SR-109 Electric lift table, rated capacity 400 kg. They reduce bending and manual lifting at packing stations and docks.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | SR-109 |
| Capacity | 400 kg |
| Product size | 1240x600x1100 mm |
| Table size | 1000x600 mm |
| Max height | 900 mm |
| Min height | 420 mm |
| Driving motor | 400w |
| Lifting motor | 400w |
| Driving speed | 5~8 |
| Battery | 2x12v/33ah |
| Controller | 70A |
| N.w | 180 kg |
Gallery
All detail images published for this model.

SR-109 Electric lift table, part of the Lift tables line.
Hydraulic, air-hydraulic and electric lift tables for dock feeding and work positioning.
Production cell feeding
Published figures for this build: rated capacity 400 kg.
Lowered height decides how a pallet can be driven onto the deck.
They reduce bending and manual lifting at packing stations and docks.
Lift tables raise a pallet or work piece to a comfortable height.
Lowered height decides how a pallet can be driven onto the deck.
State any attachment required alongside the base model. Note cold store, outdoor gradient or container entry as a constraint.
The specification sheet records Model: SR-109; Capacity (kg): 400 kg; Product size (mm): 1240x600x1100 mm; Table size (mm): 1000x600 mm; Max height (mm): 900 mm; Min height (mm): 420 mm.
The specification sheet records Driving motor: 400w; Lifting motor: 400w; Driving speed (km/h): 5~8; Battery: 2x12v/33ah; Controller: 70A; N.w (kg): 180 kg.
Those missing values can be requested directly through the enquiry form.
An em dash marks a value the source record did not publish.
Options and attachments are listed separately from the base chassis.
Units are copied as published; convert them only when comparing models.
Configuration follows the load, working height and site layout.
Door and beam heights decide which mast will clear the route.
Send pallet size, door height and aisle width with the enquiry.
Note any attachment that changes the load centre or the overall width.
List the models that clear each constraint before asking for a quote.
Check the machine weight against floor loading where the site is raised.
Compare the lowered height against the lowest door on the route.
On the SR-109, state the shifts per day so the power arrangement can be sized properly.
Send photographs of the racking and the existing working area when possible.
On the SR-109, mark the stations where loads are picked up and dropped off each shift.
Note any slope, threshold or step along the working route.
On the SR-109, keep the charging or refuelling position clear of the main traffic aisle.
On the SR-109, the working area is kept clear of loose packaging and obstacles.
The operator checks load stability before each lift or move.
On the SR-109, routine checks cover tyres, brakes, controls and visible leaks.
Attachments are secured before the machine leaves the station.
On the SR-109, the layout drawing shows where each machine sits in the operation.
Spare parts for wear items follow the parts manual after delivery.
On the SR-109, attachments such as clamps or rotators are matched to the load shape.
The receiving side pairs it with a dock ramp or platform where needed.
On the SR-109, the specification sheet is the binding reference for listed values.
Any option not listed should be confirmed in writing before order.
On the SR-109, tyre choice should match the floor rather than the price list.
Dimensions are checked against the source record before quoting.
On the SR-109, documents issued for an order are listed in the quotation.
Wear parts are supplied after delivery against the parts manual.
On the SR-109, the enquiry should include the quantity and destination port.
Packing follows sea-freight practice for the chosen chassis.
The operation material covers controls, checks and routine service points.
The parts manual lists the wear items and their reference views.
Ask for the specific certificate required for your target country.
Questions
The listed rated capacity is 400 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.