SRTE500 Motorcycle Lift, rated capacity 500 kg. The enquiry should describe the station the equipment works at.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | SRTE500 |
| Max.capacity | 500 kg |
| Max.platform height | 800 mm |
| Min.platform height | 170 mm |
| Platform size | 2200x700 mm |
| Base Frame Size | 680x1615 mm |
| Lifting Time | 8-15 second |
| Power Pack | 380V/50HZ,AC.1.1KW |
| Net Weight | 240 kg |
Gallery
All detail images published for this model.


SRTE500 Motorcycle Lift, part of the Special-purpose handling equipment line.
Hand trucks and trolleys, stair-climbing carts, paper-roll and coil clamps, forklift attachments, jacks and other auxiliary tools that do not fit the powered-vehicle families.
General handling
Published figures for this build: rated capacity 500 kg.
The enquiry should describe the station the equipment works at.
The machine is specified against the load, floor and working height.
The enquiry should describe the station the equipment works at.
This item belongs to the broader SUNRISE material handling catalogue.
Check closed mast or chassis height against the lowest door on the route. Confirm the charger voltage or fuel type for your destination country.
The specification sheet records Model: SRTE500; Max.capacity (kg): 500 kg; Max.platform height (mm): 800 mm; Min.platform height (mm): 170 mm; Platform size (mm): 2200x700 mm; Base Frame Size (mm): 680x1615 mm.
The specification sheet records Lifting Time: 8-15 second; Power Pack: 380V/50HZ,AC.1.1KW; Net Weight (kg): 240 kg.
Rated figures apply at the standard load centre unless a row says otherwise.
An em dash marks a value the source record did not publish.
Options and attachments are listed separately from the base chassis.
Those missing values can be requested directly through the enquiry form.
Configuration follows the load, working height and site layout.
Dimensions in the table come from the source record.
Measure the pallet footprint before the chassis is shortlisted.
Check the chassis width against the aisle and the container door.
Compare capacity first, then the lift height the job actually needs.
Compare the lowered height against the lowest door on the route.
Match the power arrangement to the shifts and the working environment.
On the SRTE500, mark the stations where loads are picked up and dropped off each shift.
Keep the charging or refuelling position clear of the main traffic aisle.
On the SRTE500, list the attachments required, such as clamps, sideshift or rotator.
State the shifts per day so the power arrangement can be sized properly.
On the SRTE500, check headroom under beams, pipes and door frames along the route.
On the SRTE500, battery or fuel levels are checked at the start of each shift.
The working area is kept clear of loose packaging and obstacles.
On the SRTE500, attachments are secured before the machine leaves the station.
The operator checks load stability before each lift or move.
On the SRTE500, spare parts for wear items follow the parts manual after delivery.
The receiving side pairs it with a dock ramp or platform where needed.
On the SRTE500, related models in the same group are listed on the family page.
Attachments such as clamps or rotators are matched to the load shape.
On the SRTE500, capacity above the rated lift height follows the mast curve.
The signed datasheet issued with the quotation is the binding version.
On the SRTE500, tyre choice should match the floor rather than the price list.
Dimensions are checked against the source record before quoting.
On the SRTE500, documents issued for an order are listed in the quotation.
Packing follows sea-freight practice for the chosen chassis.
On the SRTE500, loading is recorded before the container is sealed.
Quote the serial number and component name when ordering spares.
Ask for the specific certificate required for your target country.
Test and conformity documents follow the model and destination market.
The serial number identifies the build when parts are ordered later.
Questions
The listed rated capacity is 500 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
The listed service or net weight is 240 kg. This matters for floor loading, ramps and container plans.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Special-purpose handling equipment related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.