Heavy duty rack Racking System. The storage layout sets the aisle width the truck must enter.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Rack Size | Length / From 1800mm to 3900mm |
| Depth | From 800mm to 1500mm |
| Height | From 1800mm to 12000mm |
| Upright frame Size | 65*65mm / 72*90mm /90*120mm thickness:1.5~2.0~2.3~3mm |
| Beam Size | 80*40/105*40/125*50mm 150*50/160*50mm thickness: 1.5mm. 2mm optional |
Gallery
All detail images published for this model.

Heavy duty rack Racking System, part of the Storage systems line.
Racking, wire mesh containers, pallets and decking for pallet and bulk-goods storage.
Warehouse stocking
The storage layout sets the aisle width the truck must enter.
Beam, shelving and cage layouts follow pallet size and aisle height.
The storage layout sets the aisle width the truck must enter.
Load beams are spaced to the pallet depth and stacking height.
Note cold store, outdoor gradient or container entry as a constraint. Describe the shifts per day when the power arrangement is selected.
The specification sheet records Rack Size: Length / From 1800mm to 3900mm; Depth: From 800mm to 1500mm; Height: From 1800mm to 12000mm; Upright frame Size: 65*65mm / 72*90mm /90*120mm thickness:1.5~2.0~2.3~3mm; Beam Size: 80*40/105*40/125*50mm 150*50/160*50mm thickness: 1.5mm. 2mm optional.
Remaining parameters are listed row by row in the specification table.
Units are copied as published; convert them only when comparing models.
An em dash marks a value the source record did not publish.
Rated figures apply at the standard load centre unless a row says otherwise.
Options and attachments are listed separately from the base chassis.
Configuration follows the load, working height and site layout.
The enquiry should list any attachment the job requires.
The listed figures follow the record; options are confirmed on the quotation.
Compare the lowered height against the lowest door on the route.
Review the tyre type against the surface the machine will run on.
Check the chassis width against the aisle and the container door.
Compare capacity first, then the lift height the job actually needs.
On the Heavy duty rack, send photographs of the racking and the existing working area when possible.
Mark the stations where loads are picked up and dropped off each shift.
On the Heavy duty rack, check the lowest door, beam height and aisle the truck has to pass through.
List the attachments required, such as clamps, sideshift or rotator.
On the Heavy duty rack, state the shifts per day so the power arrangement can be sized properly.
On the Heavy duty rack, loads are kept low while travelling between stations.
Routine checks cover tyres, brakes, controls and visible leaks.
On the Heavy duty rack, the operator follows the rated capacity marked on the chassis.
The operator checks load stability before each lift or move.
On the Heavy duty rack, related models in the same group are listed on the family page.
This machine usually works alongside pallet trucks and stacking equipment.
On the Heavy duty rack, spare parts for wear items follow the parts manual after delivery.
Attachments such as clamps or rotators are matched to the load shape.
On the Heavy duty rack, site conditions such as gradient, dust and moisture belong in the enquiry.
Capacity above the rated lift height follows the mast curve.
On the Heavy duty rack, the specification sheet is the binding reference for listed values.
Dimensions are checked against the source record before quoting.
On the Heavy duty rack, mixed equipment can be listed on one enquiry.
Wear parts are supplied after delivery against the parts manual.
On the Heavy duty rack, the operation and parts material travel with the machine.
Loading is recorded before the container is sealed.
The serial number identifies the build when parts are ordered later.
The operation material covers controls, checks and routine service points.
The parts manual lists the wear items and their reference views.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.