WSG-40/15 / WSG-60/15 / WSG-80/15 New Product. Selection starts from the load per move and the space around it.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | WSG-40/15 / WSG-60/15 / WSG-80/15 |
| Capacity | / 500(kg) / 800(kg) |
| No. of Suction cup | 4 / 6 / 8 |
| Side shifter of distance | 100/100mm(each100mm) |
| Up/down rotate | 90°(From vertical to Horizontal) |
| Flat surface Rotate | 360° |
| Cylinder | 1/1 |
| Width of suck frame | 930 * 1500(mm) |
| Hydraulic motor | DC24V/1600W / DC24V/2000W |
| Driving motor | DC24V/500W / DC24V/700W / DC24V/1000W |
| Battery | 2X12V/55Ah / 2X12V/70Ah / 2X12V/100Ah |
| Charger | DC24V/10Ah / DC24V/15Ah |
| Speed controller | stepless speed controller / Electric controller |
| Walking speed | 0~6.5 |
| Self weight | -- |
Gallery
All detail images published for this model.









WSG-40/15 / WSG-60/15 / WSG-80/15 New Product, part of the Special-purpose handling equipment line.
Hand trucks and trolleys, stair-climbing carts, paper-roll and coil clamps, forklift attachments, jacks and other auxiliary tools that do not fit the powered-vehicle families.
General handling
Published figures for this build: rated capacity / 500(kg) / 800(kg).
Selection starts from the load per move and the space around it.
This item belongs to the broader SUNRISE material handling catalogue.
Each build is quoted line by line once the duty cycle is confirmed.
The machine is specified against the load, floor and working height.
Check closed mast or chassis height against the lowest door on the route. State any attachment required alongside the base model.
The specification sheet records Model: WSG-40/15 / WSG-60/15 / WSG-80/15; Capacity (kg): / 500(kg) / 800(kg); Lifting height (mm) is not published in the source record; No. of Suction cup: 4 / 6 / 8; Side shifter of distance: 100/100mm(each100mm); Up/down rotate: 90°(From vertical to Horizontal).
The specification sheet records Flat surface Rotate: 360°; Cylinder: 1/1; Height of mast (mm) is not published in the source record; Width of suck frame: 930 * 1500(mm); Length (mm) is not published in the source record; Hydraulic motor: DC24V/1600W / DC24V/2000W.
The specification sheet records Driving motor: DC24V/500W / DC24V/700W / DC24V/1000W; Battery: 2X12V/55Ah / 2X12V/70Ah / 2X12V/100Ah; Charger: DC24V/10Ah / DC24V/15Ah; Speed controller: stepless speed controller / Electric controller; Walking speed (km/h): 0~6.5; Self weight (Kg): --.
An em dash marks a value the source record did not publish.
Those missing values can be requested directly through the enquiry form.
Options and attachments are listed separately from the base chassis.
Each row in the table keeps the label and value from the source record.
Configuration follows the load, working height and site layout.
Send pallet size, door height and aisle width with the enquiry.
Door and beam heights decide which mast will clear the route.
List the models that clear each constraint before asking for a quote.
Check the machine weight against floor loading where the site is raised.
Check the chassis width against the aisle and the container door.
Review the tyre type against the surface the machine will run on.
On the WSG-40/15 / WSG-60/15 / WSG-80/15, note any slope, threshold or step along the working route.
Mark the stations where loads are picked up and dropped off each shift.
On the WSG-40/15 / WSG-60/15 / WSG-80/15, list the attachments required, such as clamps, sideshift or rotator.
Send photographs of the racking and the existing working area when possible.
On the WSG-40/15 / WSG-60/15 / WSG-80/15, state the shifts per day so the power arrangement can be sized properly.
On the WSG-40/15 / WSG-60/15 / WSG-80/15, routine checks cover tyres, brakes, controls and visible leaks.
The operator follows the rated capacity marked on the chassis.
On the WSG-40/15 / WSG-60/15 / WSG-80/15, the working area is kept clear of loose packaging and obstacles.
Loads are kept low while travelling between stations.
On the WSG-40/15 / WSG-60/15 / WSG-80/15, related models in the same group are listed on the family page.
The receiving side pairs it with a dock ramp or platform where needed.
On the WSG-40/15 / WSG-60/15 / WSG-80/15, a mixed enquiry can list this model together with other families.
Attachments such as clamps or rotators are matched to the load shape.
On the WSG-40/15 / WSG-60/15 / WSG-80/15, site conditions such as gradient, dust and moisture belong in the enquiry.
Dimensions are checked against the source record before quoting.
On the WSG-40/15 / WSG-60/15 / WSG-80/15, tyre choice should match the floor rather than the price list.
The specification sheet is the binding reference for listed values.
On the WSG-40/15 / WSG-60/15 / WSG-80/15, the operation and parts material travel with the machine.
Packing follows sea-freight practice for the chosen chassis.
On the WSG-40/15 / WSG-60/15 / WSG-80/15, loading is recorded before the container is sealed.
The enquiry should include the quantity and destination port.
The parts manual lists the wear items and their reference views.
The operation material covers controls, checks and routine service points.
Ask for the specific certificate required for your target country.
Questions
The listed service or net weight is --. This matters for floor loading, ramps and container plans.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Special-purpose handling equipment related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.