Self Dumping Hopper Self Dumping Hopper. Dimensions on the datasheet are checked against the site layout.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | Size LxWxH (mm) Capacity (kg) Weight (kg) |
| TS-15 | 0.15 815X760X580 1200 80 |
| TS-30 | 0.3 1235x840x750 1500 115 |
| TS-60 | 0.6 1525x865x870 2000 145 |
| TS-90 | 0.9 1525x1215x870 2000 155 |
| TS-110 | 1.1 1700x1215x1045 2000 195 |
| TS-160 | 1.6 2073x1066x1248 2000 235 |
| TS-200 | 2 2073x1316x1248 2000 280 |
| TS-250 | 2.5 2073x1566x1248 2000 300 |
| TS-300 | 3 2073x1866x1248 2000 331 |
Gallery
All detail images published for this model.









Self Dumping Hopper Self Dumping Hopper, part of the Special-purpose handling equipment line.
Hand trucks and trolleys, stair-climbing carts, paper-roll and coil clamps, forklift attachments, jacks and other auxiliary tools that do not fit the powered-vehicle families.
Site-specific lifting and moving tasks
Dimensions on the datasheet are checked against the site layout.
Selection starts from the load per move and the space around it.
The enquiry should describe the station the equipment works at.
The machine is specified against the load, floor and working height.
Confirm the aisle width against the pallet depth before choosing a chassis. Check closed mast or chassis height against the lowest door on the route.
The specification sheet records Model (cbm): Size LxWxH (mm) Capacity (kg) Weight (kg); TS-15: 0.15 815X760X580 1200 80; TS-30: 0.3 1235x840x750 1500 115; TS-60: 0.6 1525x865x870 2000 145; TS-90: 0.9 1525x1215x870 2000 155; TS-110: 1.1 1700x1215x1045 2000 195.
The specification sheet records TS-160: 1.6 2073x1066x1248 2000 235; TS-200: 2 2073x1316x1248 2000 280; TS-250: 2.5 2073x1566x1248 2000 300; TS-300: 3 2073x1866x1248 2000 331.
Options and attachments are listed separately from the base chassis.
Each row in the table keeps the label and value from the source record.
An em dash marks a value the source record did not publish.
Those missing values can be requested directly through the enquiry form.
Configuration follows the load, working height and site layout.
Send pallet size, door height and aisle width with the enquiry.
Measure the pallet footprint before the chassis is shortlisted.
Check the chassis width against the aisle and the container door.
Match the power arrangement to the shifts and the working environment.
Compare the lowered height against the lowest door on the route.
Compare capacity first, then the lift height the job actually needs.
On the Self Dumping Hopper, list the attachments required, such as clamps, sideshift or rotator.
Check the lowest door, beam height and aisle the truck has to pass through.
On the Self Dumping Hopper, note any slope, threshold or step along the working route.
Mark the stations where loads are picked up and dropped off each shift.
On the Self Dumping Hopper, send photographs of the racking and the existing working area when possible.
On the Self Dumping Hopper, unusual noise or movement is reported before further use.
The working area is kept clear of loose packaging and obstacles.
On the Self Dumping Hopper, attachments are secured before the machine leaves the station.
Loads are kept low while travelling between stations.
On the Self Dumping Hopper, this machine usually works alongside pallet trucks and stacking equipment.
A mixed enquiry can list this model together with other families.
On the Self Dumping Hopper, attachments such as clamps or rotators are matched to the load shape.
The receiving side pairs it with a dock ramp or platform where needed.
On the Self Dumping Hopper, dimensions are checked against the source record before quoting.
The signed datasheet issued with the quotation is the binding version.
On the Self Dumping Hopper, tyre choice should match the floor rather than the price list.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the Self Dumping Hopper, loading is recorded before the container is sealed.
Quote the serial number and component name when ordering spares.
On the Self Dumping Hopper, packing follows sea-freight practice for the chosen chassis.
Wear parts are supplied after delivery against the parts manual.
Test and conformity documents follow the model and destination market.
The serial number identifies the build when parts are ordered later.
The parts manual lists the wear items and their reference views.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Special-purpose handling equipment related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.