TF10 Hydraulic table truc, rated capacity 100Kg. Fixed and mobile tables fit production cells, picking and stuffing.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | TF10 |
| Load Capacity | 100 kg |
| Lowest Height | 270/330 mm |
| Max. Height | 1260 mm |
| Table Dimensions | 700×450×35 mm |
| Total Length | 940 mm |
| Length of Handle | 875 mm |
| Net Weight | 54 kg |
TF10 Hydraulic table truc, part of the Lift tables line.
Hydraulic, air-hydraulic and electric lift tables for dock feeding and work positioning.
Work positioning at height
Published figures for this build: rated capacity 100 kg.
Table size matches the pallet footprint and the load per cycle.
Table size matches the pallet footprint and the load per cycle.
Lowered height decides how a pallet can be driven onto the deck.
Fixed and mobile tables fit production cells, picking and stuffing.
Compare rated capacity against the heaviest single load you move. Match the tyre type to the floor surface rather than the price list.
The specification sheet records Model: TF10; Load Capacity (kg): 100 kg; Lowest Height (mm): 270/330 mm; Max. Height (mm): 1260 mm; Table Dimensions (mm): 700×450×35 mm; Total Length (mm): 940 mm.
The specification sheet records Length of Handle (mm): 875 mm; Net Weight (kg): 54 kg.
Each row in the table keeps the label and value from the source record.
An em dash marks a value the source record did not publish.
Rated figures apply at the standard load centre unless a row says otherwise.
Options and attachments are listed separately from the base chassis.
Configuration follows the load, working height and site layout.
Dimensions in the table come from the source record.
The listed figures follow the record; options are confirmed on the quotation.
Review the tyre type against the surface the machine will run on.
List the models that clear each constraint before asking for a quote.
Check the chassis width against the aisle and the container door.
Compare capacity first, then the lift height the job actually needs.
On the TF10, check the lowest door, beam height and aisle the truck has to pass through.
Note any slope, threshold or step along the working route.
On the TF10, state the shifts per day so the power arrangement can be sized properly.
Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the TF10, send photographs of the racking and the existing working area when possible.
On the TF10, the working area is kept clear of loose packaging and obstacles.
Unusual noise or movement is reported before further use.
On the TF10, the operator checks load stability before each lift or move.
Battery or fuel levels are checked at the start of each shift.
On the TF10, the receiving side pairs it with a dock ramp or platform where needed.
A mixed enquiry can list this model together with other families.
On the TF10, attachments such as clamps or rotators are matched to the load shape.
Storage cages and racking organise the loads it moves between stations.
On the TF10, attachments are quoted separately once the base chassis is fixed.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the TF10, capacity above the rated lift height follows the mast curve.
Any option not listed should be confirmed in writing before order.
On the TF10, packing follows sea-freight practice for the chosen chassis.
The operation and parts material travel with the machine.
On the TF10, the enquiry should include the quantity and destination port.
Quotations follow the model, listed specification and destination port.
Ask for the specific certificate required for your target country.
Test and conformity documents follow the model and destination market.
The serial number identifies the build when parts are ordered later.
Questions
The listed rated capacity is 100Kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
The listed service or net weight is 54 kg. This matters for floor loading, ramps and container plans.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.