CBY-5.0T Hand Pallet Truck, rated capacity 5000 kg. Hand versions keep a simple hydraulic pump for short repeated moves.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | CBY-5.0T |
| Capacity | 5000 kg |
| Max.fork height | 195 mm |
| Min.fork height | 85 mm |
| Fork overall width | 550/685 mm |
| Fork length | 1150/1220 mm |
| Steering Wheel | φ180x52 mm |
| Fork wheel | φ80x70 mm |
| Self Weight | 120/130 kg |
Gallery
All detail images published for this model.




CBY-5.0T Hand Pallet Truck, part of the Pallet trucks line.
Hand, semi-electric and powered pallet trucks for horizontal pallet transport.
Floor pallet moving
Published figures for this build: rated capacity 5000 kg, overall width 550/685 mm.
Hand and powered pallet trucks are the first dock unloading tool.
Hand versions keep a simple hydraulic pump for short repeated moves.
Hand versions keep a simple hydraulic pump for short repeated moves.
Pallet trucks move palletised loads across a floor or into a container.
Describe the shifts per day when the power arrangement is selected. State any attachment required alongside the base model.
The specification sheet records Model: CBY-5.0T; Capacity (kg): 5000 kg; Max.fork height (mm): 195 mm; Min.fork height (mm): 85 mm; Fork overall width (mm): 550/685 mm; Fork length (mm): 1150/1220 mm.
The specification sheet records Steering Wheel (mm): φ180x52 mm; Fork wheel (mm): φ80x70 mm; Self Weight (kg): 120/130 kg.
Each row in the table keeps the label and value from the source record.
Those missing values can be requested directly through the enquiry form.
Rated figures apply at the standard load centre unless a row says otherwise.
Options and attachments are listed separately from the base chassis.
Configuration follows the load, working height and site layout.
The enquiry should list any attachment the job requires.
The listed figures follow the record; options are confirmed on the quotation.
Compare the lowered height against the lowest door on the route.
Match the power arrangement to the shifts and the working environment.
Check the machine weight against floor loading where the site is raised.
List the models that clear each constraint before asking for a quote.
On the CBY-5.0T, send photographs of the racking and the existing working area when possible.
Check headroom under beams, pipes and door frames along the route.
On the CBY-5.0T, check the lowest door, beam height and aisle the truck has to pass through.
Note any slope, threshold or step along the working route.
On the CBY-5.0T, keep the charging or refuelling position clear of the main traffic aisle.
On the CBY-5.0T, the operator checks load stability before each lift or move.
Battery or fuel levels are checked at the start of each shift.
On the CBY-5.0T, unusual noise or movement is reported before further use.
Attachments are secured before the machine leaves the station.
On the CBY-5.0T, a mixed enquiry can list this model together with other families.
This machine usually works alongside pallet trucks and stacking equipment.
On the CBY-5.0T, spare parts for wear items follow the parts manual after delivery.
The receiving side pairs it with a dock ramp or platform where needed.
On the CBY-5.0T, attachments are quoted separately once the base chassis is fixed.
The signed datasheet issued with the quotation is the binding version.
On the CBY-5.0T, site conditions such as gradient, dust and moisture belong in the enquiry.
Tyre choice should match the floor rather than the price list.
On the CBY-5.0T, the enquiry should include the quantity and destination port.
Packing follows sea-freight practice for the chosen chassis.
On the CBY-5.0T, documents issued for an order are listed in the quotation.
The booking reference is issued with the proforma invoice.
The parts manual lists the wear items and their reference views.
The serial number identifies the build when parts are ordered later.
Test and conformity documents follow the model and destination market.
Questions
The listed rated capacity is 5000 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.