PZS150 / 250 / 350 Hand Truck. This item belongs to the broader SUNRISE material handling catalogue.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|
Gallery
All detail images published for this model.

PZS150 / 250 / 350 Hand Truck, part of the Special-purpose handling equipment line.
Hand trucks and trolleys, stair-climbing carts, paper-roll and coil clamps, forklift attachments, jacks and other auxiliary tools that do not fit the powered-vehicle families.
Pushed hand-truck transport
The machine is specified against the load, floor and working height.
Dimensions on the datasheet are checked against the site layout.
The machine is specified against the load, floor and working height.
This item belongs to the broader SUNRISE material handling catalogue.
Note cold store, outdoor gradient or container entry as a constraint. Check closed mast or chassis height against the lowest door on the route.
The specification sheet records Platform Length L is not published in the source record; Platform Width W is not published in the source record; Handle Height H is not published in the source record.
Remaining parameters are listed row by row in the specification table.
Those missing values can be requested directly through the enquiry form.
Each row in the table keeps the label and value from the source record.
Rated figures apply at the standard load centre unless a row says otherwise.
An em dash marks a value the source record did not publish.
Configuration follows the load, working height and site layout.
Door and beam heights decide which mast will clear the route.
The listed figures follow the record; options are confirmed on the quotation.
Compare the lowered height against the lowest door on the route.
Compare capacity first, then the lift height the job actually needs.
Review the tyre type against the surface the machine will run on.
Match the power arrangement to the shifts and the working environment.
On the PZS150 / 250 / 350, check the lowest door, beam height and aisle the truck has to pass through.
Send photographs of the racking and the existing working area when possible.
On the PZS150 / 250 / 350, keep the charging or refuelling position clear of the main traffic aisle.
Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the PZS150 / 250 / 350, note any slope, threshold or step along the working route.
On the PZS150 / 250 / 350, the operator follows the rated capacity marked on the chassis.
Battery or fuel levels are checked at the start of each shift.
On the PZS150 / 250 / 350, loads are kept low while travelling between stations.
Unusual noise or movement is reported before further use.
On the PZS150 / 250 / 350, related models in the same group are listed on the family page.
Storage cages and racking organise the loads it moves between stations.
On the PZS150 / 250 / 350, this machine usually works alongside pallet trucks and stacking equipment.
Spare parts for wear items follow the parts manual after delivery.
On the PZS150 / 250 / 350, the signed datasheet issued with the quotation is the binding version.
Tyre choice should match the floor rather than the price list.
On the PZS150 / 250 / 350, attachments are quoted separately once the base chassis is fixed.
Dimensions are checked against the source record before quoting.
On the PZS150 / 250 / 350, documents issued for an order are listed in the quotation.
Quotations follow the model, listed specification and destination port.
On the PZS150 / 250 / 350, packing follows sea-freight practice for the chosen chassis.
Wear parts are supplied after delivery against the parts manual.
The parts manual lists the wear items and their reference views.
Ask for the specific certificate required for your target country.
The operation material covers controls, checks and routine service points.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Special-purpose handling equipment related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.