Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

Warehouse racking and storage basics

Storage is sized from the pallet, the level and the truck — in that order.

Count pallets, then levels

The storage requirement is the number of pallet positions, which is pallets × levels. A 1,000-pallet operation at four beam levels needs roughly 250 positions per level plus picking faces.

Add growth and reserve stock before choosing bay widths: bay width is set by pallet width plus clearance, and that is a fixed decision once the rack is fabricated.

Load per level, not per bay

Beam capacity is stated per pair of beams, assuming a uniformly distributed load. A heavy pallet placed in the middle of a beam pair is a different case from two light pallets spread along it.

Give the heaviest pallet weight and its footprint; the beam section and the upright load follow from that.

Rack type follows the picking pattern

  • Selective pallet racking — direct access to every pallet, the default for mixed SKUs.
  • Drive-in / drive-through — dense storage of few SKUs, high utilisation, lower access.
  • Push-back — last-in first-out with carts, good for medium SKU counts.
  • Shelving and mesh containers — small parts, returns, order-picking faces.

Aisle width and truck

Aisle width is a rack decision, because it determines which truck can work the rack. A counterbalance truck needs a wider aisle than a reach truck, and a very narrow aisle layout needs rail guidance.

Set the aisle from the truck you will actually buy, or buy the truck that fits the aisle you can afford to lose.

Safety items buyers forget

  • Upright protectors and guide rails at every corner exposed to truck traffic
  • Beam locks and a documented load notice per bay
  • Floor loading — point loads at uprights, not average load
  • Sprinkler clearance if the building is protected

Models

Models in this class

Published figures for the first 8 models of this family; open a model page for the full specification.

Warehouse racking and storage basics model comparison

ModelCapacityLiftPowerTypical use
wire———Pallet and bulk storage
slotted———Returnable goods storage
SRWL***———Returnable goods storage
Heavy———Warehouse stocking
Mid———Racking organisation
DM———Pallet and bulk storage
PM———Racking organisation
TZ———Carton shelving storage
All models in this family →

Questions

Questions buyers ask

How many pallets fit in a 40-foot container of racking?+

It depends on upright height and beam length, which is why the rack is quoted as a layout rather than a container count. Send the pallet size and level count for a layout.

Can mesh containers stack with pallet racking?+

Yes on suitable beam levels, and they are often used for returns and small parts inside the same building.

What is the minimum order quantity?+

One set; storage items can share a container with handling equipment.

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.