TF30 TF50 Hydraulic table truc. They reduce bending and manual lifting at packing stations and docks.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | TF30 / TF50 |
| Load Capacity | 300 kg / 500 kg |
| Lowest Height | 270/380 / 280/390 mm |
| Max. Height | 900 mm |
| Table Dimensions | 820×500×50 mm |
| Total Length | 1070 mm |
| Length of Handle | 970 mm |
| Net Weight | 65 / 75 kg |
Gallery
All detail images published for this model.

TF30 TF50 Hydraulic table truc, part of the Lift tables line.
Hydraulic, air-hydraulic and electric lift tables for dock feeding and work positioning.
Production cell feeding
Published figures for this build: rated capacity 300 kg / 500 kg.
Fixed and mobile tables fit production cells, picking and stuffing.
Fixed and mobile tables fit production cells, picking and stuffing.
Lowered height decides how a pallet can be driven onto the deck.
Fixed and mobile tables fit production cells, picking and stuffing.
Note cold store, outdoor gradient or container entry as a constraint. State any attachment required alongside the base model.
The specification sheet records Model: TF30 / TF50; Load Capacity (kg): 300 kg / 500 kg; Lowest Height (mm): 270/380 / 280/390 mm; Max. Height (mm): 900 mm; Table Dimensions (mm): 820×500×50 mm; Total Length (mm): 1070 mm.
The specification sheet records Length of Handle (mm): 970 mm; Net Weight (kg): 65 / 75 kg.
Those missing values can be requested directly through the enquiry form.
Rated figures apply at the standard load centre unless a row says otherwise.
An em dash marks a value the source record did not publish.
Options and attachments are listed separately from the base chassis.
Configuration follows the load, working height and site layout.
Door and beam heights decide which mast will clear the route.
Dimensions in the table come from the source record.
Match the power arrangement to the shifts and the working environment.
Check the chassis width against the aisle and the container door.
Compare the lowered height against the lowest door on the route.
Note any attachment that changes the load centre or the overall width.
On the TF30 TF50, send photographs of the racking and the existing working area when possible.
Note any slope, threshold or step along the working route.
On the TF30 TF50, mark the stations where loads are picked up and dropped off each shift.
Keep the charging or refuelling position clear of the main traffic aisle.
On the TF30 TF50, list the attachments required, such as clamps, sideshift or rotator.
On the TF30 TF50, unusual noise or movement is reported before further use.
The working area is kept clear of loose packaging and obstacles.
On the TF30 TF50, battery or fuel levels are checked at the start of each shift.
The operator follows the rated capacity marked on the chassis.
On the TF30 TF50, attachments such as clamps or rotators are matched to the load shape.
Storage cages and racking organise the loads it moves between stations.
On the TF30 TF50, the layout drawing shows where each machine sits in the operation.
Spare parts for wear items follow the parts manual after delivery.
On the TF30 TF50, site conditions such as gradient, dust and moisture belong in the enquiry.
The specification sheet is the binding reference for listed values.
On the TF30 TF50, the signed datasheet issued with the quotation is the binding version.
Capacity above the rated lift height follows the mast curve.
On the TF30 TF50, wear parts are supplied after delivery against the parts manual.
Quote the serial number and component name when ordering spares.
On the TF30 TF50, packing follows sea-freight practice for the chosen chassis.
Quotations follow the model, listed specification and destination port.
The parts manual lists the wear items and their reference views.
Ask for the specific certificate required for your target country.
The operation material covers controls, checks and routine service points.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.