Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

CPCD35 — diesel counterbalance forklift

CPCD35 Diesel Forklift. Diesel counterbalance trucks suit gravel, asphalt or packed earth.

CPCD35 diesel counterbalance forklift — product photo 1 of 3

Ordering facts for the CPCD35

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

CPCD35 specification

The source record did not publish a parameter table for this model. The listed figures below are limited to what the record confirms; request the missing parameters through the enquiry form.

Request price Datasheet (print / save as PDF) Ask about fuel type

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

CPCD35 Diesel Forklift, part of the Diesel forklift trucks line.

Counterbalance diesel forklifts for outdoor yards, construction sites and port apron loading.

Outdoor yard loading

This class is specified for outdoor work and standing dust.

Diesel power suits slopes and surfaces where an indoor truck would struggle.

A diesel chassis carries pneumatic tyres and an internal combustion unit.

A diesel chassis carries pneumatic tyres and an internal combustion unit.

Describe the shifts per day when the power arrangement is selected. Check closed mast or chassis height against the lowest door on the route.

Specification walk-through

The published parameters for this build are listed in the specification table.

Items the source record did not publish are shown as an em dash in the table.

Those missing items can be asked for directly through the enquiry form.

Rated figures apply at the standard load centre unless a row says otherwise.

Options and attachments are listed separately from the base chassis.

An em dash marks a value the source record did not publish.

How to specify the right build

Configuration follows the load, working height and site layout.

Dimensions in the table come from the source record.

The listed figures follow the record; options are confirmed on the quotation.

Compare capacity first, then the lift height the job actually needs.

Check the machine weight against floor loading where the site is raised.

Check the chassis width against the aisle and the container door.

List the models that clear each constraint before asking for a quote.

  • State the shifts per day so the power arrangement can be sized properly.
  • Send those figures with the model code; the reply confirms whether the chassis suits.
  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.

Site preparation and operating notes

On the CPCD35, check the lowest door, beam height and aisle the truck has to pass through.

List the attachments required, such as clamps, sideshift or rotator.

On the CPCD35, keep the charging or refuelling position clear of the main traffic aisle.

State the shifts per day so the power arrangement can be sized properly.

On the CPCD35, measure the pallet footprint and the heaviest single load before comparing models.

Operation and routine checks

On the CPCD35, the operator follows the rated capacity marked on the chassis.

Attachments are secured before the machine leaves the station.

On the CPCD35, loads are kept low while travelling between stations.

Routine checks cover tyres, brakes, controls and visible leaks.

How this model fits the operation

On the CPCD35, spare parts for wear items follow the parts manual after delivery.

The layout drawing shows where each machine sits in the operation.

On the CPCD35, the receiving side pairs it with a dock ramp or platform where needed.

Attachments such as clamps or rotators are matched to the load shape.

Working conditions and honest limits

On the CPCD35, the signed datasheet issued with the quotation is the binding version.

Attachments are quoted separately once the base chassis is fixed.

On the CPCD35, any option not listed should be confirmed in writing before order.

Dimensions are checked against the source record before quoting.

Delivery, documents and support

On the CPCD35, packing follows sea-freight practice for the chosen chassis.

Documents issued for an order are listed in the quotation.

On the CPCD35, the booking reference is issued with the proforma invoice.

Wear parts are supplied after delivery against the parts manual.

Test and conformity documents follow the model and destination market.

The parts manual lists the wear items and their reference views.

The operation material covers controls, checks and routine service points.

Before you order

  • The rated load applies at the standard load centre; carrying the load farther forward reduces the figure marked on the chassis plate.
  • Dimensions in the specification come from the source record — check them against the container door, the lowest door on the route and the aisle before ordering.
  • Attachment options are confirmed on the quotation; their weight and width are counted against the residual capacity.
  • The certificate set for an order follows the destination market; ISO factory certificates and the serial list ship with the consignment.
  • Spare parts follow the parts manual supplied with the machine; quote the serial number and component name when ordering wear parts.

Questions

Questions buyers ask before ordering

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Which ports can the machine ship from?+

Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Diesel forklift trucks related models

ModelCapacityLiftPowerTypical use
FD30—3000 mmDieselYard spotting and stacking
LG50—3000 mmDieselOutdoor yard loading
FD20—3000 mm—Construction and site duties
LG45—3000 mmDieselYard spotting and stacking
LG80—3000 mmDieselTimber and bulk stores

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.