RJ**ST Forklift attachment. The machine is specified against the load, floor and working height.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Catalog | Capacity / Mounting / Available / Opening / Arm Height / Arm / Frame / Overall / Minimum Truck / Weight |
| Range | Length / Width / Height / Carriage width |
| RJ14ST-A1 | 1400@500 / 1-2.5t / 420-1570 / 418 / 1190 / 1040 / 647 / 825 / 117 / 500 |
| RJ18ST-A1 | 1800@500 / 1-2.5t / 450-1670 / 418 / 1190 / 1040 / 685 / 825 / 117 / 500 |
| RJ18ST-A2 | 1900@500 / 1-2.5t / 550-1920 / 418 / 1190 / 1100 / 685 / 900 / 117 / 515 |
| RJ18ST-A3 | 1900@500 / 1-2.5t / 450-1730 / 418 / 1185 / 1040 / 647 / 825 / 117 / 500 |
| RJ18ST-A4 | 1900@500 / 1-2.5t / 450-1730 / 418 / 990 / 1040 / 647 / 825 / 117 / 550 |
| RJ18ST-B1 | 1900@500 / 1-2.5t / 450-1730 / 418 / 1185 / 1040 / 685 / 825 / 117 / 520 |
| RJ20ST-A1 | 2000@500 / 1-2.5t / 560-1850 / 460 / 1200 / 1010 / 750 / 1000 / 132 / 630 |
| RJ22ST-B1 | 2200@500 / 3-4.5t / 460-2300 / 460 / 1200 / 1680 / 750 / 1040 / 132 / 848 |
| RJ22ST-B2 | 2200@500 / 3-4.5t / 590-2400 / 460 / 1200 / 1680 / 750 / 1040 / 132 / 850 |
| RJ25ST-A3 | 2500@500 / 1-2.5t / 490-1778 / 460 / 1200 / 1010 / 750 / 1000 / 132 / 650 |
| RJ25ST-B1 | 2700@500 / 3-4.5t / 560-1850 / 460 / 1200 / 1010 / 750 / 1000 / 132 / 650 |
| RJ25ST-B3 | 2700@500 / 3-4.5t / 560-1850 / 460 / 1250 / 1010 / 750 / 1000 / 132 / 650 |
| RJ25ST-B5 | 2700@500 / 3-4.5t / 550-1920 / 460 / 1200 / 1100 / 750 / 1000 / 132 / 670 |
| RJ25ST-B6 | 2700@500 / 3-4.5t / 560-1850 / 460 / 1200 / 1010 / 750 / 1000 / 132 / 650 |
| RJ25ST-B7 | 2500@500 / 3-4.5t / 560-1850 / 460 / 1250 / 1010 / 750 / 1000 / 132 / 650 |
| RJ25ST-B8 | 2500@500 / 3-4.5t / 560-1850 / 460 / 800 / 1010 / 750 / 1000 / 132 / 500 |
| RJ25ST-B9 | 2500@500 / 3-4.5t / 490-1778 / 460 / 1200 / 1010 / 750 / 1000 / 132 / 650 |
| RJ30ST-B2 | 2700@500 / 3-4.5t / 550-1970 / 460 / 1200 / 1265 / 750 / 1030 / 132 / 670 |
| RJ30ST-B4 | 2700@500 / 3-4.5t / 460-1820 / 460 / 1200 / 1190 / 750 / 1000 / 132 / 680 |
| Model | Pressure value(Bar) / Flow value(L/min) |
| Maximum | Lateral movement / Clamping action |
| Least | Recommend / Maximum / Least |
| RJ**ST | 180 / 4 / 23 / 40 / 15 / 38 |
Gallery
All detail images published for this model.




RJ**ST Forklift attachment, part of the Special-purpose handling equipment line.
Hand trucks and trolleys, stair-climbing carts, paper-roll and coil clamps, forklift attachments, jacks and other auxiliary tools that do not fit the powered-vehicle families.
Site-specific lifting and moving tasks
Dimensions on the datasheet are checked against the site layout.
The enquiry should describe the station the equipment works at.
This item belongs to the broader SUNRISE material handling catalogue.
The enquiry should describe the station the equipment works at.
Confirm the aisle width against the pallet depth before choosing a chassis. Match the tyre type to the floor surface rather than the price list.
The specification sheet records Catalog: Capacity / Mounting / Available / Opening / Arm Height / Arm / Frame / Overall / Minimum Truck / Weight; Range: Length / Width / Height / Carriage width; RJ14ST-A1: 1400@500 / 1-2.5t / 420-1570 / 418 / 1190 / 1040 / 647 / 825 / 117 / 500; RJ18ST-A1: 1800@500 / 1-2.5t / 450-1670 / 418 / 1190 / 1040 / 685 / 825 / 117 / 500; RJ18ST-A2: 1900@500 / 1-2.5t / 550-1920 / 418 / 1190 / 1100 / 685 / 900 / 117 / 515; RJ18ST-A3: 1900@500 / 1-2.5t / 450-1730 / 418 / 1185 / 1040 / 647 / 825 / 117 / 500.
The specification sheet records RJ18ST-A4: 1900@500 / 1-2.5t / 450-1730 / 418 / 990 / 1040 / 647 / 825 / 117 / 550; RJ18ST-B1: 1900@500 / 1-2.5t / 450-1730 / 418 / 1185 / 1040 / 685 / 825 / 117 / 520; RJ20ST-A1: 2000@500 / 1-2.5t / 560-1850 / 460 / 1200 / 1010 / 750 / 1000 / 132 / 630; RJ22ST-B1: 2200@500 / 3-4.5t / 460-2300 / 460 / 1200 / 1680 / 750 / 1040 / 132 / 848; RJ22ST-B2: 2200@500 / 3-4.5t / 590-2400 / 460 / 1200 / 1680 / 750 / 1040 / 132 / 850; RJ25ST-A3: 2500@500 / 1-2.5t / 490-1778 / 460 / 1200 / 1010 / 750 / 1000 / 132 / 650.
The specification sheet records RJ25ST-B1: 2700@500 / 3-4.5t / 560-1850 / 460 / 1200 / 1010 / 750 / 1000 / 132 / 650; RJ25ST-B3: 2700@500 / 3-4.5t / 560-1850 / 460 / 1250 / 1010 / 750 / 1000 / 132 / 650; RJ25ST-B5: 2700@500 / 3-4.5t / 550-1920 / 460 / 1200 / 1100 / 750 / 1000 / 132 / 670; RJ25ST-B6: 2700@500 / 3-4.5t / 560-1850 / 460 / 1200 / 1010 / 750 / 1000 / 132 / 650; RJ25ST-B7: 2500@500 / 3-4.5t / 560-1850 / 460 / 1250 / 1010 / 750 / 1000 / 132 / 650; RJ25ST-B8: 2500@500 / 3-4.5t / 560-1850 / 460 / 800 / 1010 / 750 / 1000 / 132 / 500.
The specification sheet records RJ25ST-B9: 2500@500 / 3-4.5t / 490-1778 / 460 / 1200 / 1010 / 750 / 1000 / 132 / 650; RJ30ST-B2: 2700@500 / 3-4.5t / 550-1970 / 460 / 1200 / 1265 / 750 / 1030 / 132 / 670; RJ30ST-B4: 2700@500 / 3-4.5t / 460-1820 / 460 / 1200 / 1190 / 750 / 1000 / 132 / 680; Model: Pressure value(Bar) / Flow value(L/min); Maximum: Lateral movement / Clamping action; Least: Recommend / Maximum / Least.
The specification sheet records RJ**ST: 180 / 4 / 23 / 40 / 15 / 38.
Those missing values can be requested directly through the enquiry form.
Each row in the table keeps the label and value from the source record.
Options and attachments are listed separately from the base chassis.
Units are copied as published; convert them only when comparing models.
Configuration follows the load, working height and site layout.
The enquiry should list any attachment the job requires.
The listed figures follow the record; options are confirmed on the quotation.
Compare capacity first, then the lift height the job actually needs.
Check the chassis width against the aisle and the container door.
Note any attachment that changes the load centre or the overall width.
List the models that clear each constraint before asking for a quote.
On the RJ**ST, list the attachments required, such as clamps, sideshift or rotator.
Keep the charging or refuelling position clear of the main traffic aisle.
On the RJ**ST, send photographs of the racking and the existing working area when possible.
Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the RJ**ST, mark the stations where loads are picked up and dropped off each shift.
On the RJ**ST, the operator checks load stability before each lift or move.
Battery or fuel levels are checked at the start of each shift.
On the RJ**ST, the operator follows the rated capacity marked on the chassis.
Routine checks cover tyres, brakes, controls and visible leaks.
On the RJ**ST, related models in the same group are listed on the family page.
This machine usually works alongside pallet trucks and stacking equipment.
On the RJ**ST, attachments such as clamps or rotators are matched to the load shape.
Spare parts for wear items follow the parts manual after delivery.
On the RJ**ST, dimensions are checked against the source record before quoting.
Tyre choice should match the floor rather than the price list.
On the RJ**ST, the signed datasheet issued with the quotation is the binding version.
Capacity above the rated lift height follows the mast curve.
On the RJ**ST, the enquiry should include the quantity and destination port.
Quotations follow the model, listed specification and destination port.
On the RJ**ST, quote the serial number and component name when ordering spares.
Packing follows sea-freight practice for the chosen chassis.
The parts manual lists the wear items and their reference views.
Test and conformity documents follow the model and destination market.
The serial number identifies the build when parts are ordered later.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Special-purpose handling equipment related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.