TF75 TF100 Hydraulic table truc. Table size matches the pallet footprint and the load per cycle.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | TF75 / TF100 |
| Load Capacity | 750 kg / 1000 kg |
| Lowest Height | 410 mm |
| Max. Height | 1000 mm |
| Table Dimensions | 1000×512×55 mm |
| Total Length | 1350 mm |
| Length of Handle | 970 mm |
| Net Weight | 107 / 113 kg |
TF75 TF100 Hydraulic table truc, part of the Lift tables line.
Hydraulic, air-hydraulic and electric lift tables for dock feeding and work positioning.
Hydraulic pallet raising
Published figures for this build: rated capacity 750 kg / 1000 kg.
Fixed and mobile tables fit production cells, picking and stuffing.
Scissor mechanisms carry the load vertically, with hydraulic or electric drive.
Scissor mechanisms carry the load vertically, with hydraulic or electric drive.
Lift tables raise a pallet or work piece to a comfortable height.
State any attachment required alongside the base model. Confirm the aisle width against the pallet depth before choosing a chassis.
The specification sheet records Model: TF75 / TF100; Load Capacity (kg): 750 kg / 1000 kg; Lowest Height (mm): 410 mm; Max. Height (mm): 1000 mm; Table Dimensions (mm): 1000×512×55 mm; Total Length (mm): 1350 mm.
The specification sheet records Length of Handle (mm): 970 mm; Net Weight (kg): 107 / 113 kg.
Rated figures apply at the standard load centre unless a row says otherwise.
Units are copied as published; convert them only when comparing models.
Those missing values can be requested directly through the enquiry form.
Options and attachments are listed separately from the base chassis.
Configuration follows the load, working height and site layout.
The enquiry should list any attachment the job requires.
Door and beam heights decide which mast will clear the route.
Review the tyre type against the surface the machine will run on.
Compare the lowered height against the lowest door on the route.
Compare capacity first, then the lift height the job actually needs.
Check the chassis width against the aisle and the container door.
On the TF75 TF100, keep the charging or refuelling position clear of the main traffic aisle.
Check headroom under beams, pipes and door frames along the route.
On the TF75 TF100, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
Mark the stations where loads are picked up and dropped off each shift.
On the TF75 TF100, state the shifts per day so the power arrangement can be sized properly.
On the TF75 TF100, loads are kept low while travelling between stations.
The operator follows the rated capacity marked on the chassis.
On the TF75 TF100, routine checks cover tyres, brakes, controls and visible leaks.
The operator checks load stability before each lift or move.
On the TF75 TF100, storage cages and racking organise the loads it moves between stations.
Attachments such as clamps or rotators are matched to the load shape.
On the TF75 TF100, spare parts for wear items follow the parts manual after delivery.
The layout drawing shows where each machine sits in the operation.
On the TF75 TF100, attachments are quoted separately once the base chassis is fixed.
The specification sheet is the binding reference for listed values.
On the TF75 TF100, capacity above the rated lift height follows the mast curve.
The signed datasheet issued with the quotation is the binding version.
On the TF75 TF100, mixed equipment can be listed on one enquiry.
Quote the serial number and component name when ordering spares.
On the TF75 TF100, loading is recorded before the container is sealed.
Wear parts are supplied after delivery against the parts manual.
Test and conformity documents follow the model and destination market.
The serial number identifies the build when parts are ordered later.
The parts manual lists the wear items and their reference views.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.