attachments such as clamps or rotators are matched to the load shape.
On the Wire mesh container with wheels, capacity above the rated lift height follows the mast curve.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the Wire mesh container with wheels, attachments are quoted separately once the base chassis is fixed.
The specification sheet is the binding reference for listed values.
On the Wire mesh container with wheels, quote the serial number and component name when ordering spares.
Documents issued for an order are listed in the quotation.
On the Wire mesh container with wheels, packing follows sea-freight practice for the chosen chassis.
Wear parts are supplied after delivery against the parts manual.
The serial number identifies the build when parts are ordered later.
Ask for the specific certificate required for your target country.
The parts manual lists the wear items and their reference views.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.