Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

Lithium pallet truck — pallet truck

Lithium pallet truck Lithium pallet truck, lift height 195. Pallet trucks move palletised loads across a floor or into a container.

Lithium pallet truck — product photo 1 of 7

Ordering facts for the Lithium pallet truck

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

Lithium pallet truck specification

Values are copied from the source record in their original order and units.

Lithium pallet truck specification table
ParameterValue
1 ManufacturerSunrise
2 ModelLEP-15ME; LEP-20ME
3 Operator typeWalkie
4 Load Capacity QLEP-15ME: 1500; LEP-20ME: 2000
5 Load Center CLEP-15ME: 600; LEP-20ME: 600
6 Wheelbase YLEP-15ME: 1202/1272; LEP-20ME: 1202/1272
7 Service WeightLEP-15ME: 120/125; LEP-20ME: 125/130
8 Overall Height H11280
9 Lift Height H2195
10 Fork Height (Lowered) H385
11 Overall Length L11555/1625
12 Overall Width B540/680
13 Fork Size L2540x150/680x1220
14 Travel Motor750w
15 Travel Speed (laden/unladen)4/4.5
16 Max. Gradeability (laden/unladen)LEP-15ME: 8%/20%; LEP-20ME: 5%/20%
17 Battery Voltage/Capacity24V/20Ah Li-Battery
18 Turning Radius R1352/1422
19 Lift Motor500w
2 ModelLEP-15MH; LEP-20MH
3 Operator typeWalkie
4 Load Capacity QLEP-15MH: 1500; LEP-20MH: 2000
5 Load Center CLEP-15MH: 600; LEP-20MH: 600
6 Wheelbase YLEP-15MH: 1202/1272; LEP-20MH: 1202/1272
7 Service WeightLEP-15MH: 115/120; LEP-20MH: 120/125
8 Overall Height H11280
9 Lift Height H2200
10 Fork Height (Lowered) H385
11 Overall Length L11555/1625
12 Overall Width B540/680
13 Fork Size L2540x150/680x1220
14 Travel Speed (laden/unladen)4/4.5
15 Max. Gradeability (laden/unladen)LEP-15MH: 8%/20%; LEP-20MH: 5%/20%
16 Battery Voltage/Capacity24V/20Ah Li-Battery
17 Turning Radius R1352/1422
18 Travel Motor750w
Request price Datasheet (print / save as PDF) Ask about voltage

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

Lithium pallet truck Lithium pallet truck, part of the Pallet trucks line.

Hand, semi-electric and powered pallet trucks for horizontal pallet transport.

Floor pallet moving

Published figures for this build: rated capacity LEP-15ME: 1500; LEP-20ME: 2000, lift height 195 mm, overall width 540/680, turning radius 1352/1422.

Pallet trucks move palletised loads across a floor or into a container.

Hand versions keep a simple hydraulic pump for short repeated moves.

Hand and powered pallet trucks are the first dock unloading tool.

Powered versions reduce walking distance on long warehouse runs.

Check closed mast or chassis height against the lowest door on the route. Confirm the aisle width against the pallet depth before choosing a chassis.

Specification walk-through

The specification sheet records Specification is not published in the source record; Manufacturer: Sunrise; Model: LEP-15ME; LEP-20ME; Operator type: Walkie; Load Capacity Q (kg): LEP-15ME: 1500; LEP-20ME: 2000; Load Center C (mm): LEP-15ME: 600; LEP-20ME: 600.

The specification sheet records Wheelbase Y (mm): LEP-15ME: 1202/1272; LEP-20ME: 1202/1272; Service Weight (kg): LEP-15ME: 120/125; LEP-20ME: 125/130; Overall Height H1 (mm): 1280; Lift Height H2 (mm): 195; Fork Height (Lowered) H3 (mm): 85; Overall Length L1 (mm): 1555/1625.

The specification sheet records Overall Width B (mm): 540/680; Fork Size L2 (mm): 540x150/680x1220; Travel Motor: 750w; Travel Speed (laden/unladen) (km/h): 4/4.5; Max. Gradeability (laden/unladen) (%): LEP-15ME: 8%/20%; LEP-20ME: 5%/20%; Battery Voltage/Capacity (V/Ah): 24V/20Ah Li-Battery.

The specification sheet records Turning Radius R (mm): 1352/1422; Lift Motor: 500w; Specification is not published in the source record; Model: LEP-15MH; LEP-20MH; Operator type: Walkie; Load Capacity Q (kg): LEP-15MH: 1500; LEP-20MH: 2000.

The specification sheet records Load Center C (mm): LEP-15MH: 600; LEP-20MH: 600; Wheelbase Y (mm): LEP-15MH: 1202/1272; LEP-20MH: 1202/1272; Service Weight (kg): LEP-15MH: 115/120; LEP-20MH: 120/125; Overall Height H1 (mm): 1280; Lift Height H2 (mm): 200; Fork Height (Lowered) H3 (mm): 85.

The specification sheet records Overall Length L1 (mm): 1555/1625; Overall Width B (mm): 540/680; Fork Size L2 (mm): 540x150/680x1220; Travel Speed (laden/unladen) (km/h): 4/4.5; Max. Gradeability (laden/unladen) (%): LEP-15MH: 8%/20%; LEP-20MH: 5%/20%; Battery Voltage/Capacity (V/Ah): 24V/20Ah Li-Battery.

The specification sheet records Turning Radius R (mm): 1352/1422; Travel Motor: 750w.

Options and attachments are listed separately from the base chassis.

Those missing values can be requested directly through the enquiry form.

An em dash marks a value the source record did not publish.

Each row in the table keeps the label and value from the source record.

How to specify the right build

Configuration follows the load, working height and site layout.

The enquiry should list any attachment the job requires.

The listed figures follow the record; options are confirmed on the quotation.

List the models that clear each constraint before asking for a quote.

Review the tyre type against the surface the machine will run on.

Match the power arrangement to the shifts and the working environment.

Check the machine weight against floor loading where the site is raised.

  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.
  • State the shifts per day so the power arrangement can be sized properly.
  • Send those figures with the model code; the reply confirms whether the chassis suits.

Site preparation and operating notes

On the Lithium pallet truck, list the attachments required, such as clamps, sideshift or rotator.

Send photographs of the racking and the existing working area when possible.

On the Lithium pallet truck, mark the stations where loads are picked up and dropped off each shift.

Keep the charging or refuelling position clear of the main traffic aisle.

On the Lithium pallet truck, check the lowest door, beam height and aisle the truck has to pass through.

Operation and routine checks

On the Lithium pallet truck, routine checks cover tyres, brakes, controls and visible leaks.

Unusual noise or movement is reported before further use.

On the Lithium pallet truck, the operator follows the rated capacity marked on the chassis.

The working area is kept clear of loose packaging and obstacles.

How this model fits the operation

On the Lithium pallet truck, related models in the same group are listed on the family page.

Spare parts for wear items follow the parts manual after delivery.

On the Lithium pallet truck, the layout drawing shows where each machine sits in the operation.

Attachments such as clamps or rotators are matched to the load shape.

Working conditions and honest limits

On the Lithium pallet truck, site conditions such as gradient, dust and moisture belong in the enquiry.

Attachments are quoted separately once the base chassis is fixed.

On the Lithium pallet truck, any option not listed should be confirmed in writing before order.

Capacity above the rated lift height follows the mast curve.

Delivery, documents and support

On the Lithium pallet truck, quotations follow the model, listed specification and destination port.

The operation and parts material travel with the machine.

On the Lithium pallet truck, the enquiry should include the quantity and destination port.

Wear parts are supplied after delivery against the parts manual.

The serial number identifies the build when parts are ordered later.

Test and conformity documents follow the model and destination market.

The parts manual lists the wear items and their reference views.

Before you order

  • Compare the published capacity against the heaviest single move before the mast or attachment is chosen.
  • Check overall width and turning space against the aisle and any narrow doorway before the chassis is shortlisted.
  • Attachments are quoted separately once the base chassis is fixed, so the attachment weight can be counted against the residual capacity.
  • The certificate set for an order follows the destination market; ISO factory certificates and the serial list ship with the consignment.
  • The parts manual ships with the machine; identify wear items by serial number and part name when reordering.

Questions

Questions buyers ask before ordering

What lift height is available?+

The specification sheet lists 195 for this build. Send the rack beam and door heights together to size the mast.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Pallet trucks related models

ModelCapacityLiftPowerTypical use
AC20———Horizontal pallet transport
DF20———Container pallet stripping
CBY-5.0T5000 kg——Floor pallet moving
CBY-CW———Short internal runs
LEP-15E———Container pallet stripping

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.