WP-130RT Electric Pallet Truck, rated capacity 1300kg. Powered versions reduce walking distance on long warehouse runs.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | WP-130RT |
| Capacity | 1300 kg |
| Adjustable fork width | 8" to 33" |
| Lifting height | 11.8" / 0.3m |
| Hydraulic power pack | DC24V/1300W |
| Battery | 2*12V/100Ah |
| Charger | 15A |
| Drive wheel | DC24V/1200W |
| Width | 63" / 1602 |
| Length | 63" / 1605 |
| Height | 51" / 1290 |
| Weight | 630kgs |
Gallery
All detail images published for this model.


WP-130RT Electric Pallet Truck, part of the Pallet trucks line.
Hand, semi-electric and powered pallet trucks for horizontal pallet transport.
Container pallet stripping
Published figures for this build: rated capacity 1300 kg.
Powered versions reduce walking distance on long warehouse runs.
Hand versions keep a simple hydraulic pump for short repeated moves.
Short floor transport between dock and store is the usual duty.
Hand versions keep a simple hydraulic pump for short repeated moves.
Confirm the charger voltage or fuel type for your destination country. Compare rated capacity against the heaviest single load you move.
The specification sheet records Model: WP-130RT; Capacity (kg): 1300 kg; Adjustable fork width: 8" to 33"; Lifting height: 11.8" / 0.3m; Hydraulic power pack: DC24V/1300W; Battery: 2*12V/100Ah.
The specification sheet records Charger: 15A; Drive wheel: DC24V/1200W; Width: 63" / 1602; Length: 63" / 1605; Height: 51" / 1290; Weight: 630kgs.
Those missing values can be requested directly through the enquiry form.
Each row in the table keeps the label and value from the source record.
Options and attachments are listed separately from the base chassis.
Rated figures apply at the standard load centre unless a row says otherwise.
Configuration follows the load, working height and site layout.
Measure the pallet footprint before the chassis is shortlisted.
Send pallet size, door height and aisle width with the enquiry.
Note any attachment that changes the load centre or the overall width.
Compare capacity first, then the lift height the job actually needs.
List the models that clear each constraint before asking for a quote.
Review the tyre type against the surface the machine will run on.
On the WP-130RT, keep the charging or refuelling position clear of the main traffic aisle.
State the shifts per day so the power arrangement can be sized properly.
On the WP-130RT, check headroom under beams, pipes and door frames along the route.
Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the WP-130RT, mark the stations where loads are picked up and dropped off each shift.
On the WP-130RT, the operator checks load stability before each lift or move.
Battery or fuel levels are checked at the start of each shift.
On the WP-130RT, unusual noise or movement is reported before further use.
Attachments are secured before the machine leaves the station.
On the WP-130RT, spare parts for wear items follow the parts manual after delivery.
Related models in the same group are listed on the family page.
On the WP-130RT, attachments such as clamps or rotators are matched to the load shape.
Storage cages and racking organise the loads it moves between stations.
On the WP-130RT, capacity above the rated lift height follows the mast curve.
Dimensions are checked against the source record before quoting.
On the WP-130RT, any option not listed should be confirmed in writing before order.
Tyre choice should match the floor rather than the price list.
On the WP-130RT, the operation and parts material travel with the machine.
The enquiry should include the quantity and destination port.
On the WP-130RT, loading is recorded before the container is sealed.
Wear parts are supplied after delivery against the parts manual.
The operation material covers controls, checks and routine service points.
Ask for the specific certificate required for your target country.
The parts manual lists the wear items and their reference views.
Questions
The listed rated capacity is 1300kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
The listed service or net weight is 630kgs. This matters for floor loading, ramps and container plans.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.