DF20 DF25 DF30 Hand Pallet Truck. The chassis stays low, so forks slide under a standard pallet.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Item/Type | DF20/DF25/DF30 |
| Capacity Q | 2000/2500/3000 kg |
| Min.fork height h | 85 / 75 mm |
| Max.fork height h1 | 200 / 190 mm |
| Steering wheel | Φ200x50 / Φ180x50 mm |
| Load roller Single | Φ80x93 / Φ74x93 mm |
| Load roller Tandem | Φ80x70 / Φ74x70 mm |
| Size of fork e*s | 160x60 mm |
| Width overall forks B | 450/520/550/685 mm |
| Fork length I | 800/900/1000/1100/1150/1220 mm |
Gallery
All detail images published for this model.


DF20 DF25 DF30 Hand Pallet Truck, part of the Pallet trucks line.
Hand, semi-electric and powered pallet trucks for horizontal pallet transport.
Container pallet stripping
Published figures for this build: rated capacity 2000/2500/3000 kg.
Powered versions reduce walking distance on long warehouse runs.
Hand versions keep a simple hydraulic pump for short repeated moves.
Hand and powered pallet trucks are the first dock unloading tool.
Powered versions reduce walking distance on long warehouse runs.
Check closed mast or chassis height against the lowest door on the route. Confirm the aisle width against the pallet depth before choosing a chassis.
The specification sheet records Item/Type: DF20/DF25/DF30; Capacity Q (kg): 2000/2500/3000 kg; Min.fork height h (mm): 85 / 75 mm; Max.fork height h1 (mm): 200 / 190 mm; Steering wheel (mm): Φ200x50 / Φ180x50 mm; Load roller Single (mm): Φ80x93 / Φ74x93 mm.
The specification sheet records Load roller Tandem (mm): Φ80x70 / Φ74x70 mm; Size of fork e*s (mm): 160x60 mm; Width overall forks B (mm): 450/520/550/685 mm; Fork length I (mm): 800/900/1000/1100/1150/1220 mm.
Units are copied as published; convert them only when comparing models.
Those missing values can be requested directly through the enquiry form.
Options and attachments are listed separately from the base chassis.
An em dash marks a value the source record did not publish.
Configuration follows the load, working height and site layout.
Dimensions in the table come from the source record.
The listed figures follow the record; options are confirmed on the quotation.
Note any attachment that changes the load centre or the overall width.
Match the power arrangement to the shifts and the working environment.
List the models that clear each constraint before asking for a quote.
Check the machine weight against floor loading where the site is raised.
On the DF20 DF25 DF30, state the shifts per day so the power arrangement can be sized properly.
Check headroom under beams, pipes and door frames along the route.
On the DF20 DF25 DF30, measure the pallet footprint and the heaviest single load before comparing models.
Check the lowest door, beam height and aisle the truck has to pass through.
On the DF20 DF25 DF30, note any slope, threshold or step along the working route.
On the DF20 DF25 DF30, the working area is kept clear of loose packaging and obstacles.
Loads are kept low while travelling between stations.
On the DF20 DF25 DF30, attachments are secured before the machine leaves the station.
The operator follows the rated capacity marked on the chassis.
On the DF20 DF25 DF30, storage cages and racking organise the loads it moves between stations.
The receiving side pairs it with a dock ramp or platform where needed.
On the DF20 DF25 DF30, related models in the same group are listed on the family page.
Spare parts for wear items follow the parts manual after delivery.
On the DF20 DF25 DF30, dimensions are checked against the source record before quoting.
Attachments are quoted separately once the base chassis is fixed.
On the DF20 DF25 DF30, the specification sheet is the binding reference for listed values.
Capacity above the rated lift height follows the mast curve.
On the DF20 DF25 DF30, mixed equipment can be listed on one enquiry.
Packing follows sea-freight practice for the chosen chassis.
On the DF20 DF25 DF30, documents issued for an order are listed in the quotation.
Wear parts are supplied after delivery against the parts manual.
Test and conformity documents follow the model and destination market.
The operation material covers controls, checks and routine service points.
Ask for the specific certificate required for your target country.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.