Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

Steel Wire mesh cage for racking use — storage system

Steel Wire mesh cage for racking use Steel Wire mesh cage for racking use. Beam, shelving and cage layouts follow pallet size and aisle height.

Steel Wire mesh cage for racking use storage system — product photo 1 of 3

Ordering facts for the Steel Wire mesh cage for racking use

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

Steel Wire mesh cage for racking use specification

Values are copied from the source record in their original order and units.

Steel Wire mesh cage for racking use specification table
ParameterValue
ITEMMODEL Size(mm) Mesh size(mm) Wire dia. (mm) N.W(kg) Capacity (kg)
A seriesA-1 800*600*640 50*50 6 29 800
SA-15.8 27.7 600
A5.35.5 23.2 400
A4.85 20.8 300
B seriesB-1 1000*800*840 50*50 6 44.6 1000
SB-15.8 42.8 800
B5.35.5 35.6 600
B4.85 31 500
C seriesC-1 1200*1000*890 50*50 6 60.8 1500
SC-15.8 55.6 1200
C-250*100 6 53.4 1000
SC-25.8 48.4 800
Request price Datasheet (print / save as PDF) Ask about configuration

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

Steel Wire mesh cage for racking use Steel Wire mesh cage for racking use, part of the Storage systems line.

Racking, wire mesh containers, pallets and decking for pallet and bulk-goods storage.

Bulk-goods positions

The storage layout sets the aisle width the truck must enter.

Load beams are spaced to the pallet depth and stacking height.

Beam, shelving and cage layouts follow pallet size and aisle height.

The storage layout sets the aisle width the truck must enter.

Confirm the aisle width against the pallet depth before choosing a chassis. Check closed mast or chassis height against the lowest door on the route.

Specification walk-through

The specification sheet records ITEM: MODEL Size(mm) Mesh size(mm) Wire dia. (mm) N.W(kg) Capacity (kg); A series: A-1 800*600*640 50*50 6 29 800; SA-1: 5.8 27.7 600; A5.3: 5.5 23.2 400; A4.8: 5 20.8 300; B series: B-1 1000*800*840 50*50 6 44.6 1000.

The specification sheet records SB-1: 5.8 42.8 800; B5.3: 5.5 35.6 600; B4.8: 5 31 500; C series: C-1 1200*1000*890 50*50 6 60.8 1500; SC-1: 5.8 55.6 1200; C-2: 50*100 6 53.4 1000.

The specification sheet records SC-2: 5.8 48.4 800.

Options and attachments are listed separately from the base chassis.

An em dash marks a value the source record did not publish.

Rated figures apply at the standard load centre unless a row says otherwise.

Units are copied as published; convert them only when comparing models.

How to specify the right build

Configuration follows the load, working height and site layout.

The listed figures follow the record; options are confirmed on the quotation.

Door and beam heights decide which mast will clear the route.

Match the power arrangement to the shifts and the working environment.

Check the chassis width against the aisle and the container door.

Compare capacity first, then the lift height the job actually needs.

Compare the lowered height against the lowest door on the route.

  • State the shifts per day so the power arrangement can be sized properly.
  • Mark the stations where loads are picked up and dropped off each shift.
  • List attachments such as clamps, sideshift or rotator separately.

Site preparation and operating notes

On the Steel Wire mesh cage for racking use, keep the charging or refuelling position clear of the main traffic aisle.

List the attachments required, such as clamps, sideshift or rotator.

On the Steel Wire mesh cage for racking use, check the lowest door, beam height and aisle the truck has to pass through.

Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.

On the Steel Wire mesh cage for racking use, note any slope, threshold or step along the working route.

Operation and routine checks

On the Steel Wire mesh cage for racking use, battery or fuel levels are checked at the start of each shift.

Unusual noise or movement is reported before further use.

On the Steel Wire mesh cage for racking use, loads are kept low while travelling between stations.

The operator follows the rated capacity marked on the chassis.

How this model fits the operation

On the Steel Wire mesh cage for racking use, related models in the same group are listed on the family page.

Attachments such as clamps or rotators are matched to the load shape.

On the Steel Wire mesh cage for racking use, the layout drawing shows where each machine sits in the operation.

Storage cages and racking organise the loads it moves between stations.

Working conditions and honest limits

On the Steel Wire mesh cage for racking use, the specification sheet is the binding reference for listed values.

The signed datasheet issued with the quotation is the binding version.

On the Steel Wire mesh cage for racking use, capacity above the rated lift height follows the mast curve.

Attachments are quoted separately once the base chassis is fixed.

Delivery, documents and support

On the Steel Wire mesh cage for racking use, the enquiry should include the quantity and destination port.

The operation and parts material travel with the machine.

On the Steel Wire mesh cage for racking use, mixed equipment can be listed on one enquiry.

The booking reference is issued with the proforma invoice.

Test and conformity documents follow the model and destination market.

The serial number identifies the build when parts are ordered later.

Ask for the specific certificate required for your target country.

Before you order

  • The rated load applies at the standard load centre; carrying the load farther forward reduces the figure marked on the chassis plate.
  • Dimensions in the specification come from the source record — check them against the container door, the lowest door on the route and the aisle before ordering.
  • Any clamp, sideshift or rotator changes the load centre and must be listed alongside the base model.
  • Documents issued with the order: ISO 9001, ISO 14001 and ISO 18001 factory certificates, plus CE or GS where the model carries it, and the serial list for the shipment.
  • The parts manual ships with the machine; identify wear items by serial number and part name when reordering.

Questions

Questions buyers ask before ordering

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Which ports can the machine ship from?+

Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Storage systems related models

ModelCapacityLiftPowerTypical use
wire———Pallet and bulk storage
slotted———Returnable goods storage
SRWL***———Returnable goods storage
Heavy———Warehouse stocking
Mid———Racking organisation

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.