wire mesh container Wire mesh container. Access floor space and column lines are checked against the design.

Specification
The source record did not publish a parameter table for this model. The listed figures below are limited to what the record confirms; request the missing parameters through the enquiry form.
Gallery
All detail images published for this model.






wire mesh container Wire mesh container, part of the Storage systems line.
Racking, wire mesh containers, pallets and decking for pallet and bulk-goods storage.
Pallet and bulk storage
Racking and systems organise pallet and carton positions inside a warehouse.
Beam, shelving and cage layouts follow pallet size and aisle height.
Beam, shelving and cage layouts follow pallet size and aisle height.
Racking and systems organise pallet and carton positions inside a warehouse.
Confirm the aisle width against the pallet depth before choosing a chassis. Compare rated capacity against the heaviest single load you move.
The published parameters for this build are listed in the specification table.
Items the source record did not publish are shown as an em dash in the table.
Those missing items can be asked for directly through the enquiry form.
Options and attachments are listed separately from the base chassis.
Each row in the table keeps the label and value from the source record.
Units are copied as published; convert them only when comparing models.
Configuration follows the load, working height and site layout.
Measure the pallet footprint before the chassis is shortlisted.
Dimensions in the table come from the source record.
Match the power arrangement to the shifts and the working environment.
Compare the lowered height against the lowest door on the route.
Review the tyre type against the surface the machine will run on.
Compare capacity first, then the lift height the job actually needs.
On the wire mesh container, measure the pallet footprint and the heaviest single load before comparing models.
Check the lowest door, beam height and aisle the truck has to pass through.
On the wire mesh container, list the attachments required, such as clamps, sideshift or rotator.
State the shifts per day so the power arrangement can be sized properly.
On the wire mesh container, mark the stations where loads are picked up and dropped off each shift.
On the wire mesh container, attachments are secured before the machine leaves the station.
Routine checks cover tyres, brakes, controls and visible leaks.
On the wire mesh container, loads are kept low while travelling between stations.
The operator checks load stability before each lift or move.
On the wire mesh container, related models in the same group are listed on the family page.
The receiving side pairs it with a dock ramp or platform where needed.
On the wire mesh container, the layout drawing shows where each machine sits in the operation.
Storage cages and racking organise the loads it moves between stations.
On the wire mesh container, the signed datasheet issued with the quotation is the binding version.
Any option not listed should be confirmed in writing before order.
On the wire mesh container, the specification sheet is the binding reference for listed values.
Attachments are quoted separately once the base chassis is fixed.
On the wire mesh container, loading is recorded before the container is sealed.
Packing follows sea-freight practice for the chosen chassis.
On the wire mesh container, documents issued for an order are listed in the quotation.
Quotations follow the model, listed specification and destination port.
The operation material covers controls, checks and routine service points.
Test and conformity documents follow the model and destination market.
Ask for the specific certificate required for your target country.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.