TF100SD Hydraulic table truc, rated capacity 1000Kg. They reduce bending and manual lifting at packing stations and docks.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | TF100SD |
| Load Capacity | 1000 kg |
| Lowest Height | 500 mm |
| Max. Height | 1700 mm |
| Table Dimensions | 1200×610 mm |
| Total Length | 1600 mm |
| Length of Handle | 1000 mm |
| Net Weight | 246 kg |
TF100SD Hydraulic table truc, part of the Lift tables line.
Hydraulic, air-hydraulic and electric lift tables for dock feeding and work positioning.
Packing station ergonomic lifting
Published figures for this build: rated capacity 1000 kg.
They reduce bending and manual lifting at packing stations and docks.
Lowered height decides how a pallet can be driven onto the deck.
They reduce bending and manual lifting at packing stations and docks.
Fixed and mobile tables fit production cells, picking and stuffing.
State any attachment required alongside the base model. Compare rated capacity against the heaviest single load you move.
The specification sheet records Model: TF100SD; Load Capacity (kg): 1000 kg; Lowest Height (mm): 500 mm; Max. Height (mm): 1700 mm; Table Dimensions (mm): 1200×610 mm; Total Length (mm): 1600 mm.
The specification sheet records Length of Handle (mm): 1000 mm; Net Weight (kg): 246 kg.
Those missing values can be requested directly through the enquiry form.
Options and attachments are listed separately from the base chassis.
Rated figures apply at the standard load centre unless a row says otherwise.
Units are copied as published; convert them only when comparing models.
Configuration follows the load, working height and site layout.
Send pallet size, door height and aisle width with the enquiry.
The enquiry should list any attachment the job requires.
Review the tyre type against the surface the machine will run on.
Match the power arrangement to the shifts and the working environment.
Compare the lowered height against the lowest door on the route.
Note any attachment that changes the load centre or the overall width.
On the TF100SD, check the lowest door, beam height and aisle the truck has to pass through.
Note any slope, threshold or step along the working route.
On the TF100SD, list the attachments required, such as clamps, sideshift or rotator.
Keep the charging or refuelling position clear of the main traffic aisle.
On the TF100SD, state the shifts per day so the power arrangement can be sized properly.
On the TF100SD, battery or fuel levels are checked at the start of each shift.
Attachments are secured before the machine leaves the station.
On the TF100SD, the working area is kept clear of loose packaging and obstacles.
Unusual noise or movement is reported before further use.
On the TF100SD, the layout drawing shows where each machine sits in the operation.
The receiving side pairs it with a dock ramp or platform where needed.
On the TF100SD, this machine usually works alongside pallet trucks and stacking equipment.
Storage cages and racking organise the loads it moves between stations.
On the TF100SD, any option not listed should be confirmed in writing before order.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the TF100SD, capacity above the rated lift height follows the mast curve.
The signed datasheet issued with the quotation is the binding version.
On the TF100SD, documents issued for an order are listed in the quotation.
Wear parts are supplied after delivery against the parts manual.
On the TF100SD, packing follows sea-freight practice for the chosen chassis.
Loading is recorded before the container is sealed.
Test and conformity documents follow the model and destination market.
Ask for the specific certificate required for your target country.
The parts manual lists the wear items and their reference views.
Questions
The listed rated capacity is 1000Kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
The listed service or net weight is 246 kg. This matters for floor loading, ramps and container plans.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.