ETW2000 Electric lift table, rated capacity 2000Kg. They reduce bending and manual lifting at packing stations and docks.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Unit | ETW2000 | ETW2001 |
|---|---|---|---|
| Model | — | ETW2000 | ETW2001 |
| Load Capacity | kg | 2000 kg | |
| Lowest Height | mm | 360 mm | |
| Max. Height | mm | 1780 mm | |
| Table Dimensions | mm | 1300×850 | 1600×1000 |
| Net Weight | kg | 295 | 325 |
| : * | — | ,! | |
ETW2000 Electric lift table, part of the Lift tables line.
Hydraulic, air-hydraulic and electric lift tables for dock feeding and work positioning.
Dock feeding and packing
Published figures for this build: rated capacity 2000 kg.
Scissor mechanisms carry the load vertically, with hydraulic or electric drive.
Lift tables raise a pallet or work piece to a comfortable height.
Fixed and mobile tables fit production cells, picking and stuffing.
Fixed and mobile tables fit production cells, picking and stuffing.
Note cold store, outdoor gradient or container entry as a constraint. Describe the shifts per day when the power arrangement is selected.
The specification sheet records Model: ETW2000 / ETW2001; Load Capacity (kg): 2000 kg; Lowest Height (mm): 360 mm; Max. Height (mm): 1780 mm; Table Dimensions (mm): 1300×850 / 1600×1000; Net Weight (kg): 295 / 325.
The specification sheet records Specification is not published in the source record; : *: ,!; : * is not published in the source record.
Units are copied as published; convert them only when comparing models.
Options and attachments are listed separately from the base chassis.
Rated figures apply at the standard load centre unless a row says otherwise.
Each row in the table keeps the label and value from the source record.
Configuration follows the load, working height and site layout.
Send pallet size, door height and aisle width with the enquiry.
Measure the pallet footprint before the chassis is shortlisted.
Note any attachment that changes the load centre or the overall width.
Match the power arrangement to the shifts and the working environment.
Compare capacity first, then the lift height the job actually needs.
Check the machine weight against floor loading where the site is raised.
On the ETW2000, send photographs of the racking and the existing working area when possible.
Check headroom under beams, pipes and door frames along the route.
On the ETW2000, check the lowest door, beam height and aisle the truck has to pass through.
Mark the stations where loads are picked up and dropped off each shift.
On the ETW2000, measure the pallet footprint and the heaviest single load before comparing models.
On the ETW2000, battery or fuel levels are checked at the start of each shift.
Attachments are secured before the machine leaves the station.
On the ETW2000, the working area is kept clear of loose packaging and obstacles.
The operator checks load stability before each lift or move.
On the ETW2000, this machine usually works alongside pallet trucks and stacking equipment.
Attachments such as clamps or rotators are matched to the load shape.
On the ETW2000, spare parts for wear items follow the parts manual after delivery.
The layout drawing shows where each machine sits in the operation.
On the ETW2000, tyre choice should match the floor rather than the price list.
Dimensions are checked against the source record before quoting.
On the ETW2000, the signed datasheet issued with the quotation is the binding version.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the ETW2000, the booking reference is issued with the proforma invoice.
Mixed equipment can be listed on one enquiry.
On the ETW2000, the enquiry should include the quantity and destination port.
Loading is recorded before the container is sealed.
Test and conformity documents follow the model and destination market.
The operation material covers controls, checks and routine service points.
Ask for the specific certificate required for your target country.
Questions
The listed rated capacity is 2000Kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.