ST02(2ton to 100ton) Jack Series. This item belongs to the broader SUNRISE material handling catalogue.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Unit | Lifting | Wt(ton) | Min.H(mm) | lifting.H(mm) | Adjust.H(mm) | Max.H(mm) | N.W(kg) | Measurement(cm) | Quantity(pcs) | G.W(kg) | 20'Container(pcs) | Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model | — | Lifting | Wt(ton) | Min.H(mm) | lifting.H(mm) | Adjust.H(mm) | Max.H(mm) | N.W(kg) | Measurement(cm) | Quantity(pcs) | G.W(kg) | 20'Container(pcs) | Package |
| ST0202 | — | 2 | 185 | 90 | 60 | 308 | 2.3 | 52X25.5X19 | 10 | 24 | 7800 | Color | Box |
| ST0402 | — | 4 | 195 | 125 | 60 | 380 | 3.3 | 46X26.5X22.5 | 8 | 28 | 5400 | Color | Box |
| ST0602 | — | 6 / 197 / 125 / 60 / 382 / 4.4 / 37X27.5X22.5 / 28 / 4200 / Color Box | |||||||||||
| ST0802 | — | 8 | 205 | 125 | 60 | 390 | 5.4 | 29.5X27.5X23 | 4 | 23 | 3340 | Color | Box |
| ST1002 | — | 10 | 205 | 125 | 60 | 390 | 6 | 30.5X29.5X24 | 4 | 25 | 3000 | Color | Box |
| ST1202 | — | 12 | 215 | 125 | 60 | 400 | 7.2 | 30.5X16.5X24 | 2 | 16 | 2500 | Color | Box |
| ST1602 | — | 16 | 225 | 140 | 60 | 425 | 8 | 31.5X17X24.5 | 2 | 17 | 2250 | Color | Box |
| ST2002 | — | 20 | 244 | 145 | 60 | 449 | 11 | 34.5X19.5X27 | 2 | 24 | 1500 | Color | Box |
| ST3202A | — | 32 / 285 / 180 / 465 / 14.5 / 37.5X19X31 / 2 / 30 / 1240 / Color Box | |||||||||||
| ST3202 | — | 32 / 285 / 180 / 465 / 17.5 / 37.5X19X31 / 2 / 36 / 1060 / Color Box | |||||||||||
| ST5002 | — | 50 / 300 / 180 / 480 / 33 / 24X22X32 / 1 / 34 / 540 / Color Box | |||||||||||
| ST10002 | — | 100 / 340 / 180 / 520 / 75 / 32.5x26.5x36 / 1 / 77 / 240 / Color Box | |||||||||||
Gallery
All detail images published for this model.



ST02(2ton to 100ton) Jack Series, part of the Special-purpose handling equipment line.
Hand trucks and trolleys, stair-climbing carts, paper-roll and coil clamps, forklift attachments, jacks and other auxiliary tools that do not fit the powered-vehicle families.
Manual pallet jack duty
The machine is specified against the load, floor and working height.
Each build is quoted line by line once the duty cycle is confirmed.
Dimensions on the datasheet are checked against the site layout.
The machine is specified against the load, floor and working height.
Describe the shifts per day when the power arrangement is selected. Check closed mast or chassis height against the lowest door on the route.
The specification sheet records Model: Lifting / Wt(ton) / Min.H(mm) / lifting.H(mm) / Adjust.H(mm) / Max.H(mm) / N.W(kg) / Measurement(cm) / Quantity(pcs) / G.W(kg) / 20'Container(pcs) / Package; ST0202: 2 / 185 / 90 / 60 / 308 / 2.3 / 52X25.5X19 / 10 / 24 / 7800 / Color / Box; ST0402: 4 / 195 / 125 / 60 / 380 / 3.3 / 46X26.5X22.5 / 8 / 28 / 5400 / Color / Box; ST0602: 6 / 197 / 125 / 60 / 382 / 4.4 / 37X27.5X22.5 / 28 / 4200 / Color Box; ST0802: 8 / 205 / 125 / 60 / 390 / 5.4 / 29.5X27.5X23 / 4 / 23 / 3340 / Color / Box; ST1002: 10 / 205 / 125 / 60 / 390 / 6 / 30.5X29.5X24 / 4 / 25 / 3000 / Color / Box.
The specification sheet records ST1202: 12 / 215 / 125 / 60 / 400 / 7.2 / 30.5X16.5X24 / 2 / 16 / 2500 / Color / Box; ST1602: 16 / 225 / 140 / 60 / 425 / 8 / 31.5X17X24.5 / 2 / 17 / 2250 / Color / Box; ST2002: 20 / 244 / 145 / 60 / 449 / 11 / 34.5X19.5X27 / 2 / 24 / 1500 / Color / Box; ST3202A: 32 / 285 / 180 / 465 / 14.5 / 37.5X19X31 / 2 / 30 / 1240 / Color Box; ST3202: 32 / 285 / 180 / 465 / 17.5 / 37.5X19X31 / 2 / 36 / 1060 / Color Box; ST5002: 50 / 300 / 180 / 480 / 33 / 24X22X32 / 1 / 34 / 540 / Color Box.
The specification sheet records ST10002: 100 / 340 / 180 / 520 / 75 / 32.5x26.5x36 / 1 / 77 / 240 / Color Box.
Rated figures apply at the standard load centre unless a row says otherwise.
Options and attachments are listed separately from the base chassis.
An em dash marks a value the source record did not publish.
Each row in the table keeps the label and value from the source record.
Configuration follows the load, working height and site layout.
The enquiry should list any attachment the job requires.
Door and beam heights decide which mast will clear the route.
Check the machine weight against floor loading where the site is raised.
Match the power arrangement to the shifts and the working environment.
Compare the lowered height against the lowest door on the route.
Compare capacity first, then the lift height the job actually needs.
On the ST02(2ton to 100ton), keep the charging or refuelling position clear of the main traffic aisle.
Check the lowest door, beam height and aisle the truck has to pass through.
On the ST02(2ton to 100ton), mark the stations where loads are picked up and dropped off each shift.
State the shifts per day so the power arrangement can be sized properly.
On the ST02(2ton to 100ton), note any slope, threshold or step along the working route.
On the ST02(2ton to 100ton), attachments are secured before the machine leaves the station.
The working area is kept clear of loose packaging and obstacles.
On the ST02(2ton to 100ton), loads are kept low while travelling between stations.
The operator checks load stability before each lift or move.
On the ST02(2ton to 100ton), storage cages and racking organise the loads it moves between stations.
Attachments such as clamps or rotators are matched to the load shape.
On the ST02(2ton to 100ton), related models in the same group are listed on the family page.
This machine usually works alongside pallet trucks and stacking equipment.
On the ST02(2ton to 100ton), the specification sheet is the binding reference for listed values.
Any option not listed should be confirmed in writing before order.
On the ST02(2ton to 100ton), capacity above the rated lift height follows the mast curve.
Attachments are quoted separately once the base chassis is fixed.
On the ST02(2ton to 100ton), mixed equipment can be listed on one enquiry.
The operation and parts material travel with the machine.
On the ST02(2ton to 100ton), the enquiry should include the quantity and destination port.
Documents issued for an order are listed in the quotation.
The operation material covers controls, checks and routine service points.
Test and conformity documents follow the model and destination market.
Ask for the specific certificate required for your target country.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Special-purpose handling equipment related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.