STFL32X Jack Series. The machine is specified against the load, floor and working height.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | Lifting Wt(ton) / Min.H(mm) / lifting.H(mm) / Adjust.H(mm) / Max.H(mm) / N.W(kg) / Package / Measurement(cm) / Quantity(pcs) / G.W(kg) / 20'Container(pcs) |
| STFL320 | 3 / 190 / 342 / 532 / 16 / COLOR BOX / 64X22X21 / 1 / 18 / 950 |
| Model | Lifting Wt(ton) / Min.H(mm) / lifting.H(mm) / Adjust.H(mm) / Max.H(mm) / N.W(kg) / Package / Measurement(cm) / Quantity(pcs) / G.W(kg) / 20'Container(pcs) |
| STFL321 | 3 / 135 / 360 / 495 / 28 / COLOR BOX / 67X37.5X20 / 1 / 29 / 500 |
| Model | Lifting Wt(ton) / Min.H(mm) / lifting.H(mm) / Adjust.H(mm) / Max.H(mm) / N.W(kg) / Package / Measurement(cm) / Quantity(pcs) / G.W(kg) / 20'Container(pcs) |
| STFL322 | 3 / 135 / 360 / 495 / 30 / COLOR BOX / 67X37.5X20 / 1 / 31 / 500 |
| Model | Lifting Wt(ton) / Min.H(mm) / lifting.H(mm) / Adjust.H(mm) / Max.H(mm) / N.W(kg) / Package / Measurement(cm) / Quantity(pcs) / G.W(kg) / 20'Container(pcs) |
| STFL323 | 3 / 135 / 360 / 495 / 32 / COLOR BOX / 67X37.5X20 / 1 / 33 / 500 |
| Model | Lifting Wt(ton) / Min.H(mm) / lifting.H(mm) / Adjust.H(mm) / Max.H(mm) / N.W(kg) / Package / Measurement(cm) / Quantity(pcs) / G.W(kg) / 20'Container(pcs) |
| STFL324 | 3 / 135 / 360 / 495 / 34 / COLOR BOX / 67X37.5X20 / 1 / 35 / 500 |
| Model | Lifting Wt(ton) / Min.H(mm) / lifting.H(mm) / Adjust.H(mm) / Max.H(mm) / N.W(kg) / Package / Measurement(cm) / Quantity(pcs) / G.W(kg) / 20'Container(pcs) |
| STFL325 | 3 / 135 / 385 / 520 / 36 / COLOR BOX / 77X39X21 / 1 / 37 / 430 |
| Model | Lifting Wt(ton) / Min.H(mm) / lifting.H(mm) / Adjust.H(mm) / Max.H(mm) / N.W(kg) / Package / Measurement(cm) / Quantity(pcs) / G.W(kg) / 20'Container(pcs) |
| STFL326 | 3 / 135 / 385 / 520 / 36 / COLOR BOX / 77X39X21 / 1 / 37 / 430 |
Gallery
All detail images published for this model.










STFL32X Jack Series, part of the Special-purpose handling equipment line.
Hand trucks and trolleys, stair-climbing carts, paper-roll and coil clamps, forklift attachments, jacks and other auxiliary tools that do not fit the powered-vehicle families.
Lifting and moving pallets
Each build is quoted line by line once the duty cycle is confirmed.
Selection starts from the load per move and the space around it.
This item belongs to the broader SUNRISE material handling catalogue.
Dimensions on the datasheet are checked against the site layout.
Confirm the aisle width against the pallet depth before choosing a chassis. Note cold store, outdoor gradient or container entry as a constraint.
The specification sheet records Model: Lifting Wt(ton) / Min.H(mm) / lifting.H(mm) / Adjust.H(mm) / Max.H(mm) / N.W(kg) / Package / Measurement(cm) / Quantity(pcs) / G.W(kg) / 20'Container(pcs); STFL320: 3 / 190 / 342 / 532 / 16 / COLOR BOX / 64X22X21 / 1 / 18 / 950; Model: Lifting Wt(ton) / Min.H(mm) / lifting.H(mm) / Adjust.H(mm) / Max.H(mm) / N.W(kg) / Package / Measurement(cm) / Quantity(pcs) / G.W(kg) / 20'Container(pcs); STFL321: 3 / 135 / 360 / 495 / 28 / COLOR BOX / 67X37.5X20 / 1 / 29 / 500; Model: Lifting Wt(ton) / Min.H(mm) / lifting.H(mm) / Adjust.H(mm) / Max.H(mm) / N.W(kg) / Package / Measurement(cm) / Quantity(pcs) / G.W(kg) / 20'Container(pcs); STFL322: 3 / 135 / 360 / 495 / 30 / COLOR BOX / 67X37.5X20 / 1 / 31 / 500.
The specification sheet records Model: Lifting Wt(ton) / Min.H(mm) / lifting.H(mm) / Adjust.H(mm) / Max.H(mm) / N.W(kg) / Package / Measurement(cm) / Quantity(pcs) / G.W(kg) / 20'Container(pcs); STFL323: 3 / 135 / 360 / 495 / 32 / COLOR BOX / 67X37.5X20 / 1 / 33 / 500; Model: Lifting Wt(ton) / Min.H(mm) / lifting.H(mm) / Adjust.H(mm) / Max.H(mm) / N.W(kg) / Package / Measurement(cm) / Quantity(pcs) / G.W(kg) / 20'Container(pcs); STFL324: 3 / 135 / 360 / 495 / 34 / COLOR BOX / 67X37.5X20 / 1 / 35 / 500; Model: Lifting Wt(ton) / Min.H(mm) / lifting.H(mm) / Adjust.H(mm) / Max.H(mm) / N.W(kg) / Package / Measurement(cm) / Quantity(pcs) / G.W(kg) / 20'Container(pcs); STFL325: 3 / 135 / 385 / 520 / 36 / COLOR BOX / 77X39X21 / 1 / 37 / 430.
The specification sheet records Model: Lifting Wt(ton) / Min.H(mm) / lifting.H(mm) / Adjust.H(mm) / Max.H(mm) / N.W(kg) / Package / Measurement(cm) / Quantity(pcs) / G.W(kg) / 20'Container(pcs); STFL326: 3 / 135 / 385 / 520 / 36 / COLOR BOX / 77X39X21 / 1 / 37 / 430.
An em dash marks a value the source record did not publish.
Those missing values can be requested directly through the enquiry form.
Rated figures apply at the standard load centre unless a row says otherwise.
Units are copied as published; convert them only when comparing models.
Configuration follows the load, working height and site layout.
The listed figures follow the record; options are confirmed on the quotation.
Door and beam heights decide which mast will clear the route.
List the models that clear each constraint before asking for a quote.
Compare capacity first, then the lift height the job actually needs.
Review the tyre type against the surface the machine will run on.
Check the chassis width against the aisle and the container door.
On the STFL32X, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
Measure the pallet footprint and the heaviest single load before comparing models.
On the STFL32X, note any slope, threshold or step along the working route.
Mark the stations where loads are picked up and dropped off each shift.
On the STFL32X, send photographs of the racking and the existing working area when possible.
On the STFL32X, unusual noise or movement is reported before further use.
The operator follows the rated capacity marked on the chassis.
On the STFL32X, attachments are secured before the machine leaves the station.
Battery or fuel levels are checked at the start of each shift.
On the STFL32X, spare parts for wear items follow the parts manual after delivery.
The receiving side pairs it with a dock ramp or platform where needed.
On the STFL32X, storage cages and racking organise the loads it moves between stations.
This machine usually works alongside pallet trucks and stacking equipment.
On the STFL32X, attachments are quoted separately once the base chassis is fixed.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the STFL32X, any option not listed should be confirmed in writing before order.
The signed datasheet issued with the quotation is the binding version.
On the STFL32X, loading is recorded before the container is sealed.
Quote the serial number and component name when ordering spares.
On the STFL32X, mixed equipment can be listed on one enquiry.
Wear parts are supplied after delivery against the parts manual.
The operation material covers controls, checks and routine service points.
Test and conformity documents follow the model and destination market.
The parts manual lists the wear items and their reference views.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Special-purpose handling equipment related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.