SR-116 Electric lift table, rated capacity 400 kg. Lowered height decides how a pallet can be driven onto the deck.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | SR-116 |
| Capacity | 400 kg |
| Product size | 1340x600x1100 mm |
| Table size | 1100x600 mm |
| Max height | 1600 mm |
| Min height | 460 mm |
| Driving motor | 400w |
| Lifting motor | 400w |
| Driving speed | 5~8 |
| Battery | 2x12v/33ah |
| Controller | 70A |
| N.w | 230 kg |
Gallery
All detail images published for this model.



SR-116 Electric lift table, part of the Lift tables line.
Hydraulic, air-hydraulic and electric lift tables for dock feeding and work positioning.
Press and bench lifting
Published figures for this build: rated capacity 400 kg.
Lift tables raise a pallet or work piece to a comfortable height.
Lowered height decides how a pallet can be driven onto the deck.
Scissor mechanisms carry the load vertically, with hydraulic or electric drive.
Lowered height decides how a pallet can be driven onto the deck.
Note cold store, outdoor gradient or container entry as a constraint. Confirm the aisle width against the pallet depth before choosing a chassis.
The specification sheet records Model: SR-116; Capacity (kg): 400 kg; Product size (mm): 1340x600x1100 mm; Table size (mm): 1100x600 mm; Max height (mm): 1600 mm; Min height (mm): 460 mm.
The specification sheet records Driving motor: 400w; Lifting motor: 400w; Driving speed (km/h): 5~8; Battery: 2x12v/33ah; Controller: 70A; N.w (kg): 230 kg.
Those missing values can be requested directly through the enquiry form.
Rated figures apply at the standard load centre unless a row says otherwise.
An em dash marks a value the source record did not publish.
Options and attachments are listed separately from the base chassis.
Configuration follows the load, working height and site layout.
Measure the pallet footprint before the chassis is shortlisted.
The listed figures follow the record; options are confirmed on the quotation.
Compare capacity first, then the lift height the job actually needs.
Note any attachment that changes the load centre or the overall width.
Check the machine weight against floor loading where the site is raised.
List the models that clear each constraint before asking for a quote.
On the SR-116, check the lowest door, beam height and aisle the truck has to pass through.
List the attachments required, such as clamps, sideshift or rotator.
On the SR-116, check headroom under beams, pipes and door frames along the route.
Keep the charging or refuelling position clear of the main traffic aisle.
On the SR-116, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the SR-116, loads are kept low while travelling between stations.
Routine checks cover tyres, brakes, controls and visible leaks.
On the SR-116, the working area is kept clear of loose packaging and obstacles.
Attachments are secured before the machine leaves the station.
On the SR-116, this machine usually works alongside pallet trucks and stacking equipment.
The layout drawing shows where each machine sits in the operation.
On the SR-116, storage cages and racking organise the loads it moves between stations.
Spare parts for wear items follow the parts manual after delivery.
On the SR-116, the signed datasheet issued with the quotation is the binding version.
The specification sheet is the binding reference for listed values.
On the SR-116, attachments are quoted separately once the base chassis is fixed.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the SR-116, the operation and parts material travel with the machine.
The booking reference is issued with the proforma invoice.
On the SR-116, wear parts are supplied after delivery against the parts manual.
Loading is recorded before the container is sealed.
Ask for the specific certificate required for your target country.
The operation material covers controls, checks and routine service points.
The serial number identifies the build when parts are ordered later.
Questions
The listed rated capacity is 400 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.