Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

Wire decking for rack use — storage system

Wire decking for rack use Wire decking for rack use, rated capacity 500-2000 kg. Beam, shelving and cage layouts follow pallet size and aisle height.

Wire decking for rack use storage system — product photo 1 of 12

Ordering facts for the Wire decking for rack use

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

Wire decking for rack use specification

Values are copied from the source record in their original order and units.

Wire decking for rack use specification table
ParameterValue
Product NameHeavy Duty Steel Wire Mesh Deck Panel
MaterialSteel wire
Loading Capacity500-2000 kg
Wire Mesh Size36''*46'',42''*46'',48''*46'',36''*58'',42''*58'',48''*58''
Grid Size50*50mm,50*100mm,100*100mm
Diameter3.0mm, 4.0mm, 5.0mm
Surface TreatmentElectro Galvanized(trivalent chromium)
MOQ10 pcs
CertificateCE,ISO,SGS,AS 4084
PaymentLC,TT,Western Union,Paypal are available
Packing DetailsStandard export seaworthy packing
Request price Datasheet (print / save as PDF) Ask about configuration

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

Wire decking for rack use Wire decking for rack use, part of the Storage systems line.

Racking, wire mesh containers, pallets and decking for pallet and bulk-goods storage.

Pallet and bulk storage

Published figures for this build: rated capacity 500-2000 kg.

Systems are drawn to building dimensions before any truck is ordered.

Load beams are spaced to the pallet depth and stacking height.

Access floor space and column lines are checked against the design.

Beam, shelving and cage layouts follow pallet size and aisle height.

Confirm the charger voltage or fuel type for your destination country. Note cold store, outdoor gradient or container entry as a constraint.

Specification walk-through

The specification sheet records Product Name: Heavy Duty Steel Wire Mesh Deck Panel; Material: Steel wire; Loading Capacity (kg): 500-2000 kg; Wire Mesh Size: 36''*46'',42''*46'',48''*46'',36''*58'',42''*58'',48''*58''; Grid Size: 50*50mm,50*100mm,100*100mm; Diameter: 3.0mm, 4.0mm, 5.0mm.

The specification sheet records Surface Treatment: Electro Galvanized(trivalent chromium); MOQ: 10 pcs; Certificate: CE,ISO,SGS,AS 4084; Payment: LC,TT,Western Union,Paypal are available; Packing Details: Standard export seaworthy packing.

Units are copied as published; convert them only when comparing models.

Rated figures apply at the standard load centre unless a row says otherwise.

Each row in the table keeps the label and value from the source record.

Those missing values can be requested directly through the enquiry form.

How to specify the right build

Configuration follows the load, working height and site layout.

Door and beam heights decide which mast will clear the route.

Dimensions in the table come from the source record.

Check the chassis width against the aisle and the container door.

Compare the lowered height against the lowest door on the route.

Review the tyre type against the surface the machine will run on.

Match the power arrangement to the shifts and the working environment.

  • State the shifts per day so the power arrangement can be sized properly.
  • List the load per move, lift height and floor surface before comparing models.
  • Mark the stations where loads are picked up and dropped off each shift.

Site preparation and operating notes

On the Wire decking for rack use, note any slope, threshold or step along the working route.

Send photographs of the racking and the existing working area when possible.

On the Wire decking for rack use, check headroom under beams, pipes and door frames along the route.

Keep the charging or refuelling position clear of the main traffic aisle.

On the Wire decking for rack use, state the shifts per day so the power arrangement can be sized properly.

Operation and routine checks

On the Wire decking for rack use, battery or fuel levels are checked at the start of each shift.

Loads are kept low while travelling between stations.

On the Wire decking for rack use, the working area is kept clear of loose packaging and obstacles.

Attachments are secured before the machine leaves the station.

How this model fits the operation

On the Wire decking for rack use, the receiving side pairs it with a dock ramp or platform where needed.

Related models in the same group are listed on the family page.

On the Wire decking for rack use, a mixed enquiry can list this model together with other families.

Attachments such as clamps or rotators are matched to the load shape.

Working conditions and honest limits

On the Wire decking for rack use, any option not listed should be confirmed in writing before order.

Site conditions such as gradient, dust and moisture belong in the enquiry.

On the Wire decking for rack use, capacity above the rated lift height follows the mast curve.

Tyre choice should match the floor rather than the price list.

Delivery, documents and support

On the Wire decking for rack use, the operation and parts material travel with the machine.

Loading is recorded before the container is sealed.

On the Wire decking for rack use, the enquiry should include the quantity and destination port.

Mixed equipment can be listed on one enquiry.

Test and conformity documents follow the model and destination market.

The parts manual lists the wear items and their reference views.

Ask for the specific certificate required for your target country.

Before you order

  • Capacity shown is the rated figure at the stated load centre; above the rated lift height the capacity follows the mast curve.
  • Measure the lowered chassis and mast height against the lowest door and the container door on the planned route.
  • Attachments are quoted separately once the base chassis is fixed, so the attachment weight can be counted against the residual capacity.
  • Documents issued with the order: ISO 9001, ISO 14001 and ISO 18001 factory certificates, plus CE or GS where the model carries it, and the serial list for the shipment.
  • Wear parts are ordered after delivery against the parts manual, the serial number and the component name.

Questions

Questions buyers ask before ordering

What load does the Wire decking for rack use carry?+

The listed rated capacity is 500-2000 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Storage systems related models

ModelCapacityLiftPowerTypical use
wire———Pallet and bulk storage
slotted———Returnable goods storage
SRWL***———Returnable goods storage
Heavy———Warehouse stocking
Mid———Racking organisation

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.