Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

ST880X — Jack Stand

ST880X Jack Series. Selection starts from the load per move and the space around it.

ST880X Jack Stand — product photo 1 of 2

Ordering facts for the ST880X

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

ST880X specification

Values are copied from the source record in their original order and units.

ST880X specification table
ParameterUnitLiftingWt(ton)Min.H(mm)lifting.H(mm)Max.H(mm)N.W(kg)PackageMeasurement(cm)Quantity(pcs)G.W(kg)20'Container(pcs)
Model—LiftingWt(ton)Min.H(mm)lifting.H(mm)Max.H(mm)N.W(kg)PackageMeasurement(cm)Quantity(pcs)G.W(kg)20'Container(pcs)
ST8802—22731524255COLORBOX19X18X3415.52400
ST8803—33051204255.5COLORBOX19.5X18X34162300
ST8806—641019060010COLORBOX28X23.5X421111000
Request price Datasheet (print / save as PDF) Ask about configuration

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

ST880X Jack Series, part of the Special-purpose handling equipment line.

Hand trucks and trolleys, stair-climbing carts, paper-roll and coil clamps, forklift attachments, jacks and other auxiliary tools that do not fit the powered-vehicle families.

Manual pallet jack duty

The enquiry should describe the station the equipment works at.

Each build is quoted line by line once the duty cycle is confirmed.

Selection starts from the load per move and the space around it.

This item belongs to the broader SUNRISE material handling catalogue.

State any attachment required alongside the base model. Match the tyre type to the floor surface rather than the price list.

Specification walk-through

The specification sheet records Model: Lifting / Wt(ton) / Min.H(mm) / lifting.H(mm) / Max.H(mm) / N.W(kg) / Package / Measurement(cm) / Quantity(pcs) / G.W(kg) / 20'Container(pcs); ST8802: 2 / 273 / 152 / 425 / 5 / COLOR / BOX / 19X18X34 / 1 / 5.5 / 2400; ST8803: 3 / 305 / 120 / 425 / 5.5 / COLOR / BOX / 19.5X18X34 / 1 / 6 / 2300; ST8806: 6 / 410 / 190 / 600 / 10 / COLOR / BOX / 28X23.5X42 / 1 / 11 / 1000.

Remaining parameters are listed row by row in the specification table.

Rated figures apply at the standard load centre unless a row says otherwise.

Those missing values can be requested directly through the enquiry form.

Each row in the table keeps the label and value from the source record.

Options and attachments are listed separately from the base chassis.

How to specify the right build

Configuration follows the load, working height and site layout.

Measure the pallet footprint before the chassis is shortlisted.

The enquiry should list any attachment the job requires.

Check the machine weight against floor loading where the site is raised.

List the models that clear each constraint before asking for a quote.

Check the chassis width against the aisle and the container door.

Compare capacity first, then the lift height the job actually needs.

  • State the shifts per day so the power arrangement can be sized properly.
  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.
  • List attachments such as clamps, sideshift or rotator separately.

Site preparation and operating notes

On the ST880X, check headroom under beams, pipes and door frames along the route.

Check the lowest door, beam height and aisle the truck has to pass through.

On the ST880X, send photographs of the racking and the existing working area when possible.

Measure the pallet footprint and the heaviest single load before comparing models.

On the ST880X, note any slope, threshold or step along the working route.

Operation and routine checks

On the ST880X, battery or fuel levels are checked at the start of each shift.

The operator follows the rated capacity marked on the chassis.

On the ST880X, the working area is kept clear of loose packaging and obstacles.

Loads are kept low while travelling between stations.

How this model fits the operation

On the ST880X, related models in the same group are listed on the family page.

A mixed enquiry can list this model together with other families.

On the ST880X, the layout drawing shows where each machine sits in the operation.

This machine usually works alongside pallet trucks and stacking equipment.

Working conditions and honest limits

On the ST880X, the specification sheet is the binding reference for listed values.

Any option not listed should be confirmed in writing before order.

On the ST880X, capacity above the rated lift height follows the mast curve.

Dimensions are checked against the source record before quoting.

Delivery, documents and support

On the ST880X, documents issued for an order are listed in the quotation.

Wear parts are supplied after delivery against the parts manual.

On the ST880X, quotations follow the model, listed specification and destination port.

Mixed equipment can be listed on one enquiry.

The parts manual lists the wear items and their reference views.

The operation material covers controls, checks and routine service points.

Ask for the specific certificate required for your target country.

Before you order

  • Capacity shown is the rated figure at the stated load centre; above the rated lift height the capacity follows the mast curve.
  • Dimensions in the specification come from the source record — check them against the container door, the lowest door on the route and the aisle before ordering.
  • Attachment options are confirmed on the quotation; their weight and width are counted against the residual capacity.
  • The certificate set for an order follows the destination market; ISO factory certificates and the serial list ship with the consignment.
  • Spare parts follow the parts manual supplied with the machine; quote the serial number and component name when ordering wear parts.

Questions

Questions buyers ask before ordering

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Which ports can the machine ship from?+

Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Special-purpose handling equipment related models

ModelCapacityLiftPowerTypical use
WCR-120E/030C———Site-specific lifting and moving tasks
WPR-10———Site-specific lifting and moving tasks
ST02(2ton———Manual pallet jack duty
STFL32X———Lifting and moving pallets
GC———Hand and trolley duties

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.