Mid duty racking Racking System. Systems are drawn to building dimensions before any truck is ordered.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Rack Size | Length / From 1800mm to 2000mm |
| Depth | From 800mm to 1200mm |
| Height | From 1800mm to 4000mm |
| Upright frame Size | 65*65mm / thickness:1.5~2.0mm |
| Beam Size | 80*40/105*40/125*50mm thickness: 1.5mm. 2mm optional |
Gallery
All detail images published for this model.


Mid duty racking Racking System, part of the Storage systems line.
Racking, wire mesh containers, pallets and decking for pallet and bulk-goods storage.
Racking organisation
Access floor space and column lines are checked against the design.
Beam, shelving and cage layouts follow pallet size and aisle height.
Systems are drawn to building dimensions before any truck is ordered.
Load beams are spaced to the pallet depth and stacking height.
State any attachment required alongside the base model. Match the tyre type to the floor surface rather than the price list.
The specification sheet records Rack Size: Length / From 1800mm to 2000mm; Depth: From 800mm to 1200mm; Height: From 1800mm to 4000mm; Upright frame Size: 65*65mm / thickness:1.5~2.0mm; Beam Size: 80*40/105*40/125*50mm thickness: 1.5mm. 2mm optional.
Remaining parameters are listed row by row in the specification table.
Rated figures apply at the standard load centre unless a row says otherwise.
Those missing values can be requested directly through the enquiry form.
Units are copied as published; convert them only when comparing models.
An em dash marks a value the source record did not publish.
Configuration follows the load, working height and site layout.
Send pallet size, door height and aisle width with the enquiry.
The enquiry should list any attachment the job requires.
List the models that clear each constraint before asking for a quote.
Check the chassis width against the aisle and the container door.
Compare capacity first, then the lift height the job actually needs.
Compare the lowered height against the lowest door on the route.
On the Mid duty racking, state the shifts per day so the power arrangement can be sized properly.
Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the Mid duty racking, list the attachments required, such as clamps, sideshift or rotator.
Note any slope, threshold or step along the working route.
On the Mid duty racking, measure the pallet footprint and the heaviest single load before comparing models.
On the Mid duty racking, routine checks cover tyres, brakes, controls and visible leaks.
Loads are kept low while travelling between stations.
On the Mid duty racking, attachments are secured before the machine leaves the station.
The operator checks load stability before each lift or move.
On the Mid duty racking, the receiving side pairs it with a dock ramp or platform where needed.
Related models in the same group are listed on the family page.
On the Mid duty racking, this machine usually works alongside pallet trucks and stacking equipment.
The layout drawing shows where each machine sits in the operation.
On the Mid duty racking, any option not listed should be confirmed in writing before order.
Capacity above the rated lift height follows the mast curve.
On the Mid duty racking, dimensions are checked against the source record before quoting.
Tyre choice should match the floor rather than the price list.
On the Mid duty racking, the enquiry should include the quantity and destination port.
Documents issued for an order are listed in the quotation.
On the Mid duty racking, loading is recorded before the container is sealed.
Wear parts are supplied after delivery against the parts manual.
The parts manual lists the wear items and their reference views.
Test and conformity documents follow the model and destination market.
Ask for the specific certificate required for your target country.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.