CBY-CW Hand Pallet Truck. Pallet trucks move palletised loads across a floor or into a container.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | CBY-CW |
| Capacity | 1500/2000/2500/3000 kg |
| Max.fork height | 195 mm |
| Min.fork height | 85 mm |
| Fork overall width | 550/685 mm |
| Fork length | 1150/1220 mm |
| Steering Wheel | φ180x50 mm |
| Fork wheel | φ80x70 mm |
| Self Weight | 120-130 kg |
Gallery
All detail images published for this model.

CBY-CW Hand Pallet Truck, part of the Pallet trucks line.
Hand, semi-electric and powered pallet trucks for horizontal pallet transport.
Short internal runs
Published figures for this build: rated capacity 1500/2000/2500/3000 kg, overall width 550/685 mm.
Hand versions keep a simple hydraulic pump for short repeated moves.
Hand and powered pallet trucks are the first dock unloading tool.
The chassis stays low, so forks slide under a standard pallet.
Pallet trucks move palletised loads across a floor or into a container.
Describe the shifts per day when the power arrangement is selected. State any attachment required alongside the base model.
The specification sheet records Model: CBY-CW; Capacity (kg): 1500/2000/2500/3000 kg; Max.fork height (mm): 195 mm; Min.fork height (mm): 85 mm; Fork overall width (mm): 550/685 mm; Fork length (mm): 1150/1220 mm.
The specification sheet records Steering Wheel (mm): φ180x50 mm; Fork wheel (mm): φ80x70 mm; Self Weight (kg): 120-130 kg.
Units are copied as published; convert them only when comparing models.
An em dash marks a value the source record did not publish.
Each row in the table keeps the label and value from the source record.
Those missing values can be requested directly through the enquiry form.
Configuration follows the load, working height and site layout.
Measure the pallet footprint before the chassis is shortlisted.
Send pallet size, door height and aisle width with the enquiry.
Compare capacity first, then the lift height the job actually needs.
Check the chassis width against the aisle and the container door.
Review the tyre type against the surface the machine will run on.
Match the power arrangement to the shifts and the working environment.
On the CBY-CW, check the lowest door, beam height and aisle the truck has to pass through.
State the shifts per day so the power arrangement can be sized properly.
On the CBY-CW, list the attachments required, such as clamps, sideshift or rotator.
Note any slope, threshold or step along the working route.
On the CBY-CW, check headroom under beams, pipes and door frames along the route.
On the CBY-CW, the operator follows the rated capacity marked on the chassis.
The working area is kept clear of loose packaging and obstacles.
On the CBY-CW, the operator checks load stability before each lift or move.
Unusual noise or movement is reported before further use.
On the CBY-CW, this machine usually works alongside pallet trucks and stacking equipment.
The receiving side pairs it with a dock ramp or platform where needed.
On the CBY-CW, storage cages and racking organise the loads it moves between stations.
The layout drawing shows where each machine sits in the operation.
On the CBY-CW, capacity above the rated lift height follows the mast curve.
Attachments are quoted separately once the base chassis is fixed.
On the CBY-CW, the signed datasheet issued with the quotation is the binding version.
The specification sheet is the binding reference for listed values.
On the CBY-CW, loading is recorded before the container is sealed.
The enquiry should include the quantity and destination port.
On the CBY-CW, mixed equipment can be listed on one enquiry.
The operation and parts material travel with the machine.
The operation material covers controls, checks and routine service points.
The parts manual lists the wear items and their reference views.
Test and conformity documents follow the model and destination market.
Questions
The listed service or net weight is 120-130 kg. This matters for floor loading, ramps and container plans.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.