Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

TF35D — lift table

TF35D Hydraulic table truc, rated capacity 350Kg. Fixed and mobile tables fit production cells, picking and stuffing.

TF35D lift table — product photo 1 of 1

Ordering facts for the TF35D

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

TF35D specification

Values are copied from the source record in their original order and units.

TF35D specification table
ParameterValue
ModelTF35D
Load Capacity350 kg
Lowest Height345/395 mm
Max. Height1300 mm
Table Dimensions905×512×55 mm
Total Length1170 mm
Length of Handle970 mm
Net Weight103 kg
Request price Datasheet (print / save as PDF) Ask about configuration

What this model is built to do

TF35D Hydraulic table truc, part of the Lift tables line.

Hydraulic, air-hydraulic and electric lift tables for dock feeding and work positioning.

Ergonomic load positioning

Published figures for this build: rated capacity 350 kg.

Fixed and mobile tables fit production cells, picking and stuffing.

Lift tables raise a pallet or work piece to a comfortable height.

Scissor mechanisms carry the load vertically, with hydraulic or electric drive.

Lowered height decides how a pallet can be driven onto the deck.

Note cold store, outdoor gradient or container entry as a constraint. Check closed mast or chassis height against the lowest door on the route.

Specification walk-through

The specification sheet records Model: TF35D; Load Capacity (kg): 350 kg; Lowest Height (mm): 345/395 mm; Max. Height (mm): 1300 mm; Table Dimensions (mm): 905×512×55 mm; Total Length (mm): 1170 mm.

The specification sheet records Length of Handle (mm): 970 mm; Net Weight (kg): 103 kg.

Those missing values can be requested directly through the enquiry form.

Each row in the table keeps the label and value from the source record.

An em dash marks a value the source record did not publish.

Options and attachments are listed separately from the base chassis.

How to specify the right build

Configuration follows the load, working height and site layout.

Dimensions in the table come from the source record.

The enquiry should list any attachment the job requires.

Review the tyre type against the surface the machine will run on.

Compare capacity first, then the lift height the job actually needs.

Check the chassis width against the aisle and the container door.

Match the power arrangement to the shifts and the working environment.

  • Mark the stations where loads are picked up and dropped off each shift.
  • Send those figures with the model code; the reply confirms whether the chassis suits.
  • List attachments such as clamps, sideshift or rotator separately.

Site preparation and operating notes

On the TF35D, measure the pallet footprint and the heaviest single load before comparing models.

Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.

On the TF35D, check the lowest door, beam height and aisle the truck has to pass through.

Check headroom under beams, pipes and door frames along the route.

On the TF35D, note any slope, threshold or step along the working route.

Operation and routine checks

On the TF35D, the operator checks load stability before each lift or move.

Loads are kept low while travelling between stations.

On the TF35D, the working area is kept clear of loose packaging and obstacles.

The operator follows the rated capacity marked on the chassis.

How this model fits the operation

On the TF35D, related models in the same group are listed on the family page.

Storage cages and racking organise the loads it moves between stations.

On the TF35D, this machine usually works alongside pallet trucks and stacking equipment.

A mixed enquiry can list this model together with other families.

Working conditions and honest limits

On the TF35D, the specification sheet is the binding reference for listed values.

Dimensions are checked against the source record before quoting.

On the TF35D, tyre choice should match the floor rather than the price list.

Any option not listed should be confirmed in writing before order.

Delivery, documents and support

On the TF35D, wear parts are supplied after delivery against the parts manual.

The booking reference is issued with the proforma invoice.

On the TF35D, loading is recorded before the container is sealed.

The enquiry should include the quantity and destination port.

The operation material covers controls, checks and routine service points.

The serial number identifies the build when parts are ordered later.

The parts manual lists the wear items and their reference views.

Before you order

  • Capacity shown is the rated figure at the stated load centre; above the rated lift height the capacity follows the mast curve.
  • Check overall width and turning space against the aisle and any narrow doorway before the chassis is shortlisted.
  • Any clamp, sideshift or rotator changes the load centre and must be listed alongside the base model.
  • CE or GS documentation where applicable is listed in the quotation together with the factory quality certificates.
  • Spare parts follow the parts manual supplied with the machine; quote the serial number and component name when ordering wear parts.

Questions

Questions buyers ask before ordering

What load does the TF35D carry?+

The listed rated capacity is 350Kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.

What is the machine weight?+

The listed service or net weight is 103 kg. This matters for floor loading, ramps and container plans.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Lift tables related models

ModelCapacityLiftPowerTypical use
TF15150——Press and bench lifting
TF30———Production cell feeding
TF75———Hydraulic pallet raising
TF10100——Work positioning at height
TF30F———Production cell feeding

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.