AC20 AC25 AC30 Hand Pallet Truck. Hand and powered pallet trucks are the first dock unloading tool.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Item/Type | AC15/20 / AC25 / AC30 |
| Capacity Q | 1500/2000 / 2500 / 3000 kg |
| Min.fork height h | 85 / 75 mm |
| Max.fork height h1 | 200 / 190 mm |
| Steering wheel | Φ200x50 / Φ180x50 mm |
| Load roller Single | Φ80x93 / Φ74x93 mm |
| Load roller Tandem | Φ80x70 / Φ74x70 mm |
| Size of fork e*s | 160x50 / 160x60 mm |
| Width overall forks B | 450/520/540/685 mm |
| Fork length I | 800/900/1000/1100/1150/1220 mm |
| Item/Type | ACE20 / ACL |
| Capacity Q | 2000 / 1500 / 1000 kg |
| Min.fork height h | 75/85 mm |
| Max.fork height h1 | 190/200 mm |
| Steering wheel | Φ180x50/Φ200x50 mm |
| Load roller Single | Φ74x93/Φ80x93 mm |
| Load roller Tandem | Φ74x70/Φ80x70 mm |
| Size of fork e*s | 160x50 / 160x60 mm |
| Width overall forks B | 838 / 540/685 mm |
| Fork length I | 1100/1150/1220 / 1500/1800/2000/2500/3000 mm |
Gallery
All detail images published for this model.



AC20 AC25 AC30 Hand Pallet Truck, part of the Pallet trucks line.
Hand, semi-electric and powered pallet trucks for horizontal pallet transport.
Horizontal pallet transport
Published figures for this build: rated capacity 1500/2000 / 2500 / 3000 kg.
Hand and powered pallet trucks are the first dock unloading tool.
Hand and powered pallet trucks are the first dock unloading tool.
Hand and powered pallet trucks are the first dock unloading tool.
Powered versions reduce walking distance on long warehouse runs.
Check closed mast or chassis height against the lowest door on the route. Confirm the aisle width against the pallet depth before choosing a chassis.
The specification sheet records Item/Type: AC15/20 / AC25 / AC30; Capacity Q (kg): 1500/2000 / 2500 / 3000 kg; Min.fork height h (mm): 85 / 75 mm; Max.fork height h1 (mm): 200 / 190 mm; Steering wheel (mm): Φ200x50 / Φ180x50 mm; Load roller Single (mm): Φ80x93 / Φ74x93 mm.
The specification sheet records Load roller Tandem (mm): Φ80x70 / Φ74x70 mm; Size of fork e*s (mm): 160x50 / 160x60 mm; Width overall forks B (mm): 450/520/540/685 mm; Fork length I (mm): 800/900/1000/1100/1150/1220 mm; Item/Type: ACE20 / ACL; Capacity Q (kg): 2000 / 1500 / 1000 kg.
The specification sheet records Min.fork height h (mm): 75/85 mm; Max.fork height h1 (mm): 190/200 mm; Steering wheel (mm): Φ180x50/Φ200x50 mm; Load roller Single (mm): Φ74x93/Φ80x93 mm; Load roller Tandem (mm): Φ74x70/Φ80x70 mm; Size of fork e*s (mm): 160x50 / 160x60 mm.
The specification sheet records Width overall forks B (mm): 838 / 540/685 mm; Fork length I (mm): 1100/1150/1220 / 1500/1800/2000/2500/3000 mm.
Those missing values can be requested directly through the enquiry form.
Rated figures apply at the standard load centre unless a row says otherwise.
Units are copied as published; convert them only when comparing models.
Options and attachments are listed separately from the base chassis.
Configuration follows the load, working height and site layout.
Send pallet size, door height and aisle width with the enquiry.
Measure the pallet footprint before the chassis is shortlisted.
Review the tyre type against the surface the machine will run on.
Match the power arrangement to the shifts and the working environment.
Check the chassis width against the aisle and the container door.
Compare the lowered height against the lowest door on the route.
On the AC20 AC25 AC30, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
Mark the stations where loads are picked up and dropped off each shift.
On the AC20 AC25 AC30, note any slope, threshold or step along the working route.
List the attachments required, such as clamps, sideshift or rotator.
On the AC20 AC25 AC30, measure the pallet footprint and the heaviest single load before comparing models.
On the AC20 AC25 AC30, attachments are secured before the machine leaves the station.
The working area is kept clear of loose packaging and obstacles.
On the AC20 AC25 AC30, the operator follows the rated capacity marked on the chassis.
Loads are kept low while travelling between stations.
On the AC20 AC25 AC30, the layout drawing shows where each machine sits in the operation.
Related models in the same group are listed on the family page.
On the AC20 AC25 AC30, spare parts for wear items follow the parts manual after delivery.
Storage cages and racking organise the loads it moves between stations.
On the AC20 AC25 AC30, site conditions such as gradient, dust and moisture belong in the enquiry.
Capacity above the rated lift height follows the mast curve.
On the AC20 AC25 AC30, the specification sheet is the binding reference for listed values.
Dimensions are checked against the source record before quoting.
On the AC20 AC25 AC30, wear parts are supplied after delivery against the parts manual.
Loading is recorded before the container is sealed.
On the AC20 AC25 AC30, the booking reference is issued with the proforma invoice.
Mixed equipment can be listed on one enquiry.
Test and conformity documents follow the model and destination market.
The parts manual lists the wear items and their reference views.
The operation material covers controls, checks and routine service points.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.