Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

DM — storage system

DM Plastic Pallet. Racking and systems organise pallet and carton positions inside a warehouse.

DM storage system — product photo 1 of 12

Ordering facts for the DM

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

DM specification

Values are copied from the source record in their original order and units.

DM specification table
ParameterValue
LW / H
DM1210-X1200 / 1000 / 145 / 2000 / 700
DM1209-X1200 / 900 / 145 / 2000 / 600
DM1208-X1200 / 800 / 145 / 1500 / 600
DM1110-X1100 / 1000 / 145 / 2000 / 700
DM1109-X1100 / 900 / 145 / 1500 / 600
DM1108-X1100 / 800 / 145 / 1500 / 600
DM1010-X1000 / 145 / 1500 / 600
DM1008-X1000 / 800 / 145 / 1500 / 500
LW / H
DK1210-X1200 / 1000 / 145 / 2000 / 700
LW / H
DM1111-X1100 / 145 / 2000 / 700
LW / H
DW1210-X1200 / 1000 / 140 / 3000 / 800
DW1111-X1100 / 140 / 3000 / 800
DW1010-X1000 / 140 / 2000 / 600
LW / H
DM1210-A1200 / 1000 / 150 / 3000
DM1111-A1100 / 150 / 3000 / 1000
DM1208-A1200 / 800 / 150 / 3000 / 1000
DM1008-A1000 / 800 / 150 / 3000
LW / H
DW1210-A1200 / 1000 / 140 / 3000
DW1210-A11200 / 1000 / 78 / 3000
LW / H
DW1515-L1500 / 140 / 4000 / 1000
DW1411-L1400 / 1100 / 140 / 4000 / 1000
DW1212-L1200 / 140 / 4000 / 1000
DW1210-R1200 / 1000 / 125 / 3000
DW1210-R11200 / 1000 / 75 / 4000
DW1111-X1100 / 140 / 3000 / 1000
DW1111-X 11100 / 50 / 4000
LW / H
DW1414-Z1400 / 140 / 4000 / 1000
DW1413-Z1400 / 1300 / 140 / 4000 / 1000
DW1412-Z1400 / 1200 / 140 / 4000 / 1000
DW1311-Z1300 / 1100 / 140 / 4000 / 1000
DW1109-Z1100 / 900 / 140 / 4000 / 1000
Request price Datasheet (print / save as PDF) Ask about configuration

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

DM Plastic Pallet, part of the Storage systems line.

Racking, wire mesh containers, pallets and decking for pallet and bulk-goods storage.

Pallet and bulk storage

The storage layout sets the aisle width the truck must enter.

Beam, shelving and cage layouts follow pallet size and aisle height.

The storage layout sets the aisle width the truck must enter.

The storage layout sets the aisle width the truck must enter.

Note cold store, outdoor gradient or container entry as a constraint. Compare rated capacity against the heaviest single load you move.

Specification walk-through

The specification sheet records L: W / H; DM1210-X: 1200 / 1000 / 145 / 2000 / 700; DM1209-X: 1200 / 900 / 145 / 2000 / 600; DM1208-X: 1200 / 800 / 145 / 1500 / 600; DM1110-X: 1100 / 1000 / 145 / 2000 / 700; DM1109-X: 1100 / 900 / 145 / 1500 / 600.

The specification sheet records DM1108-X: 1100 / 800 / 145 / 1500 / 600; DM1010-X: 1000 / 145 / 1500 / 600; DM1008-X: 1000 / 800 / 145 / 1500 / 500; L: W / H; DK1210-X: 1200 / 1000 / 145 / 2000 / 700; L: W / H.

The specification sheet records DM1111-X: 1100 / 145 / 2000 / 700; L: W / H; DW1210-X: 1200 / 1000 / 140 / 3000 / 800; DW1111-X: 1100 / 140 / 3000 / 800; DW1010-X: 1000 / 140 / 2000 / 600; L: W / H.

The specification sheet records DM1210-A: 1200 / 1000 / 150 / 3000; DM1111-A: 1100 / 150 / 3000 / 1000; DM1208-A: 1200 / 800 / 150 / 3000 / 1000; DM1008-A: 1000 / 800 / 150 / 3000; L: W / H; DW1210-A: 1200 / 1000 / 140 / 3000.

The specification sheet records DW1210-A1: 1200 / 1000 / 78 / 3000; L: W / H; DW1515-L: 1500 / 140 / 4000 / 1000; DW1411-L: 1400 / 1100 / 140 / 4000 / 1000; DW1212-L: 1200 / 140 / 4000 / 1000; DW1210-R: 1200 / 1000 / 125 / 3000.

The specification sheet records DW1210-R1: 1200 / 1000 / 75 / 4000; DW1111-X: 1100 / 140 / 3000 / 1000; DW1111-X 1: 1100 / 50 / 4000; L: W / H; DW1414-Z: 1400 / 140 / 4000 / 1000; DW1413-Z: 1400 / 1300 / 140 / 4000 / 1000.

The specification sheet records DW1412-Z: 1400 / 1200 / 140 / 4000 / 1000; DW1311-Z: 1300 / 1100 / 140 / 4000 / 1000; DW1109-Z: 1100 / 900 / 140 / 4000 / 1000.

Units are copied as published; convert them only when comparing models.

Those missing values can be requested directly through the enquiry form.

Options and attachments are listed separately from the base chassis.

Each row in the table keeps the label and value from the source record.

How to specify the right build

Configuration follows the load, working height and site layout.

The enquiry should list any attachment the job requires.

Send pallet size, door height and aisle width with the enquiry.

Compare the lowered height against the lowest door on the route.

List the models that clear each constraint before asking for a quote.

Note any attachment that changes the load centre or the overall width.

Compare capacity first, then the lift height the job actually needs.

  • List attachments such as clamps, sideshift or rotator separately.
  • Send those figures with the model code; the reply confirms whether the chassis suits.
  • List the load per move, lift height and floor surface before comparing models.

Site preparation and operating notes

On the DM, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.

Mark the stations where loads are picked up and dropped off each shift.

On the DM, send photographs of the racking and the existing working area when possible.

State the shifts per day so the power arrangement can be sized properly.

On the DM, check the lowest door, beam height and aisle the truck has to pass through.

Operation and routine checks

On the DM, the operator follows the rated capacity marked on the chassis.

The operator checks load stability before each lift or move.

On the DM, the working area is kept clear of loose packaging and obstacles.

Battery or fuel levels are checked at the start of each shift.

How this model fits the operation

On the DM, storage cages and racking organise the loads it moves between stations.

This machine usually works alongside pallet trucks and stacking equipment.

On the DM, attachments such as clamps or rotators are matched to the load shape.

The layout drawing shows where each machine sits in the operation.

Working conditions and honest limits

On the DM, the signed datasheet issued with the quotation is the binding version.

Dimensions are checked against the source record before quoting.

On the DM, tyre choice should match the floor rather than the price list.

Any option not listed should be confirmed in writing before order.

Delivery, documents and support

On the DM, the enquiry should include the quantity and destination port.

Packing follows sea-freight practice for the chosen chassis.

On the DM, the booking reference is issued with the proforma invoice.

Mixed equipment can be listed on one enquiry.

The operation material covers controls, checks and routine service points.

Test and conformity documents follow the model and destination market.

The serial number identifies the build when parts are ordered later.

Before you order

  • The rated load applies at the standard load centre; carrying the load farther forward reduces the figure marked on the chassis plate.
  • Dimensions in the specification come from the source record — check them against the container door, the lowest door on the route and the aisle before ordering.
  • Any clamp, sideshift or rotator changes the load centre and must be listed alongside the base model.
  • Documents issued with the order: ISO 9001, ISO 14001 and ISO 18001 factory certificates, plus CE or GS where the model carries it, and the serial list for the shipment.
  • Spare parts follow the parts manual supplied with the machine; quote the serial number and component name when ordering wear parts.

Questions

Questions buyers ask before ordering

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Which ports can the machine ship from?+

Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Storage systems related models

ModelCapacityLiftPowerTypical use
wire———Pallet and bulk storage
slotted———Returnable goods storage
SRWL***———Returnable goods storage
Heavy———Warehouse stocking
Mid———Racking organisation

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.