Steel pallet Steel pallet. Beam, shelving and cage layouts follow pallet size and aisle height.

Specification
The source record did not publish a parameter table for this model. The listed figures below are limited to what the record confirms; request the missing parameters through the enquiry form.
Gallery
All detail images published for this model.




Steel pallet Steel pallet, part of the Storage systems line.
Racking, wire mesh containers, pallets and decking for pallet and bulk-goods storage.
Bulk-goods positions
Load beams are spaced to the pallet depth and stacking height.
Access floor space and column lines are checked against the design.
Beam, shelving and cage layouts follow pallet size and aisle height.
Racking and systems organise pallet and carton positions inside a warehouse.
Confirm the aisle width against the pallet depth before choosing a chassis. Match the tyre type to the floor surface rather than the price list.
The published parameters for this build are listed in the specification table.
Items the source record did not publish are shown as an em dash in the table.
Those missing items can be asked for directly through the enquiry form.
Options and attachments are listed separately from the base chassis.
Each row in the table keeps the label and value from the source record.
Rated figures apply at the standard load centre unless a row says otherwise.
Configuration follows the load, working height and site layout.
Dimensions in the table come from the source record.
Send pallet size, door height and aisle width with the enquiry.
Compare capacity first, then the lift height the job actually needs.
Review the tyre type against the surface the machine will run on.
List the models that clear each constraint before asking for a quote.
Check the machine weight against floor loading where the site is raised.
On the Steel pallet, mark the stations where loads are picked up and dropped off each shift.
Keep the charging or refuelling position clear of the main traffic aisle.
On the Steel pallet, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
Check the lowest door, beam height and aisle the truck has to pass through.
On the Steel pallet, note any slope, threshold or step along the working route.
On the Steel pallet, the operator checks load stability before each lift or move.
The working area is kept clear of loose packaging and obstacles.
On the Steel pallet, attachments are secured before the machine leaves the station.
The operator follows the rated capacity marked on the chassis.
On the Steel pallet, attachments such as clamps or rotators are matched to the load shape.
The layout drawing shows where each machine sits in the operation.
On the Steel pallet, a mixed enquiry can list this model together with other families.
The receiving side pairs it with a dock ramp or platform where needed.
On the Steel pallet, capacity above the rated lift height follows the mast curve.
The specification sheet is the binding reference for listed values.
On the Steel pallet, any option not listed should be confirmed in writing before order.
Attachments are quoted separately once the base chassis is fixed.
On the Steel pallet, mixed equipment can be listed on one enquiry.
Loading is recorded before the container is sealed.
On the Steel pallet, quote the serial number and component name when ordering spares.
Documents issued for an order are listed in the quotation.
The serial number identifies the build when parts are ordered later.
Test and conformity documents follow the model and destination market.
The parts manual lists the wear items and their reference views.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.