slotted angle bar Slotted Angle Bar. Load beams are spaced to the pallet depth and stacking height.

Specification
The source record did not publish a parameter table for this model. The listed figures below are limited to what the record confirms; request the missing parameters through the enquiry form.
Gallery
All detail images published for this model.


slotted angle bar Slotted Angle Bar, part of the Storage systems line.
Racking, wire mesh containers, pallets and decking for pallet and bulk-goods storage.
Returnable goods storage
The storage layout sets the aisle width the truck must enter.
The storage layout sets the aisle width the truck must enter.
Systems are drawn to building dimensions before any truck is ordered.
The storage layout sets the aisle width the truck must enter.
Describe the shifts per day when the power arrangement is selected. Check closed mast or chassis height against the lowest door on the route.
The published parameters for this build are listed in the specification table.
Items the source record did not publish are shown as an em dash in the table.
Those missing items can be asked for directly through the enquiry form.
Units are copied as published; convert them only when comparing models.
An em dash marks a value the source record did not publish.
Options and attachments are listed separately from the base chassis.
Configuration follows the load, working height and site layout.
Dimensions in the table come from the source record.
Measure the pallet footprint before the chassis is shortlisted.
Compare the lowered height against the lowest door on the route.
Match the power arrangement to the shifts and the working environment.
Check the machine weight against floor loading where the site is raised.
Note any attachment that changes the load centre or the overall width.
On the slotted angle bar, keep the charging or refuelling position clear of the main traffic aisle.
Note any slope, threshold or step along the working route.
On the slotted angle bar, list the attachments required, such as clamps, sideshift or rotator.
Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the slotted angle bar, send photographs of the racking and the existing working area when possible.
On the slotted angle bar, unusual noise or movement is reported before further use.
Loads are kept low while travelling between stations.
On the slotted angle bar, routine checks cover tyres, brakes, controls and visible leaks.
The working area is kept clear of loose packaging and obstacles.
On the slotted angle bar, the layout drawing shows where each machine sits in the operation.
The receiving side pairs it with a dock ramp or platform where needed.
On the slotted angle bar, attachments such as clamps or rotators are matched to the load shape.
A mixed enquiry can list this model together with other families.
On the slotted angle bar, the specification sheet is the binding reference for listed values.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the slotted angle bar, dimensions are checked against the source record before quoting.
Any option not listed should be confirmed in writing before order.
On the slotted angle bar, wear parts are supplied after delivery against the parts manual.
The booking reference is issued with the proforma invoice.
On the slotted angle bar, mixed equipment can be listed on one enquiry.
The enquiry should include the quantity and destination port.
The parts manual lists the wear items and their reference views.
The operation material covers controls, checks and routine service points.
The serial number identifies the build when parts are ordered later.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.