SR-101 Electric lift table, rated capacity 200 kg. Table size matches the pallet footprint and the load per cycle.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | SR-101 |
| Capacity | 200 kg |
| Product size | 1000x600x1100 mm |
| Table size | 1000x600 mm |
| Min height | 290 mm |
| Driving motor | 200w |
| Driving speed | 5~8 |
| Battery | 2x12v/14ah |
| Controller | 70A |
| N.w | 58 kg |
Gallery
All detail images published for this model.


SR-101 Electric lift table, part of the Lift tables line.
Hydraulic, air-hydraulic and electric lift tables for dock feeding and work positioning.
Press and bench lifting
Published figures for this build: rated capacity 200 kg.
Table size matches the pallet footprint and the load per cycle.
Lift tables raise a pallet or work piece to a comfortable height.
They reduce bending and manual lifting at packing stations and docks.
Lowered height decides how a pallet can be driven onto the deck.
Note cold store, outdoor gradient or container entry as a constraint. Confirm the aisle width against the pallet depth before choosing a chassis.
The specification sheet records Model: SR-101; Capacity (kg): 200 kg; Product size (mm): 1000x600x1100 mm; Table size (mm): 1000x600 mm; Min height (mm): 290 mm; Driving motor: 200w.
The specification sheet records Driving speed (km/h): 5~8; Battery: 2x12v/14ah; Controller: 70A; N.w (kg): 58 kg.
Options and attachments are listed separately from the base chassis.
An em dash marks a value the source record did not publish.
Rated figures apply at the standard load centre unless a row says otherwise.
Each row in the table keeps the label and value from the source record.
Configuration follows the load, working height and site layout.
The listed figures follow the record; options are confirmed on the quotation.
Measure the pallet footprint before the chassis is shortlisted.
Compare the lowered height against the lowest door on the route.
Match the power arrangement to the shifts and the working environment.
Review the tyre type against the surface the machine will run on.
Note any attachment that changes the load centre or the overall width.
On the SR-101, measure the pallet footprint and the heaviest single load before comparing models.
Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the SR-101, keep the charging or refuelling position clear of the main traffic aisle.
Send photographs of the racking and the existing working area when possible.
On the SR-101, mark the stations where loads are picked up and dropped off each shift.
On the SR-101, routine checks cover tyres, brakes, controls and visible leaks.
The operator follows the rated capacity marked on the chassis.
On the SR-101, the operator checks load stability before each lift or move.
Battery or fuel levels are checked at the start of each shift.
On the SR-101, related models in the same group are listed on the family page.
The receiving side pairs it with a dock ramp or platform where needed.
On the SR-101, spare parts for wear items follow the parts manual after delivery.
The layout drawing shows where each machine sits in the operation.
On the SR-101, the signed datasheet issued with the quotation is the binding version.
Dimensions are checked against the source record before quoting.
On the SR-101, tyre choice should match the floor rather than the price list.
The specification sheet is the binding reference for listed values.
On the SR-101, quotations follow the model, listed specification and destination port.
Quote the serial number and component name when ordering spares.
On the SR-101, the booking reference is issued with the proforma invoice.
The operation and parts material travel with the machine.
Ask for the specific certificate required for your target country.
The operation material covers controls, checks and routine service points.
The serial number identifies the build when parts are ordered later.
Questions
The listed rated capacity is 200 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.