Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

GC series — Forklift attachment

GC series Forklift attachment. Selection starts from the load per move and the space around it.

GC series Forklift attachment — product photo 1 of 5

Ordering facts for the GC series

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

GC series specification

Values are copied from the source record in their original order and units.

GC series specification table
ParameterValue
CapacityCatalog / Mounting / Total Side / Carriage / Minimum Truck / Weight / Available
shiftWidth / Carriage width
@load CenterOrder No. / Class / (mm) / Forklift
1800@500GC15 / ±100 / 970 / 895 / 51 / 62 / 1-1.8t
2500@500GC20 / ±100 / 1040 / 895 / 55 / 62 / 2-2.5t
3000@500GC30 / ±100 / 1100 / 930 / 71.5 / 68 / 3t
3000@500GC30A / ±100 / 1250 / 930 / 77 / 68 / 3t
3000@500GC30B / ±100 / 1300 / 930 / 78 / 68 / 3t
3500@500GC35 / ±100 / 1100 / 930 / 85 / 73 / 3.5t
3500@500GC35A / ±100 / 1500 / 1300 / 124 / 73 / 3.5t
3500@500GC35B / ±100 / 1600 / 1300 / 132 / 73 / 3.5t
3500@500GC35C / ±100 / 1700 / 1400 / 139 / 73 / 3.5t
4500@500GC45 / ±100 / 1380 / 1080 / 115 / 73 / 4-4.5t
4500@500GC45A / ±100 / 1200 / 920 / 106 / 73 / 4-4.5t
4500@500GC45E / ±150 / 1380 / 1300 / 150 / 78 / 4-4.5t
6800@610GC70 / ±150 / 1845 / 1525 / 330 / 84 / 5-7t
6800@610GC70A / ±150 / 2430 / 1525 / 406 / 84 / 5-7t
6800@610GC70B / ±150 / 1532 / 1525 / 286 / 84 / 5-7t
ModelPressure value(Bar) / Flow value (Bar)
LeastMaximum / Least / Recommend
GC155 / 245 / 4 / 7.5 / 11
Request price Datasheet (print / save as PDF) Ask about configuration

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

GC series Forklift attachment, part of the Special-purpose handling equipment line.

Hand trucks and trolleys, stair-climbing carts, paper-roll and coil clamps, forklift attachments, jacks and other auxiliary tools that do not fit the powered-vehicle families.

Hand and trolley duties

Published figures for this build: rated capacity Catalog / Mounting / Total Side / Carriage / Minimum Truck / Weight / Available.

The enquiry should describe the station the equipment works at.

Dimensions on the datasheet are checked against the site layout.

Each build is quoted line by line once the duty cycle is confirmed.

This item belongs to the broader SUNRISE material handling catalogue.

Confirm the aisle width against the pallet depth before choosing a chassis. State any attachment required alongside the base model.

Specification walk-through

The specification sheet records Capacity: Catalog / Mounting / Total Side / Carriage / Minimum Truck / Weight / Available; shift: Width / Carriage width; @load Center: Order No. / Class / (mm) / Forklift; 1800@500: GC15 / ±100 / 970 / 895 / 51 / 62 / 1-1.8t; 2500@500: GC20 / ±100 / 1040 / 895 / 55 / 62 / 2-2.5t; 3000@500: GC30 / ±100 / 1100 / 930 / 71.5 / 68 / 3t.

The specification sheet records 3000@500: GC30A / ±100 / 1250 / 930 / 77 / 68 / 3t; 3000@500: GC30B / ±100 / 1300 / 930 / 78 / 68 / 3t; 3500@500: GC35 / ±100 / 1100 / 930 / 85 / 73 / 3.5t; 3500@500: GC35A / ±100 / 1500 / 1300 / 124 / 73 / 3.5t; 3500@500: GC35B / ±100 / 1600 / 1300 / 132 / 73 / 3.5t; 3500@500: GC35C / ±100 / 1700 / 1400 / 139 / 73 / 3.5t.

The specification sheet records 4500@500: GC45 / ±100 / 1380 / 1080 / 115 / 73 / 4-4.5t; 4500@500: GC45A / ±100 / 1200 / 920 / 106 / 73 / 4-4.5t; 4500@500: GC45E / ±150 / 1380 / 1300 / 150 / 78 / 4-4.5t; 6800@610: GC70 / ±150 / 1845 / 1525 / 330 / 84 / 5-7t; 6800@610: GC70A / ±150 / 2430 / 1525 / 406 / 84 / 5-7t; 6800@610: GC70B / ±150 / 1532 / 1525 / 286 / 84 / 5-7t.

The specification sheet records Model: Pressure value(Bar) / Flow value (Bar); Least: Maximum / Least / Recommend; GC: 155 / 245 / 4 / 7.5 / 11.

Those missing values can be requested directly through the enquiry form.

Options and attachments are listed separately from the base chassis.

Units are copied as published; convert them only when comparing models.

An em dash marks a value the source record did not publish.

How to specify the right build

Configuration follows the load, working height and site layout.

Door and beam heights decide which mast will clear the route.

Send pallet size, door height and aisle width with the enquiry.

Check the chassis width against the aisle and the container door.

Compare capacity first, then the lift height the job actually needs.

Check the machine weight against floor loading where the site is raised.

Note any attachment that changes the load centre or the overall width.

  • List the load per move, lift height and floor surface before comparing models.
  • List attachments such as clamps, sideshift or rotator separately.
  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.

Site preparation and operating notes

On the GC series, list the attachments required, such as clamps, sideshift or rotator.

Keep the charging or refuelling position clear of the main traffic aisle.

On the GC series, note any slope, threshold or step along the working route.

Mark the stations where loads are picked up and dropped off each shift.

On the GC series, state the shifts per day so the power arrangement can be sized properly.

Operation and routine checks

On the GC series, attachments are secured before the machine leaves the station.

Battery or fuel levels are checked at the start of each shift.

On the GC series, the operator follows the rated capacity marked on the chassis.

The operator checks load stability before each lift or move.

How this model fits the operation

On the GC series, related models in the same group are listed on the family page.

Spare parts for wear items follow the parts manual after delivery.

On the GC series, a mixed enquiry can list this model together with other families.

Storage cages and racking organise the loads it moves between stations.

Working conditions and honest limits

On the GC series, the signed datasheet issued with the quotation is the binding version.

The specification sheet is the binding reference for listed values.

On the GC series, tyre choice should match the floor rather than the price list.

Any option not listed should be confirmed in writing before order.

Delivery, documents and support

On the GC series, the enquiry should include the quantity and destination port.

Wear parts are supplied after delivery against the parts manual.

On the GC series, mixed equipment can be listed on one enquiry.

Quote the serial number and component name when ordering spares.

Test and conformity documents follow the model and destination market.

The operation material covers controls, checks and routine service points.

Ask for the specific certificate required for your target country.

Before you order

  • The rated load applies at the standard load centre; carrying the load farther forward reduces the figure marked on the chassis plate.
  • Dimensions in the specification come from the source record — check them against the container door, the lowest door on the route and the aisle before ordering.
  • Attachment options are confirmed on the quotation; their weight and width are counted against the residual capacity.
  • Documents issued with the order: ISO 9001, ISO 14001 and ISO 18001 factory certificates, plus CE or GS where the model carries it, and the serial list for the shipment.
  • Spare parts follow the parts manual supplied with the machine; quote the serial number and component name when ordering wear parts.

Questions

Questions buyers ask before ordering

What load centre applies to the rating?+

The specification lists a load centre of Order No. / Class / (mm) / Forklift. Loads carried farther forward reduce rated capacity.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Special-purpose handling equipment related models

ModelCapacityLiftPowerTypical use
WCR-120E/030C———Site-specific lifting and moving tasks
WPR-10———Site-specific lifting and moving tasks
ST02(2ton———Manual pallet jack duty
STFL32X———Lifting and moving pallets
ST880X———Manual pallet jack duty

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.