TF75S Hydraulic table truc, rated capacity 750Kg. Lift tables raise a pallet or work piece to a comfortable height.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | TF75S |
| Load Capacity | 750 kg |
| Lowest Height | 450 mm |
| Max. Height | 1500 mm |
| Table Dimensions | 1220×610×55 mm |
| Total Length | 1540 mm |
| Length of Handle | 1000 mm |
| Net Weight | 181 kg |
TF75S Hydraulic table truc, part of the Lift tables line.
Hydraulic, air-hydraulic and electric lift tables for dock feeding and work positioning.
Hydraulic pallet raising
Published figures for this build: rated capacity 750 kg.
Lift tables raise a pallet or work piece to a comfortable height.
Lift tables raise a pallet or work piece to a comfortable height.
Lift tables raise a pallet or work piece to a comfortable height.
Lift tables raise a pallet or work piece to a comfortable height.
Check closed mast or chassis height against the lowest door on the route. Confirm the charger voltage or fuel type for your destination country.
The specification sheet records Model: TF75S; Load Capacity (kg): 750 kg; Lowest Height (mm): 450 mm; Max. Height (mm): 1500 mm; Table Dimensions (mm): 1220×610×55 mm; Total Length (mm): 1540 mm.
The specification sheet records Length of Handle (mm): 1000 mm; Net Weight (kg): 181 kg.
An em dash marks a value the source record did not publish.
Units are copied as published; convert them only when comparing models.
Those missing values can be requested directly through the enquiry form.
Each row in the table keeps the label and value from the source record.
Configuration follows the load, working height and site layout.
The listed figures follow the record; options are confirmed on the quotation.
The enquiry should list any attachment the job requires.
Note any attachment that changes the load centre or the overall width.
Review the tyre type against the surface the machine will run on.
List the models that clear each constraint before asking for a quote.
Compare capacity first, then the lift height the job actually needs.
On the TF75S, keep the charging or refuelling position clear of the main traffic aisle.
Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the TF75S, check the lowest door, beam height and aisle the truck has to pass through.
Note any slope, threshold or step along the working route.
On the TF75S, state the shifts per day so the power arrangement can be sized properly.
On the TF75S, unusual noise or movement is reported before further use.
The operator checks load stability before each lift or move.
On the TF75S, the operator follows the rated capacity marked on the chassis.
Battery or fuel levels are checked at the start of each shift.
On the TF75S, this machine usually works alongside pallet trucks and stacking equipment.
Storage cages and racking organise the loads it moves between stations.
On the TF75S, the receiving side pairs it with a dock ramp or platform where needed.
Related models in the same group are listed on the family page.
On the TF75S, any option not listed should be confirmed in writing before order.
Dimensions are checked against the source record before quoting.
On the TF75S, tyre choice should match the floor rather than the price list.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the TF75S, documents issued for an order are listed in the quotation.
Packing follows sea-freight practice for the chosen chassis.
On the TF75S, quotations follow the model, listed specification and destination port.
The enquiry should include the quantity and destination port.
The parts manual lists the wear items and their reference views.
Test and conformity documents follow the model and destination market.
Ask for the specific certificate required for your target country.
Questions
The listed rated capacity is 750Kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
The listed service or net weight is 181 kg. This matters for floor loading, ramps and container plans.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.