LEP-15E Electric Pallet Truck, 205 kg. The chassis stays low, so forks slide under a standard pallet.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | LEP-15E |
| Load capacity | / 1500 |
| Service weight | 205 kg |
| Fork height, lowered | h 13 (mm) / 85 |
| Overall length | 1 (mm) / 1600 |
| Overall width | b 1 / b 2 (mm) / 560 |
| Fork spread | b 5 (mm) / 560 |
| Aisle width, 1000×1200 pallet crossways | / 1930 |
| Aisle width, 800×1200 pallet lengthways | / 1780 |
| Outer turning radius | / 1475 |
| Travel speed, laden/ unladen | km/ h / 3.5/4 |
| Maximum gradeability, laden/ unladen S 2 5 min. | 3/ 10 % |
| Battery voltage/ rated capacity | V/ Ah / 24/70*2 |
Gallery
All detail images published for this model.

LEP-15E Electric Pallet Truck, part of the Pallet trucks line.
Hand, semi-electric and powered pallet trucks for horizontal pallet transport.
Container pallet stripping
Published figures for this build: rated capacity / 1500, overall width b 1 / b 2 (mm) / 560, turning radius / 1930.
Hand and powered pallet trucks are the first dock unloading tool.
The chassis stays low, so forks slide under a standard pallet.
Hand versions keep a simple hydraulic pump for short repeated moves.
Hand and powered pallet trucks are the first dock unloading tool.
Confirm the charger voltage or fuel type for your destination country. Compare rated capacity against the heaviest single load you move.
The specification sheet records Model: LEP-15E; Load capacity (kg): / 1500; Service weight (Incl. battery): 205 kg; Fork height, lowered: h 13 (mm) / 85; Overall length (l): 1 (mm) / 1600; Overall width: b 1 / b 2 (mm) / 560.
The specification sheet records Fork spread: b 5 (mm) / 560; Aisle width, 1000×1200 pallet crossways (mm): / 1930; Aisle width, 800×1200 pallet lengthways (mm): / 1780; Outer turning radius (mm): / 1475; Travel speed, laden/ unladen: km/ h / 3.5/4; Maximum gradeability, laden/ unladen S 2 5 min. (%): 3/ 10 %.
The specification sheet records Battery voltage/ rated capacity (5h): V/ Ah / 24/70*2.
Options and attachments are listed separately from the base chassis.
Units are copied as published; convert them only when comparing models.
An em dash marks a value the source record did not publish.
Those missing values can be requested directly through the enquiry form.
Configuration follows the load, working height and site layout.
Send pallet size, door height and aisle width with the enquiry.
Measure the pallet footprint before the chassis is shortlisted.
Match the power arrangement to the shifts and the working environment.
Check the chassis width against the aisle and the container door.
Compare the lowered height against the lowest door on the route.
Review the tyre type against the surface the machine will run on.
On the LEP-15E, send photographs of the racking and the existing working area when possible.
Measure the pallet footprint and the heaviest single load before comparing models.
On the LEP-15E, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
Keep the charging or refuelling position clear of the main traffic aisle.
On the LEP-15E, note any slope, threshold or step along the working route.
On the LEP-15E, the operator follows the rated capacity marked on the chassis.
Routine checks cover tyres, brakes, controls and visible leaks.
On the LEP-15E, unusual noise or movement is reported before further use.
Loads are kept low while travelling between stations.
On the LEP-15E, this machine usually works alongside pallet trucks and stacking equipment.
A mixed enquiry can list this model together with other families.
On the LEP-15E, the layout drawing shows where each machine sits in the operation.
Attachments such as clamps or rotators are matched to the load shape.
On the LEP-15E, attachments are quoted separately once the base chassis is fixed.
Capacity above the rated lift height follows the mast curve.
On the LEP-15E, the signed datasheet issued with the quotation is the binding version.
The specification sheet is the binding reference for listed values.
On the LEP-15E, packing follows sea-freight practice for the chosen chassis.
The enquiry should include the quantity and destination port.
On the LEP-15E, the operation and parts material travel with the machine.
Documents issued for an order are listed in the quotation.
Ask for the specific certificate required for your target country.
The operation material covers controls, checks and routine service points.
The serial number identifies the build when parts are ordered later.
Questions
The listed power arrangement is 205 kg. Confirm the supply voltage or fuel type for your site before ordering.
The listed turning radius is 1475. Aisle width also depends on pallet depth and fork length.
The listed service or net weight is 205 kg. This matters for floor loading, ramps and container plans.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.