WIRE-MESH Wire Mesh Container. Systems are drawn to building dimensions before any truck is ordered.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| A series | A-1 / 800*600*640 / 50*50 / 6 / 29 / 800 |
| SA-1 | 5.8 / 27.7 / 600 |
| A5.3 | 5.5 / 23.2 / 400 |
| A4.8 | 5 / 20.8 / 300 |
| B series | B-1 / 1000*800*840 / 50*50 / 6 / 44.6 / 1000 |
| SB-1 | 5.8 / 42.8 / 800 |
| B5.3 | 5.5 / 35.6 / 600 |
| B4.8 | 5 / 31 / 500 |
| C series | C-1 / 1200*1000*890 / 50*50 / 6 / 60.8 / 1500 |
| SC-1 | 5.8 / 55.6 / 1200 |
| C-2 | 50*100 / 6 / 53.4 / 1000 |
| SC-2 | 5.8 / 48.4 / 800 |
Gallery
All detail images published for this model.



WIRE-MESH Wire Mesh Container, part of the Storage systems line.
Racking, wire mesh containers, pallets and decking for pallet and bulk-goods storage.
Carton shelving storage
Systems are drawn to building dimensions before any truck is ordered.
Racking and systems organise pallet and carton positions inside a warehouse.
The storage layout sets the aisle width the truck must enter.
Racking and systems organise pallet and carton positions inside a warehouse.
Match the tyre type to the floor surface rather than the price list. Describe the shifts per day when the power arrangement is selected.
The specification sheet records A series: A-1 / 800*600*640 / 50*50 / 6 / 29 / 800; SA-1: 5.8 / 27.7 / 600; A5.3: 5.5 / 23.2 / 400; A4.8: 5 / 20.8 / 300; B series: B-1 / 1000*800*840 / 50*50 / 6 / 44.6 / 1000; SB-1: 5.8 / 42.8 / 800.
The specification sheet records B5.3: 5.5 / 35.6 / 600; B4.8: 5 / 31 / 500; C series: C-1 / 1200*1000*890 / 50*50 / 6 / 60.8 / 1500; SC-1: 5.8 / 55.6 / 1200; C-2: 50*100 / 6 / 53.4 / 1000; SC-2: 5.8 / 48.4 / 800.
An em dash marks a value the source record did not publish.
Those missing values can be requested directly through the enquiry form.
Options and attachments are listed separately from the base chassis.
Each row in the table keeps the label and value from the source record.
Configuration follows the load, working height and site layout.
Send pallet size, door height and aisle width with the enquiry.
Door and beam heights decide which mast will clear the route.
Review the tyre type against the surface the machine will run on.
List the models that clear each constraint before asking for a quote.
Compare the lowered height against the lowest door on the route.
Match the power arrangement to the shifts and the working environment.
On the WIRE-MESH, measure the pallet footprint and the heaviest single load before comparing models.
Check headroom under beams, pipes and door frames along the route.
On the WIRE-MESH, mark the stations where loads are picked up and dropped off each shift.
List the attachments required, such as clamps, sideshift or rotator.
On the WIRE-MESH, send photographs of the racking and the existing working area when possible.
On the WIRE-MESH, attachments are secured before the machine leaves the station.
Unusual noise or movement is reported before further use.
On the WIRE-MESH, the operator checks load stability before each lift or move.
Battery or fuel levels are checked at the start of each shift.
On the WIRE-MESH, storage cages and racking organise the loads it moves between stations.
The layout drawing shows where each machine sits in the operation.
On the WIRE-MESH, this machine usually works alongside pallet trucks and stacking equipment.
A mixed enquiry can list this model together with other families.
On the WIRE-MESH, site conditions such as gradient, dust and moisture belong in the enquiry.
The signed datasheet issued with the quotation is the binding version.
On the WIRE-MESH, attachments are quoted separately once the base chassis is fixed.
Tyre choice should match the floor rather than the price list.
On the WIRE-MESH, the booking reference is issued with the proforma invoice.
Loading is recorded before the container is sealed.
On the WIRE-MESH, packing follows sea-freight practice for the chosen chassis.
Quotations follow the model, listed specification and destination port.
Test and conformity documents follow the model and destination market.
Ask for the specific certificate required for your target country.
The serial number identifies the build when parts are ordered later.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.