WP-100RT Electric Pallet Truck, rated capacity 1000kg. Hand and powered pallet trucks are the first dock unloading tool.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | WP-100RT |
| Capacity | 1000 kg |
| Adjustable fork width | 8" to 33" |
| Lifting height | 11.8" / 0.3m |
| Hydraulic power pack | DC24V/800W |
| Battery | 2*12V/70Ah |
| Charger | 15A |
| Drive wheel | DC24V/800W |
| Width | 63" / 1611mm |
| Length | 45" / 1145mm |
| Height | 51" / 1295mm |
| Weight | 565kgs |
WP-100RT Electric Pallet Truck, part of the Pallet trucks line.
Hand, semi-electric and powered pallet trucks for horizontal pallet transport.
Container pallet stripping
Published figures for this build: rated capacity 1000 kg.
Pallet trucks move palletised loads across a floor or into a container.
The chassis stays low, so forks slide under a standard pallet.
Hand versions keep a simple hydraulic pump for short repeated moves.
Powered versions reduce walking distance on long warehouse runs.
Note cold store, outdoor gradient or container entry as a constraint. Confirm the charger voltage or fuel type for your destination country.
The specification sheet records Model: WP-100RT; Capacity (kg): 1000 kg; Adjustable fork width: 8" to 33"; Lifting height: 11.8" / 0.3m; Hydraulic power pack: DC24V/800W; Battery: 2*12V/70Ah.
The specification sheet records Charger: 15A; Drive wheel: DC24V/800W; Width: 63" / 1611mm; Length: 45" / 1145mm; Height: 51" / 1295mm; Weight: 565kgs.
Options and attachments are listed separately from the base chassis.
Rated figures apply at the standard load centre unless a row says otherwise.
Each row in the table keeps the label and value from the source record.
Units are copied as published; convert them only when comparing models.
Configuration follows the load, working height and site layout.
The enquiry should list any attachment the job requires.
Dimensions in the table come from the source record.
Compare capacity first, then the lift height the job actually needs.
List the models that clear each constraint before asking for a quote.
Compare the lowered height against the lowest door on the route.
Check the machine weight against floor loading where the site is raised.
On the WP-100RT, send photographs of the racking and the existing working area when possible.
Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the WP-100RT, note any slope, threshold or step along the working route.
State the shifts per day so the power arrangement can be sized properly.
On the WP-100RT, list the attachments required, such as clamps, sideshift or rotator.
On the WP-100RT, routine checks cover tyres, brakes, controls and visible leaks.
The operator follows the rated capacity marked on the chassis.
On the WP-100RT, unusual noise or movement is reported before further use.
Loads are kept low while travelling between stations.
On the WP-100RT, this machine usually works alongside pallet trucks and stacking equipment.
Attachments such as clamps or rotators are matched to the load shape.
On the WP-100RT, a mixed enquiry can list this model together with other families.
Spare parts for wear items follow the parts manual after delivery.
On the WP-100RT, the specification sheet is the binding reference for listed values.
Tyre choice should match the floor rather than the price list.
On the WP-100RT, dimensions are checked against the source record before quoting.
The signed datasheet issued with the quotation is the binding version.
On the WP-100RT, documents issued for an order are listed in the quotation.
The operation and parts material travel with the machine.
On the WP-100RT, the booking reference is issued with the proforma invoice.
Packing follows sea-freight practice for the chosen chassis.
Ask for the specific certificate required for your target country.
The parts manual lists the wear items and their reference views.
The serial number identifies the build when parts are ordered later.
Questions
The listed rated capacity is 1000kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
The listed service or net weight is 565kgs. This matters for floor loading, ramps and container plans.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.