TF15 TF15A Hydraulic table truc, rated capacity 150Kg. Lift tables raise a pallet or work piece to a comfortable height.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Unit | TF15 | TF15A |
|---|---|---|---|
| Model | — | TF15 | TF15A |
| Load Capacity | kg | 150 kg | |
| Lowest Height | mm | 210/330 / 210 mm | |
| Max. Height | mm | 730 mm | |
| Table Dimensions | mm | 700×400×35 mm | |
| Total Length | mm | 900 | 880 |
| Length of Handle | mm | 875 | 890 |
| Net Weight | kg | 41 | 43 |
TF15 TF15A Hydraulic table truc, part of the Lift tables line.
Hydraulic, air-hydraulic and electric lift tables for dock feeding and work positioning.
Press and bench lifting
Published figures for this build: rated capacity 150 kg.
Table size matches the pallet footprint and the load per cycle.
Fixed and mobile tables fit production cells, picking and stuffing.
Fixed and mobile tables fit production cells, picking and stuffing.
Scissor mechanisms carry the load vertically, with hydraulic or electric drive.
Note cold store, outdoor gradient or container entry as a constraint. Match the tyre type to the floor surface rather than the price list.
The specification sheet records Model: TF15 / TF15A; Load Capacity (kg): 150 kg; Lowest Height (mm): 210/330 / 210 mm; Max. Height (mm): 730 mm; Table Dimensions (mm): 700×400×35 mm; Total Length (mm): 900 / 880.
The specification sheet records Length of Handle (mm): 875 / 890; Net Weight (kg): 41 / 43.
Rated figures apply at the standard load centre unless a row says otherwise.
Units are copied as published; convert them only when comparing models.
Options and attachments are listed separately from the base chassis.
Each row in the table keeps the label and value from the source record.
Configuration follows the load, working height and site layout.
Measure the pallet footprint before the chassis is shortlisted.
Send pallet size, door height and aisle width with the enquiry.
Check the chassis width against the aisle and the container door.
Note any attachment that changes the load centre or the overall width.
List the models that clear each constraint before asking for a quote.
Match the power arrangement to the shifts and the working environment.
On the TF15 TF15A, state the shifts per day so the power arrangement can be sized properly.
List the attachments required, such as clamps, sideshift or rotator.
On the TF15 TF15A, check headroom under beams, pipes and door frames along the route.
Mark the stations where loads are picked up and dropped off each shift.
On the TF15 TF15A, check the lowest door, beam height and aisle the truck has to pass through.
On the TF15 TF15A, the operator checks load stability before each lift or move.
Routine checks cover tyres, brakes, controls and visible leaks.
On the TF15 TF15A, battery or fuel levels are checked at the start of each shift.
Attachments are secured before the machine leaves the station.
On the TF15 TF15A, spare parts for wear items follow the parts manual after delivery.
The receiving side pairs it with a dock ramp or platform where needed.
On the TF15 TF15A, the layout drawing shows where each machine sits in the operation.
This machine usually works alongside pallet trucks and stacking equipment.
On the TF15 TF15A, the signed datasheet issued with the quotation is the binding version.
Attachments are quoted separately once the base chassis is fixed.
On the TF15 TF15A, capacity above the rated lift height follows the mast curve.
Dimensions are checked against the source record before quoting.
On the TF15 TF15A, wear parts are supplied after delivery against the parts manual.
Packing follows sea-freight practice for the chosen chassis.
On the TF15 TF15A, the enquiry should include the quantity and destination port.
Documents issued for an order are listed in the quotation.
The operation material covers controls, checks and routine service points.
Test and conformity documents follow the model and destination market.
The parts manual lists the wear items and their reference views.
Questions
The listed rated capacity is 150Kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.