TF30R TF50R Hydraulic table truc. Lift tables raise a pallet or work piece to a comfortable height.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | TF30R / TF50R |
| Load Capacity | 300 kg / 500 kg |
| Lowest Height | 360 mm |
| Max. Height | 960 mm |
| Table Dimensions | 820×500×50 mm |
| Total Length | 1070 mm |
| Length of Handle | 970 mm |
| Net Weight | 65 / 75 kg |
TF30R TF50R Hydraulic table truc, part of the Lift tables line.
Hydraulic, air-hydraulic and electric lift tables for dock feeding and work positioning.
Dock feeding and packing
Published figures for this build: rated capacity 300 kg / 500 kg.
They reduce bending and manual lifting at packing stations and docks.
Lowered height decides how a pallet can be driven onto the deck.
Table size matches the pallet footprint and the load per cycle.
Scissor mechanisms carry the load vertically, with hydraulic or electric drive.
Match the tyre type to the floor surface rather than the price list. Compare rated capacity against the heaviest single load you move.
The specification sheet records Model: TF30R / TF50R; Load Capacity (kg): 300 kg / 500 kg; Lowest Height (mm): 360 mm; Max. Height (mm): 960 mm; Table Dimensions (mm): 820×500×50 mm; Total Length (mm): 1070 mm.
The specification sheet records Length of Handle (mm): 970 mm; Net Weight (kg): 65 / 75 kg.
Units are copied as published; convert them only when comparing models.
Each row in the table keeps the label and value from the source record.
An em dash marks a value the source record did not publish.
Rated figures apply at the standard load centre unless a row says otherwise.
Configuration follows the load, working height and site layout.
Send pallet size, door height and aisle width with the enquiry.
Dimensions in the table come from the source record.
Note any attachment that changes the load centre or the overall width.
List the models that clear each constraint before asking for a quote.
Check the machine weight against floor loading where the site is raised.
Match the power arrangement to the shifts and the working environment.
On the TF30R TF50R, keep the charging or refuelling position clear of the main traffic aisle.
List the attachments required, such as clamps, sideshift or rotator.
On the TF30R TF50R, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
Send photographs of the racking and the existing working area when possible.
On the TF30R TF50R, mark the stations where loads are picked up and dropped off each shift.
On the TF30R TF50R, the working area is kept clear of loose packaging and obstacles.
Unusual noise or movement is reported before further use.
On the TF30R TF50R, the operator checks load stability before each lift or move.
Attachments are secured before the machine leaves the station.
On the TF30R TF50R, attachments such as clamps or rotators are matched to the load shape.
Related models in the same group are listed on the family page.
On the TF30R TF50R, spare parts for wear items follow the parts manual after delivery.
A mixed enquiry can list this model together with other families.
On the TF30R TF50R, capacity above the rated lift height follows the mast curve.
Any option not listed should be confirmed in writing before order.
On the TF30R TF50R, the specification sheet is the binding reference for listed values.
Attachments are quoted separately once the base chassis is fixed.
On the TF30R TF50R, quotations follow the model, listed specification and destination port.
The booking reference is issued with the proforma invoice.
On the TF30R TF50R, the enquiry should include the quantity and destination port.
Quote the serial number and component name when ordering spares.
Ask for the specific certificate required for your target country.
The parts manual lists the wear items and their reference views.
The serial number identifies the build when parts are ordered later.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.