TZ Plastic Pallet. Access floor space and column lines are checked against the design.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| L | W / H |
| TZ1411-Z | 1400 / 1100 / 150 / 4000 / 1000 |
| TZ1311-Z | 1300 / 1100 / 150 / 4000 / 1000 |
| TZ1210-D | 1200 / 1000 / 150 / 4000 |
| TZ1111-D | 1100 / 150 / 4000 / 1000 |
| L | W / H |
| TZ1212-X | 1200 / 150 / 4000 / 1000 |
| TZ1210-L | 1200 / 150 / 3000 / 800 |
| TZ1111-L | 1100 / 150 / 3000 / 800 |
| TZ1010-X | 1000 / 150 / 3000 / 800 |
| L | W / H |
| TZ1210-R1 | 1200 / 1000 / 125 / 3000 / 700 |
| TZ1111-R1 | 1100 / 125 / 3000 / 700 |
| L | W / H |
| TZ1211-L | 1200 / 1100 / 150 / 4000 / 1000 |
| TZ1210-X | 1200 / 1000 / 150 / 4000 |
| TZ1208-X | 1200 / 800 / 150 / 3000 |
| L | W / H |
| TZ1210-A | 1200 / 1000 / 150 / 5000 |
| TZ1111-A | 1100 / 150 / 5000 / 1000 |
| L | W / H |
| PMTZ1210-X | 1200 / 1000 / 170 / 5000 / 1500 |
| PMTZ1210-A | 1200 / 1000 / 150 / 4000 |
| PMTZ1111-X | 1100 / 150 / 4000 / 1000 |
| L | W / H |
| TZ1111-X | 1100 / 150 / 4000 / 1000 |
Gallery
All detail images published for this model.










TZ Plastic Pallet, part of the Storage systems line.
Racking, wire mesh containers, pallets and decking for pallet and bulk-goods storage.
Carton shelving storage
The storage layout sets the aisle width the truck must enter.
The storage layout sets the aisle width the truck must enter.
Systems are drawn to building dimensions before any truck is ordered.
Beam, shelving and cage layouts follow pallet size and aisle height.
Note cold store, outdoor gradient or container entry as a constraint. Check closed mast or chassis height against the lowest door on the route.
The specification sheet records L: W / H; TZ1411-Z: 1400 / 1100 / 150 / 4000 / 1000; TZ1311-Z: 1300 / 1100 / 150 / 4000 / 1000; TZ1210-D: 1200 / 1000 / 150 / 4000; TZ1111-D: 1100 / 150 / 4000 / 1000; L: W / H.
The specification sheet records TZ1212-X: 1200 / 150 / 4000 / 1000; TZ1210-L: 1200 / 150 / 3000 / 800; TZ1111-L: 1100 / 150 / 3000 / 800; TZ1010-X: 1000 / 150 / 3000 / 800; L: W / H; TZ1210-R1: 1200 / 1000 / 125 / 3000 / 700.
The specification sheet records TZ1111-R1: 1100 / 125 / 3000 / 700; L: W / H; TZ1211-L: 1200 / 1100 / 150 / 4000 / 1000; TZ1210-X: 1200 / 1000 / 150 / 4000; TZ1208-X: 1200 / 800 / 150 / 3000; L: W / H.
The specification sheet records TZ1210-A: 1200 / 1000 / 150 / 5000; TZ1111-A: 1100 / 150 / 5000 / 1000; L: W / H; PMTZ1210-X: 1200 / 1000 / 170 / 5000 / 1500; PMTZ1210-A: 1200 / 1000 / 150 / 4000; PMTZ1111-X: 1100 / 150 / 4000 / 1000.
The specification sheet records L: W / H; TZ1111-X: 1100 / 150 / 4000 / 1000.
Each row in the table keeps the label and value from the source record.
Those missing values can be requested directly through the enquiry form.
Rated figures apply at the standard load centre unless a row says otherwise.
An em dash marks a value the source record did not publish.
Configuration follows the load, working height and site layout.
The enquiry should list any attachment the job requires.
Measure the pallet footprint before the chassis is shortlisted.
Match the power arrangement to the shifts and the working environment.
Note any attachment that changes the load centre or the overall width.
Check the chassis width against the aisle and the container door.
List the models that clear each constraint before asking for a quote.
On the TZ, state the shifts per day so the power arrangement can be sized properly.
Measure the pallet footprint and the heaviest single load before comparing models.
On the TZ, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
Check the lowest door, beam height and aisle the truck has to pass through.
On the TZ, send photographs of the racking and the existing working area when possible.
On the TZ, the working area is kept clear of loose packaging and obstacles.
The operator checks load stability before each lift or move.
On the TZ, the operator follows the rated capacity marked on the chassis.
Unusual noise or movement is reported before further use.
On the TZ, spare parts for wear items follow the parts manual after delivery.
Storage cages and racking organise the loads it moves between stations.
On the TZ, attachments such as clamps or rotators are matched to the load shape.
The receiving side pairs it with a dock ramp or platform where needed.
On the TZ, tyre choice should match the floor rather than the price list.
The signed datasheet issued with the quotation is the binding version.
On the TZ, dimensions are checked against the source record before quoting.
Any option not listed should be confirmed in writing before order.
On the TZ, the booking reference is issued with the proforma invoice.
Quotations follow the model, listed specification and destination port.
On the TZ, the enquiry should include the quantity and destination port.
Quote the serial number and component name when ordering spares.
Ask for the specific certificate required for your target country.
The operation material covers controls, checks and routine service points.
The serial number identifies the build when parts are ordered later.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.